昆虫拍翼方式的非定常流动物理再探讨

基于提出的理论模化方法来探讨昆虫拍翼方式的非定常流动物理. 以悬停飞行为 例,通过对拍翼运动的分析,不仅解释了昆虫利用高频拍翼的方式为何能够克服低雷诺数带 来的气动局限性(St \gg 1/Re),而且还指出高升力产生和调节的3个流动 控制因素：(1) 由于拍翼的变速运动即时引起了流体动力响应,这种附加惯性效应 可产生瞬时的高升力; (2) 保持前缘涡不脱离翼面有助于减少升力的下降; (3) 增大后缘涡的强度并加速其脱离后缘能够有效地提高升力.     

Unsteady boundary layers with small cross flows

Despite the intensive development of computer technology and methods of solving the Navier-Stokes and Reynolds equations, the unsteady problems of the three-dimensional boundary layer are of significant interest in aerodynamics. So far these problems have been little studied as a result of objective difficulties related with the large dimensionality of the system of equations and the complexity of its investigation [{xc1}]. Therefore, analytic results in this field are important. In the present study the unsteady three-dimensional boundary layer equations are investigated in the case of small cross flows using the perturbation method. An intermediate system of equations, which includes the basic three-dimensional effects but is significantly simpler than the initial system is derived. The features of the formulation considered are studied in relation to the important practical problems of boundary layer flow past slender wings and weakly asymmetric bodies at small angles of attack.     

CHAOTIC MOTIONS AND LIMIT CYCLE FLUTTER OF TWO-DIMENSIONAL WING IN SUPERSONIC FLOW

Based on the piston theory of supersonic flow and the energy method, the flutter motion equations of a two-dimensional wing with cubic stiffness in the pitching direction are established. The aeroelastic system contains both structural and aerodynamic nonlinearities. Hopf bifurcation theory is used to analyze the flutter speed of the system. The effects of system parameters on the flutter speed are studied. The 4th order Runge-Kutta method is used to calculate the stable limit cycle responses and chaotic motions of the aeroelastic system. Results show that the number and the stability of equilibrium points of the system vary with the increase of flow speed. Besides the simple limit cycle response of period 1, there are also period-doubling responses and chaotic motions in the flutter system. The route leading to chaos in the aeroelastic model used here is the period-doubling bifurcation. The chaotic motions in the system occur only when the flow speed is higher than the linear divergent speed and the initial condition is very small. Moreover, the flow speed regions in which the system behaves chaos axe very narrow.     

??????????????????????????о?

介绍了燃气作动筒气动模拟加载装置设计思路和原理,并阐述了利用斜面上升法进 行模拟加载装置设计的计算方法. 实践应用表明气动模拟加载装置方案基本能够真实、等效 的模拟弹翼气动载荷,利用该装置大大地缩短研制周期、节省研制经费,可以进行推广应用.     

联邦滤波在飞机组合导航中的应用

研究了中等精度捷联惯导系统(SINS),大气数据系统(ADS)和塔康系统(TACAN)构成的机载组合导航系统.在分析SINS、ADS、TACAN各自特点的基础上,提出了SISN/ADS/TACAN组合导航系统的联邦滤波方案,并建立了相应的组合导航系统的数学模型.以一条典型的飞行轨迹进行了全航线的仿真研究,仿真结果为:基于联邦滤波的SINS/ADS/TACAN组合导航系统的位置精度约为70 m(CEP),速度精度约为0.75 m/s(1),航向精度为约为 (1)和姿态精度约为 (1),由此可见基于联邦滤波的SINS/ADS/TACAN组合导航系统可以充分利用各机载导航子系统信息,满足飞机导航定位的精度要求.     

N-S方程数值研究翼型对微型扑翼气动特性的影响

首先基于嵌套网格发展了一套适用于三维扑翼研究的非定常雷诺平均Navier-Stokes(RANS)方程数值模拟方法.为了解决微型扑翼在低马赫数下的收敛问题,使用了预处理方法,湍流模型为BL模型.在该方法的基础上,保持状态参数和扑翼表面形状一定的情况下,分别研究了一系列不同厚度、不同弯度的翼型对于微型扑翼气动特性的影响....     

机翼全尺寸延寿试验及可靠性分析

机翼全尺寸疲劳试验是老龄飞机延寿的科学依据。本文介绍了疲劳裂纹形成和扩展寿命的分散系数，以及可靠度和标准差的选取。针对延寿的可靠性分析，提出按疲劳／损伤容限设计概念或当量裂纹扩展寿命方法，以及机翼串联模型，确定整机延寿使用寿命的技术途径。最后给出应用实例。     

75°前缘后掠角细长三角翼失速特性实验研究

本文简介了前缘后掠角为７５°的平板三角翼在西北工业大学ＮＦ－３低速风洞中的测力和相关的激光片光流动显示实验，给出了部分实验结果，并与文献［１－３］的结果进行了比较，虽然各种来源的结果存在着明显的差异，但ＮＦ－３风洞两种测试手段的实验结果却具有良好的相关性。     

翼型、机翼非定常运动模式下动态数值模拟

基于RANS方程,通过刚性动网格技术实现对翼型和机翼典型运动模式的描述,采用双时间推进方法和Roe空间离散格式对流场求解,构建了一个非定常气动计算平台;以NACA0012翼型为算倒进行了动态数值模拟可信度验证。数值模拟结果与试验数据吻合较好,升力和俯仰力矩的最大计算误差分别为3％和10％,表明了该平台的可靠性。另外,还数值模拟了M6机翼的动态非定常流场,并分析了两种湍流模型对非定常流场激波的捕捉能力。结果表明非定常流动中S-A湍流模型对激波的捕捉较B-L模型更敏感。文中开发的非定常计算平台对进一步解决三维复杂流场的流动问题有很高的工程应用价值。     

抗阵风载荷的小型无人飞行器设计及相关风洞舵效比较

本文目的在于探索验证微小型飞行器的气动布局与抗突风载荷能力的关系,结合风洞试验验证了结果并进行了数据分析。在低雷诺数条件下采用大边条、小展弦比非常规的气动布局设计,根据性能指标要求对飞行器的机翼面积、翼展、翼型等相关参数进行了分析设计;运用数值模拟等手段对全机简化模型进行了气动力计算,对结果进了行初步的定性分析,为初始的设计提供了验证;结合实际的靶机制作得到了实际飞机的风洞验证缩比模型,对其进行了风洞的常规测力实验。根据风洞试验结果对飞机升降舵舵面与副翼舵面偏转0°、±15°、±30°的气动性能进行了评估,为进一步的理论分析提供依据。结合实际外场飞行实验情况得出飞行器的实际气动性能,并对大量相关风洞试验数据进行了分析;探索性地给出了一条适用于微小型飞行器进行的新设计方法和设计流程,为设计适应于阵风载荷等恶劣气候条件下微小的型飞行器提供了参考新思路。