Immobilization of cellulase using polyurethane foam

Cellulase was covalently immobilized using a hydrophilic polyurethane foam (Hypol®FHP 2002). Compared to the free enzyme, immobilized cellulase showed a dramatic decrease (7.5-fold) in the Michaelis constant for carboxymethylcellulose. The immobilized enzyme also had a broader and more basic pH optimum (pH 5.5–6.0), a greater stability under heat-denaturing or liquid nitrogen-freezing conditions, and was relatively more efficient in utilizing insoluble cellulose substrates. High molecular weight compounds (Blue Dextran) could move throughout the foam matrix, indicating permeability to insoluble celluloses; activity could be further improved 2.4-fold after powdering, foams under liquid nitrogen. The improved kinetic and stability features of the immobilized cellulase combined with advantageous properties of the polyurethane foam (resistance to enzymatic degradation, plasticity of shape and size) suggest that this mechanism of cellulase immobilization has high potential for application in the industrial degradation of celluloses.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Surface modification of highly dispersed rubber fillers and pigments by titanate proadhesive and hydrophobic compounds

A method of modifying silicate and carbonate fillers with titanate coupling agents and proadhesive agents was worked out. The modification aimed at hydrophobization of filler surface by introduction to the surface of functional groups with chemical affinity to polymers. Optimum amounts of modifying substances and appropriate conditions for performing the modification process were established. The obtained fillers showed a high degree of hydrophobicity.The modified fillers were applied in rubber mixtures based on butadienestyrene or natural rubber, in polyurethanes, in PVC, and as pigments in oil dyes of high corossive resistance.     

Sunlight-activated AlFeO3/TiO2 photocatalyst

A nanocomposite photocatalyst composed of AlFeO₃ and TiO₂ is prepared, and characterized through X-ray diffraction. Application of the nanocomposite for the photodegradations of eosin dye and methyl orange gives an improved photoactivity compared with TiO₂-only nanomaterials. The optimal concentration of AlFeO₃ in the composite is about 1.0 wt% under UV excitation, and 9.0 wt% under sunlight excitation for the improved photoactivity. Furthermore, this nanocomposite is more active for eosin photodegradation if natural sunlight rather than UV is used. This may be due to the reason that adding AlFeO₃ nanoparticles into TiO₂ matrix can promote the separation of photogener-ated charge carriers, and extend the photoresponse of TiO₂ toward visible region, which results in an increase in the solar energy utilization efficiency.     

Phase transformations during electrochemical incorporation of lithium in intermetallic compounds of aluminum

Comparative study of the regularities of the reaction and specific features of phase formation during electrochemical incorporation of lithium from propylene carbonate solutions in intermetallic aluminum-based compounds (CuAl₂, Mg₂Al₃, and NiAl) and pure metals (Al, Cu, Mg, and Ni) was performed. The initial stage of the process was shown to be dissolution of lithium in the solid phase limited by diffusion for all studied substrates. Trace amounts of lithium-containing by-products, were detected in NiAl, Ni, and Cu samples. The subsequent change in the limiting stage is related to the beginning of formation of a new phase: metallic lithium (on Mg₂Al₃, NiAl, Mg, Ni, and Cu) or LiAl (on Al and CuAl₂ cathodes). In the latter case, the solid-phase substitution occurs, which is formally described by the equation: CuAl₂+2Li⁺+2e→2LiAl+Cu. Thus, the specific features of phase formation on the CuAl₂ electrode correspond to the highest (among three intermetallides studied) concentration of Al atoms in the crystal lattice of the compound. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8. pp. 1525–1530, August, 1998.     

Ultra‐wideline 27Al NMR Investigation of Three‐ and Five‐Coordinate Aluminum Environments

Ultra‐wideline ²⁷Al NMR experiments are conducted on coordination compounds with ²⁷Al nuclei possessing immense quadrupolar interactions that result from exceptionally nonspherical coordination environments. NMR spectra are acquired using a methodology involving frequency‐stepped, piecewise acquisition of NMR spectra with Hahn‐echo or quadrupolar Carr–Purcell Meiboom–Gill (QCPMG) pulse sequences, which is applicable to any half‐integer quadrupolar nucleus with extremely broad NMR powder patterns. Despite the large breadth of these central transition powder patterns, ranging from 250 to 700 kHz, the total experimental times are an order of magnitude less than previously reported experiments on analogous complexes with smaller quadrupolar interactions. The complexes examined feature three‐ or five‐coordinate aluminum sites: trismesitylaluminum (AlMes₃), tris(bis(trimethylsilyl)amino)aluminum (Al(NTMS₂)₃), bis[dimethyl tetrahydrofurfuryloxide aluminum] ([Me₂‐Al(μ‐OTHF)]₂), and bis[diethyl tetrahydrofurfuryloxide aluminum] ([Et₂‐Al(μ‐OTHF)]₂). We report some of the largest ²⁷Al quadrupolar coupling constants measured to date, with values of C_Q(²⁷Al) of 48.2(1), 36.3(1), 19.9(1), and 19.6(2) MHz for AlMes₃ , Al(NTMS₂)₃ , [Me₂‐Al(μ‐OTHF)]₂ , and [Et₂‐Al(μ‐OTHF)]₂ , respectively. X‐ray crystallographic data and theoretical (Hartree–Fock and DFT) calculations of ²⁷Al electric field gradient (EFG) tensors are utilized to examine the relationships between the quadrupolar interactions and molecular structure; in particular, the origin of the immense quadrupolar interaction in the three‐coordinate species is studied via analyses of molecular orbitals.     

First principle calculations study of AlN surface terminal structure evolution under different conditions

The surface structure and properties of aluminum nitride (AlN) play an important role in many applications. Using the first principle calculations method, we analyzed the surface terminal structure of AlN and its evolution under different conditions by determining the surface energy, adsorption energy, and evaporation energy of the Al and N terminals on the AlN(0001) surface. Our results show that the reason why the N terminal is less stable than the Al terminal is not only because of its high surface energy but also because its adsorption performance is extremely sensitive to the adsorption position. The surface N atoms combine to form N₂ molecules that escape during the evaporation process at high temperature. After surface N atoms escape, the AlN surface structure reconstitutes to form a hexagonal closest packing (HCP)–like structure, and the energy barrier for the reconstructing process is 3.2 eV. This shows that the structure and form of the AlN(0001) terminals depend on the environmental conditions.     

一种纳米TiO2粉体防团聚的新方法

开发了一种新的低成本防团聚方法——泡沫悬浮法。对泡沫悬浮法和共沸蒸馏法的防团聚效果进行了系统比较。结果表明，泡沫悬浮法可以有效抑制煅烧过程中纳米TiO₂晶粒的粗化和一次粒径的长大。泡沫悬浮法所得纳米TiO₂的粉体还具有团聚粒径小、粒度分布窄以及比表面积大的优点。通过FTIR、TG、DTA和松装密度实验对泡沫悬浮法的防团聚机理进行了研究，提出了纳米TiO₂防团聚模型。     

Thermal characteristics of polyurethane foams incorporated with phase change materials

Thermal energy storage plays an important role in heat management because of the demand for developed energy conservation, and has applications in diverse areas, from building heating/cooling systems which enable solar energy incorporation into the structure, to textiles and clothings providing an enhanced thermal comfort. In this study, we aimed to improve thermal characteristics of polyurethane rigid foams that have been widely used for thermal insulation as the ultimate energy savers due to their ability to form sandwich structures with various facer materials. Through a laboratory-scale work, two paraffin waxes acting as phase change materials, namely n-hexadecane and n-octadecane, each of which is capable of managing large heat storage/release, were directly incorporated into the polyurethane foams at different ratios. Polymerization modified by means of n-alkane addition could be achieved without any adverse effect. In order to determine both structural and thermal characteristics, seven types of foams produced were examined by FT-IR, SEM, DSC analyses, calorimeter bomb and mechanical tests. Results show that polyurethane foams can be designed as thermal insulators equipped with an improved buffering function against temperature changes.