Visible photoluminescence from a-Si : H/SiO2 superlattices fabricated by UHV evaporation

Hydrogenated amorphous-Si/SiO₂ (a-Si:H/SiO₂) superlattices with different a-Si : H thickness in the range of a few nanometers have been fabricated by ultra high vacuum evaporator (UHV evaporator). The photoluminescence (PL) of our superlattices is observed in the visible spectral region and the peak energy shifts to higher energy as the a-Si : H layer thickness decreases. The temperature dependence of the PL spectra reveals four sub-bands by fitting. Bands at 2.2, 1.9, 1.65 and 1.45 eV are detected and are attributed to E′δ centers, nonbridging-oxygen–hole centers (NBOHC), Si/SiO₂ interface and a-Si : H layer, respectively. We explain the overall blueshift of the PL spectra by the modification of the contribution of these sub-bands.     

Study of metal containing hydrogenated carbon films by STM/AFM and SAXS

Metal-containing amorphous hydrogenated carbon films are of high interest for industrial applications because of their excellent frictional properties, their high abrasive wear resistance and their electrical conductivity, which can be adjusted in a range of 10–12 orders of magnitude. In order to get insight into the mechanical and electrical properties it is necessary to study the nanostructure of the films. The structure consists of small nanometer sized metallic or carbidic particles, which are embedded in a three dimensional amorphous hydrogen-carbon matrix. Anomalous small angle X-ray scattering (ASAXS) and scanning tunneling microscopy (STM) have been used to determine size- and distance-distributions of the particles as a function of metal content. Problems and restrictions of both methods will be discussed. Furthermore the capabilities of scanning probe techniques to distinguish different materials on a nanometer scale (material contrast) have been studied employing barrier height imaging (dI/dz) and friction force microscopy.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

Atomic Vibrational Dynamics of Thin Films Studied by Nuclear Resonant Inelastic X-Ray Scattering: Amorphous Tb1−x Fe x Alloys

Hyperfine Interactions - Nuclear resonant inelastic X-ray scattering (NRIXS) of 14.4125 keV synchrotron radiation was used to measure directly the partial vibrational density of states (VDOS),...     

Fast deposition of amorphous hydrogenated carbon films using a supersonically expanding arc plasma

Experiments concerning the growth rate and quality of an amorphous hydrogenated carbon film deposited in a reactor based on the supersonic expansion of an arc plasma are reported. In order to be able to calculate the deposition rate, an existing flow model has been completed with chernical reaction rate equations. The methane gas that is injected in the arc appears to be dissociated and ionized completely. The calculated deposition rates agree well with the experimental values obtained within-situ ellipsometry. The growth rates are an order of magnitude larger than those reported in the literature. Still, the film quality, expressed in terms of refractive index, optical bandgap, and hardness, is similar to those obtained by other authors.     

退火温度对a-Se0.70Ge0.15Sb0.15薄膜的结构和光学性质的影响

研究了退火温度对Se0.70Ge0.15Sb0.15薄膜的影响.通过热蒸发技术,在300K温度下将大块无定形Se0.70Ge0.15Sb0.1s沉积在石英和玻璃衬底上.研究发现,未经过退火处理的薄膜结构和在300K,1.33×10-5Pa下退火1小时后的薄膜结构都是无定形结构,而在同样气压470K温度下退火1小时的薄膜有结晶现象.通过在300 2 500nm范围内垂直入射光方向上透射率和反射率的测试,研究了薄膜的一些光学参数,如消光系数(k),折射系数(n)和吸收系数(a).研究发现,n和k同热处理温度有关.通过光学数据的分析,得到了不同条件下薄膜的间接带隙宽度(Enong),未经过热处理薄膜的Enong是1.715±0.021eV,300K下退火薄膜的Enong是1.643±0.021eV,470K下退火的Enong是1.527±0.021eV.退火温度降低了带隙宽度Enong,但增加了带尾eo这种效应可以根据Mott和Davis提出的多晶体系中态密度来解释.     

Shear Band Formation in Fe–Cr–Mo–V–B–Si Amorphous Alloy under Nanoindentation

The formation of shear bands in Fe–Cr–Mo–V–B–Si amorphous alloy under nanoindentation Is studied. The indentation process is considered against the background of shear band formation in the amorphous material.     

Thermally Tunable Hydrogels Displaying Angle‐Independent Structural Colors

We report the preparation of thermally tunable hydrogels displaying angle‐independent structural colors. The porous structures were formed with short‐range order using colloidal amorphous array templates and a small amount of carbon black (CB). The resultant porous hydrogels prepared using colloidal amorphous arrays without CB appeared white, whereas the hydrogels with CB revealed bright structural colors. The brightly colored hydrogels rapidly changed hues in a reversible manner, and the hues varied widely depending on the water temperature. Moreover, the structural colors were angle‐independent under diffusive lighting because of the isotropic nanostructure generated from the colloidal amorphous arrays.     

A Preloaded Amorphous Calcium Carbonate/Doxorubicin@Silica Nanoreactor for pH‐Responsive Delivery of an Anticancer Drug

Biomedical applications of nontoxic amorphous calcium carbonate (ACC) nanoparticles have mainly been restricted because of their aqueous instability. To improve their stability in physiological environments while retaining their pH‐responsiveness, a novel nanoreactor of ACC–doxorubicin (DOX)@silica was developed for drug delivery for use in cancer therapy. As a result of its rationally engineered structure, this nanoreactor maintains a low drug leakage in physiological and lysosomal/endosomal environments, and responds specifically to pH 6.5 to release the drug. This unique ACC–DOX@silica nanoreactor releases DOX precisely in the weakly acidic microenvironment of cancer cells and results in efficient cell death, thus showing its great potential as a desirable chemotherapeutic nanosystem for cancer therapy.     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。