环形磁场金属等离子体源冷却流场的数值模拟与优化

环形磁场金属等离子体源作为一种全新的等离子体源结构,可用于产生高度离化、无大颗粒、高密度的离子束流,但传统流道结构不能保证其高效、均匀散热,大功率工作时可能引起密封胶圈的烧蚀失效,需对其冷却流场进行优化设计.利用Solidworks Flow Simulation软件对等离子体源冷却流道进行模拟,分析出入水孔分布角度、孔数、孔径以及入水孔高度对冷却效果的影响规律,并对流道结构参数进行优化.结果表明,增大水孔的周向分布范围,有利于提高散热的均匀性;入水孔设置在结构上层有利于减少冷却水的温度分层现象,使铜套和密封胶圈都处于较好的冷却状态;适当减小孔径有利于增大冷却水射流速度,增大湍流程度强化传热,提高换热效率.优化后的流场结构可以提高冷却水的利用率,在相同流量条件下获得更好的冷却效果,改善等离子体源的放电稳定性,为环形磁场金属等离子体源的冷却结构设计提供理论依据.     

非稳腔输出环状激光束的传输特性

本文从菲涅耳衍射积分公式出发研究了激光器非稳腔输出环状光束在空间的传输规律.由轴上光强的极值点位置给出了划分非稳腔传输空间的近场、中场和远场区域公式.理论计算结果表明,非稳腔输出端环状光束在中场区域激光能量逐渐向轴心方向转移,而在远场变为爱里型圆盘状光束的过程.在非稳腔脉冲TEA CO_2激光器上测得的实验结果与理论计算结果很好地符合.     

Effets des forces de Coriolis sur le seuil convectif stationnaire d'une couche liquide confinée en cellule de Hele–Shaw annulaire en rotationEffects of the Coriolis forces on the stationary convectif threshold of a liquid layer confined in an annular Hele–Shaw Cell in rotation

The convective instability of a horizontal liquid layer confined in an annular Hele–Shaw cell subject to a constant rotation and submitted to a centrifugal gradient of temperature is investigated. Using a linear stability analysis, we study the effects of both Coriolis forces and curvature aspect on the stationary convective threshold when the Prandtl number is of the order of unity or larger than unity. We show that the Coriolis forces have a stabilizing effect, and the wave number is independent of these forces. However, a multicellular regime in the radial direction is observed for small Ekman numbers. The results related to the influence of the curvature are also shown. To cite this article: S. Ramezani et al., C. R. Mecanique 330 (2002) 633–640.     

用环形抛光机磨制高精度的平面镜

本文描述了在一台国产0.6m环形抛光机上磨制Φ80×10mm、φ150×12mm、φ220×28mm三块K9材料平面镜及一块φ120×15mm微晶料平面镜的实验过程,从工艺角度归纳出了若干磨制规律。     

The effects of fluctuating body forces on annular liquid jets

Summary The nonlinear dynamics of axisymmetric, inviscid, incompressible, thin, annular liquid jets subjected to fluctuating body forces is studied numerically by means of an adaptive finite difference method which maps the time-dependent, curvilinear geometry of the jet into a unit square. The fluctuating body forces may arise from fluctuations in the gravitational acceleration in inertial frames or from the acceleration of a non-inertial frame of reference which translates parallelly to an inertial one. It is shown that both the pressure coefficient and the axial location at which the annular jet becomes a solid one are periodic functions of time with a period equal to that of the imposed body force fluctuations, and that their magnitude increases as the amplitude of the body force fluctuations is increased. It has also been shown that, for both intermittent, sinusoidal or rectangular excitations, increases in the frequency of the excitation result in the creation of superharmonics, broad, albeit peaked, spectra, and closed phase planes with many loops.The research reported in this paper was supported by Project PB91-0767 from the D.G.I.C.Y.T. of Spain.     

Friction factor and holdup studies for lubricated pipelining—I. Experiments and correlations

Results from new experiments on the lubricated pipelining of emulsified waxy crude oil and No. 6 fuel oil are presented and compared with other sources of literature. A correlation formula which estimates the holdup fraction is introduced and evaluated for all available experimental data. A simple theory is given which is based on the concentric core-annular flow model and leads to a Reynolds number and friction factor which reduce a large body of experimental data onto one curve; with the best results in the high Reynolds number flow regime.     

Correlations predicting frictional pressure drop and liquid holdup during horizontal gas-liquid pipe flow with a small liquid holdup

Experimental data and correlations available in the literature for the liquid holdup ε_L and the pressure gradient ΔP_TP/L for gas-liquid pipe flow, generally, do not cover the domain 0 < ε_L < 0.06. Reliable pressure-drop correlations for this holdup range are important for calculating flow rates of natural gas, containing traces of condensate. In the present paper attention is focused on reliable measurements of ε_L and ΔP_TPIL values and on the development of a phenomenological model for the liquid-holdup range 0 < ε_L < 0.06. This model is called the “apparent rough surface” model and is referred to as the ARS model. The experimental results presented in this paper refer to air-water and air-water + ethyleneglycol systems with varying transport properties in horizontal straight smooth glass tubes under steady-state conditions. The holdup and pressure gradient values predicted with the ARS model agree satisfactorily with both our experimental results and data obtained from the literature referring to small liquid-holdup values 0 < ε_L < 0.06. Further, it has been shown that in the domain 38 < < 72 mPa m the interfacial tension of the gas-liquid system has no significant effect on the liquid holdup. The pressure gradient, however, increases slightly with decreasing surface tension values.     

环形板与扇形板弯曲问题的级数解

由板的基本方程,将位移和荷载沿环向展开为傅里叶级数,可得用傅里叶级数及多项式表示的环形板和直边简支的扇形板的级数解.还用富里叶级数处理沿径向分段连续荷载的问题.     

中心有刚体质量的环形薄板的非线性强迫振动

本文研究中心带有刚体质量外部固定铰支或活动铰支的环形薄板的非线性强迫振动。考虑板的弯曲变形、面内位移和几何非线性，用哈米尔顿原理建立板的运动方程，用Ｋａｎｔｏｒｏｖｉｃｈ平均法消去时间变量，然后用数值积分求得非线性振动的振幅随激振力的大小及激振力的频率而变化的关系。求解过程中用打靶法逐步改进未知参量，以保证边界条件的满足。最后讨论薄膜力、激振力的分布、板的内外半径比等因素对响应的影响     

Direct Imaging of Octahedral Distortion in a Complex Molybdenum Vanadium Mixed Oxide

Complex Mo,V‐based mixed oxides that crystallize in the orthorhombic M1‐type structure are promising candidates for the selective oxidation of small alkanes. The oxygen sublattice of such a complex oxide has been studied by annular bright field scanning transmission electron microscopy. The recorded micrographs directly display the local distortion in the metal oxygen octahedra. From the degree of distortion we are able to draw conclusions on the distribution of oxidation states in the cation columns at different sites. The results are supported by X‐ray diffraction and electron paramagnetic resonance measurements that provide integral details about the crystal structure and spin coupling, respectively.