Thermal behaviour and firing characteristics of Zr/KClO4 primer mixture containing CuO

The effect of CuO on the thermal behaviour of Zr/KClO₄ primer mixtures was studied by thermoanalytical techniques, and the Bruceton method and its related calculation. It was found that the CuO catalytically promoted the decomposition of Zr/KClO₄ primer mixtures and shifted the exothermic peak of DSC curves to lower temperatures. In addition, the Zr/KClO₄ primer mixture containing CuO had a significant effect on the firing characteristics of electro-explosive devices.     

Spectral and photochemical characteristics of CdSe nanoparticles stabilized in polymer-containing media

The optical characteristics of CdSe nanoparticles, produced in aqueous solutions and polymer films in the reaction of cadmium chloride and sodium selenosulfate, were studied. The main parameters that make it possible to vary the forbidden band width were identified. The absorption, photoluminescence, Raman, and nonstationary decolorization spectra of CdSe nanoparticles of various sizes were analyzed. It was demonstrated that under the conditions of pulsed irradiation the CdSe nanoparticles are capable of accumulating excess electrons and inducing redox transformations in components of the solution (oxygen, methylviologen, and sulfite ions). __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 3, pp. 150–155, May–June, 2006.     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

Ga^3＋的新萃取体系的界面特性和胶团化作用研究

研究了Ｇａ~（３＋）协萃体系（Ｇａ~（３＋）－Ｄ_２ＥＨＰＡ－Ｈ_２ＭＰＡ－正十二烷－Ｈ_２ＳＯ_４）的界面吸附和胶团形成热力学，发现该萃取体系中［Ｈ_２ＭＰＡ］影响Ｄ_２ＥＨＰＡ和Ｈ_２ＭＰＡ的界面吸附性质。在中、高［Ｈ_２ＭＰＡ］范围内Ｄ_２ＥＨＰＡ与Ｈ_２ＭＰＡ的界面吸附行为相反，Ｄ_２ＥＨＰＡ的存在也影响Ｈ_２ＭＰＡ的界面吸附行为。研究了界面张力与各因素关系的数学模型，并获得某些胶团形成和界面吸附特性的物化参数。     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Effects of type and number of impellers and liquid viscosity on the power characteristics of mechanically agitated gas—liquid systems

Effect of the type and number of high-speed impellers installed on a common shaft on the power characteristics was investigated in water and glucose solutions of different concentration. Different configurations of the Rushton or Smith turbines, pitched blade turbines, propeller, and A 315 impeller were tested. Measurements of power consumption were carried out within the transitional and turbulent regime of the fluid flow using the strain gauge method. Baffled agitated vessels with inner diameter of 0.288 m and 0.634 m were used for the experiments. Liquid height in the vessels was equal to the vessel diameter or it was twice higher. The relative power consumption was compared for different configurations of the impellers. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

Capillary gas chromatography of pesticide residues in foods: Application of a split/splitless inlet system

Residue mixtures of pesticides in foods which were difficult to separate by packed-column gas chromatography were determined by capillary gas chromatography and electron capture detection. Manual injections of sample and reference standard were made with a 10 μL syringe on a septum-enclosed, split/ splitless inlet system. Optimal peak height repeatability (± 3%( was achieved with three-μL injections which were made within time periods of four hours or less. The average linearity coefficient (slope( obtained for detector response as a function of solution concentration was 1.1.     

超临界流体萃取仪器的研制

本文报道了以国产原配件为基础，成功地研制了分析规模的超临界流体萃取仪器、并对仪器性能进行了全面考察，仪器性能稳定，重现性良好（ＲＳＤ＜３．１％），定量线性关系可靠，可满足定量萃取的要求。