含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Thermoanalytical procedures to identify the morphology of polycrystalline materials

Polypropylenes of differing morphologies were examined by differential thermal analysis. The problems of reordering during the programmed heating are discussed. Four potential procedures by which the reordering could be inhibited are considered, and three of these are experimentally assessed. Their advantages and deficiencies are identified. Two pretreatments, an etching and a crosslinking, are recognised as able to qualitatively characterise the initial morphology, with a preference for the former. A test to identify the occurrence of reordering is identified. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

High-T c superconducting magnetic bearings for rotation-based devices

Summary A Modified-Melt-Powder-Melt-Growth (MMPMG) technique has been developed for the preparation of melt-textured Y-Ba−Cu−O pellets. To test their performances, the samples were characterized with respect to their microstructure, pinning strength and interaction force with permanent magnets. A superconducting magnetic bearing was built and integrated in a levitating flywheel system for energy storage. Paper presented at the “VII Congresso SATT?, Torino, 4–7 October 1994. Under a Fondazione Confalonieri grant.     

A generalized Adadorov theory for anisotropic thin-walled beams

This paper presents a generalized Adadorov theory for anisotropic thin—walled beams. The theory takes account of the shear strain of the middle surface, which exerts a significant influence on the anisotropic thin-walled beams. A new approach is established to solve the governing equations, which have the same form for both open and closed section beams. The numerical examples show that the effects of the shear strain cannot be neglected for this class of beams.This work was part of research project supported by the National Natural Science Foundation of China     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

A co‐ordinate system independent streamwise upwind method for fluid flow computation

A new co‐ordinate invariant streamwise upwind formulation for convection dominated flows is developed. The eddy diffusivity/viscosity is added directly to the equations in order to remove the oscillations in the solution. The equations then can be solved by any high‐order scheme and the solution retains the accuracy of the high‐order scheme. The accuracy and reduced lateral thickness growth rate are demonstrated with several numerical examples, including pure convective flows and lid‐driven cavity flow. The lateral spreading due to the numerical diffusion is controlled by the anisotropic tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

A posteriori H1 error estimation for a singularly perturbed reaction diffusion problem on anisotropic meshes

The paper deals with a singularly perturbed reaction diffusionmodel problem. The focus is on reliable a posteriori error estimatorsfor the H¹ seminorm that can be applied to anisotropic finiteelement meshes. A residual error estimator and a local problemerror estimator are proposed and rigorously analysed. They arelocally equivalent, and both bound the error reliably. Threemodifications of these estimators are introduced and discussed. Much attention is given to the performance of the error estimatorin numerical experiments. This helps to identify those estimatorsthat are suitable for practical applications.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.