Reducing and annular Dehn fillings

If two Dehn fillings on a simple manifold create a reducible manifold and an annular manifold respectively, then the distance between those filling slopes is known to be at most two. Moreover, Eudave-Muñoz and Wu gave infinitely many examples of manifolds admitting reducing and annular Dehn fillings at distance two. In this paper, we complement their examples to establish a complete list of simple manifolds admitting such a pair of Dehn fillings.

     

Stability of weak solutions to the compressible Navier–Stokes equations in bounded annular domains

We prove the Lipschitz continuous dependence on initial data of global spherically symmetric weak solutions to the Navier–Stokes equations of a viscous polytropic ideal gas in bounded annular domains with the initial data in the Lebesgue spaces. Copyright © 2007 John Wiley & Sons, Ltd.     

Diffraction of spherical waves at an annular aperture in the use of the boundary diffraction wave theory: A comparison of different diffraction integral approaches

The integral expression for divergent spherical waves diffracted at an annular aperture is derived based on the theory of the boundary diffraction wave. The expressions for divergent spherical waves diffracted at a circular aperture and a disk, and the axial field are treated as the special cases of our general one. Numerical calculation results for axial and transversal intensity distributions are given to compare our results with the Kirchhoff diffraction integral, first and second Rayleigh diffraction integrals. As expected, our results are in agreement with those in the use of the Kirchhoff diffraction integral, but the computer time is reduced greatly by using the boundary diffraction wave theory. The four diffraction formulae are shown to be consistent for axial and transversal intensity distributions, if the source and observation points are positioned equally from the aperture, or the observation point is located enough far from the aperture. Otherwise, the mean value of the first and second Rayleigh diffraction integrals is equal to the result of the boundary diffraction wave theory.     

Large amplitude free vibration of shear deformable laminated composite annular sector plates by a sector p-element

A sector p-element is presented for the large amplitude free vibration analysis of laminated composite annular sector plates. The effects of out-of-plane shear deformations, rotary inertia, and geometric non-linearity are taken into account. The shape functions are derived from the shifted Legendre orthogonal polynomials. The element stiffness and mass matrices are integrated analytically with the aid of symbolic computing. The method consists of modeling the annular sector plate as one element. The accuracy of the solution is improved simply by increasing the polynomial order. The time-dependent coefficients are described by a truncated Fourier series. The equations of free motion are obtained using the harmonic balance method and solved by the linearized updated mode method. Results for the linear and non-linear frequencies of clamped laminated composite annular sector plates are obtained. The case of a clamped isotropic annular sector plate is also shown. The linear frequencies are found to converge rapidly downwards as the polynomial order is increased. Comparisons of the linear frequencies with published results show excellent agreement. The effects of sector angle, inner-to-outer radius ratio, thickness-to-outer radius ratio, moduli ratio, number of plies, and layup sequence on the backbone curves are also investigated. It is shown that the hardening behavior increases or decreases depending on geometric and lamination parameters.     

黏弹性环形板的临界载荷及动力稳定性

利用线性黏弹性力学的Boltzmann叠加原理,在考察位移单值性条件的基础上,给出黏弹性环形板非线性动力学分析的初边值问题。通过Galerkin方法和引进新的状态变量,将其化归为四维非线性非自治常微分方程组,从而得到黏弹性环形板的四种临界载荷,同时考察了几何缺陷对黏弹性薄板临界载荷的影响。根据Floquet理论,得出黏弹性形板在周期激励下的线性动力稳定性判据。综合使用非线性动力学中的数值分析方法,研究了参数对黏弹性环形板非线性动力稳定性的影响。     

可实现偏振无关单向传输的二维硅基环形孔光子晶体

基于光子晶体来构筑偏振无关光二极管在光电集成领域具有重大的应用价值.首先提出了一种环形孔光子晶体,能带结构显示其对横电及横磁模式同时展现出显著的方向带隙.以此构建了三角形状的环形孔光子晶体,利用时域有限差分法计算其透过谱及场分布图,发现该结构能实现偏振无关单向传输特性,然而正向透过率太低(约20%).进一步引入尺寸较小的三角形状的环形孔光子晶体构成光子晶体异质结结构,有效地提高了偏振无关单向传输性能,正向透过率增大了一倍.通过界面结构的调整,正向透过率进一步增大,优化后的环形孔光子晶体异质结结构能同时对类横电及类横磁模式入射光实现单向传输,且正向透过率达到了44%.     

轴向磁场对环形浅液池内硅熔体热毛细对流的影响

为了更好地了解轴向磁场对温度梯度作用下Marangoni-热毛细对流的影响,采用有限差分法对环形浅液池内硅熔体制单晶的流动进行了数值模拟.研究了三种不同边界条件下,Ha数分别为0、10、20、30对应下硅熔体内部流动强度和自由表面速度.结果表明,轴向磁场对浅液池内的Marangoni对流、热毛细对流和耦合的Marangoni-热毛细对流都有较好的抑制作用,且随着磁场强度的增强,抑制作用增加,更有利于提高晶体的结晶质量.当磁场强度和底部热流密度一定时,随着水平温度梯度的增加,靠近内壁的流动得到增强,外壁附近流动反而减弱.     

环形方管道中爆轰胞格的三维研究

通过实验和三维数值模拟研究了爆轰波在环形管道内的传播。实验采用烟迹板记录了爆轰波的胞格结构。数值模拟基于带化学反应的三维Euler方程,采用五阶精度的WENO格式捕捉激波,采用具有TVD性质的三阶Runge-Kutta法处理时间项,并结合并行技术,对爆轰波的传播进行了数值研究。结果表明,环形管道外壁为收敛壁面,由于其对流场的压缩效应,外壁面及附近的胞格较小,且较均匀。而内壁为发散壁面,其对流场起稀疏效应,内壁面及附近的胞格较大,且呈周期性变化。同时, 不同壁面的胞格结构均出现了拍波(slapping wave),其形状呈弯曲的折线。     

Green’s function solution for transient heat conduction in annular fin during solidification of phase change material

The Green’s function method is applied for the transient temperature of an annular fin when a phase change material (PCM) solidifies on it. The solidification of the PCMs takes place in a cylindrical shell storage. The thickness of the solid PCM on the fin varies with time and is obtained by the Megerlin method. The models are found with the Bessel equation to form an analytical solution. Three different kinds of boundary conditions are investigated. The comparison between analytical and numerical solutions is given. The results demonstrate that the significant accuracy is obtained for the temperature distribution for the fin in all cases.