离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

AAO模板上定向碳纳米棒阵列膜的摩擦学性能

采用两步阳极氧化法在铝基体上制备多孔阳极氧化铝(AAO)模板,然后在其上有序纳米孔中电化学沉积过渡金属Co作为催化剂,通过催化化学气相沉积法(CCVD法)制备出有序、均匀的定向碳纳米棒阵列膜;采用激光Raman光谱仪及场发射扫描电镜(SEM)等方法分析定向碳纳米棒阵列膜的微观结构,     

利用亮度波形证明固态阴极射线发光

制备了3种结构的器件：A: ITO/SiO₂/Alq₃/Al, B: ITO/Alq₃/SiO₂/Al,C: ITO/SiO₂/Alq₃/SiO₂/Al。对于器件A和B,在正向偏压(ITO接正极)下才能观察到发光;而对于器件C,在正向和反向偏压下都可以观察到发光。随着电压升高,器件B和C产生的蓝色发光相对绿光逐渐增强。这主要是由于SiO₂中的加速电子碰撞激发Alq₃发光层产生热电子,并与空穴形成电子空穴对,复合产生蓝光;而对于器件A,在反向偏压下被热电子碰撞激发出的空穴与正向偏压下从Al电极进入的电子复合形成激子,产生绿色发光。这些结构的器件发光不但可来源于电子与积累的空穴复合,而且也来自固态阴极射线发光。     

激波诱导下纳米铝粉与微米铝粉的爆炸特征对比研究

对比研究了入射激波诱导下纳米铝粉和微米铝粉与环氧丙烷混合物快速反应系统中的爆炸特征.利用多台单色谱仪同步采集技术实验测定了二种反应混合物在不同诱导激波中强度作用下的点火延迟时间.为获得爆炸系统内部信息利用扫描电子显微镜(SEM),X射线衍射分析仪(XRD),X射线能谱(XPS)对相应铝粉反应生成物的结构、态貌、表面氧化层厚度进行了表征和分析.结果表明:TEM结果表明纳米铝粉生成物为絮状、针状和纤维状,而微米铝粉生成物为球状且体积增大;XRD结果显示在压缩区、点火区、燃烧区、爆炸区、传播区、碎片压缩致冷区生 关键词： 诱导激波 点火 XPS能谱 铝粉     

Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

The Impact of Foaming Effect on the Physical and Mechanical Properties of Foam Glasses with Molecular-Level Insights

Foaming effect strongly impacts the physical and mechanical properties of foam glass materials, but an understanding of its mechanism especially at the molecular level is still limited. In this study, the foaming effects of dextrin, a mixture of dextrin and carbon, and different carbon allotropes are investigated with respect to surface morphology as well as physical and mechanical properties, in which 1 wt.% carbon black is identified as an optimal choice for a well-balanced material property. More importantly, the different foaming effects are elucidated by all-atomistic molecular dynamics simulations with molecular-level insights into the structure–property relationships. The results show that smaller pores and more uniform pore structure benefit the mechanical properties of the foam glass samples. The foam glass samples show excellent chemical and thermal stability with 1 wt.% carbon as the foaming agent. Furthermore, the foaming effects of CaSO₄ and Na₂HPO₄ are investigated, which both create more uniform pore structures. This work may inspire more systematic approaches to control foaming effect for customized engineering needs by establishing molecular-level structure–property–process relationships, thereby, leading to efficient production of foam glass materials with desired foaming effects.     

Affinity foam fractionation of Trichoderma cellulase

Cellulase could not be selectively collected from fermentation broth by simple foam fractionation, because of the presence of other more surface-active compounds. A new approach of affinity foam fractionation was investigated for improvement. A hardwood hydrolysate (containing cellulose oligomers, substrates to cellulase) and two substrate analogs, i.e., carboxymethyl cellulose (CMC) and xylan hydrolysate, were added before the foaming process. The substrates and substrate analogs were indeed found to bind the cellulase selectively and form more hydrophobic complexes that partition more readily onto bubble surfaces. In this study, the effects of the type and concentration of substrate/analog as well as the presence of cells at different growth stages were examined. The foam fractionation properties evaluated included foaming speed, foam stability, foamate volume, and enrichment of filter paper unit (FPU) and individual cellulase components (i.e., endoglucanases, exoglucanases, and β-glucosidases). Depending on the broth and substrate/analog employed, the foamate FPU could be more than fourfold higher than the starting broth FPU. Addition of substrate/analog also deterred the enrichment of other extracellular proteins, resulting in the desired cellulase purification in the foamate. The value of E/P (enzyme activity-FPU/g/L of proteins) in the foamate reached as high as 18, from a lactose-based fermentation broth with original E/P of 5.6. Among cellulase components, exoglucanases were enriched the most and β-glucosidases the least. The study with CMC of different molecular weights (MW) and degrees of substitution (DS) indicated that the CMC with low DS and high MW performed better in cellulase foam fractionation.     

3,5-Bis(2-hydroxyphenyl)-1<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazole based ligands — protonation and metal complex formation

3,5-Bis(2-hydroxyphenyl)-1H-1,2,4-triazole (H₂L^a) and 4-[3,5-bis(2-hydroxyphenyl)-1H-1,2,4-triazol-1-yl]benzoic acid (H₃L^b) have been prepared, and crystal structure of the intermediate 2-(2-hydroxyphenyl)-4H-1,3-benzoxazin-4-one has been determined. Temperature dependent ¹H NMR spectroscopic measurements of H₂L^a indicated dynamic behavior with the equilibrium between the two asymmetric tautomers. For H₃L^b, pD-dependent ¹H NMR spectroscopic measurements showed small but characteristic shifts in the range of 0 ≤ pD ≤ 1, indicative of a triazole nitrogen atom protonation; the corresponding pK _a of 0.98 ± 0.04 was determined by spectrophotometric titrations. (H₂O, 26°C, 1 M KCl/HCl). Formation of [Fe^III(L^a)]⁺ (pH 2.5) and [Fe^III(L^a)₂]⁻ (pH > 6) was verified by UV-Vis spectroscopy. Complex formation of H₃L^b with Al³⁺ and VO²⁺ was investigated by ¹H NMR spectroscopic titration and cyclic voltammetry, respectively. Single crystals of the phenoxo bridged [V^VO(HL^b)(EtO)]₂·2EtOH were characterized by X-ray structural analysis. Dedicated to Professor Milan Melník on the occasion of his 70th birthday     

基于波动模态耦合的铝电解槽磁流体稳定性傅立叶级数法分析

铝电解槽内磁流体稳定性对铝电解生产有重要影响。本文结合铝电解槽实体仿真的电磁场计算结果,应用傅立叶级数法对槽内磁流体波动稳定性进行数值计算,并对波动的模态耦合问题进行了重点分析。在此基础上,本文以某320kA铝电解槽为研究载体分析了槽长宽比设计对磁流体稳定性的影响,结果表明:波动的不稳定分量集中分布在频谱图中重力波模态密集的低频区域;不考虑母线对体系的影响,增大槽的长宽比,有利于提高磁流体的稳定性。