Dissipation, decoherence and preparation effects in the spin-boson system

The dynamics of the reduced density matrix of the driven dissipative two-state system is studied for a general diagonal/off-diagonal initial state. We derive exact formal series expressions for the populations and coherences and show that they can be cast into the form of coupled nonconvolutive exact master equations and integral relations. We show that neither the asymptotic distributions, nor the transition temperature between coherent and incoherent motion, nor the dephasing rate and relaxation rate towards the equilibrium state depend on the particular initial state chosen. However, in the underdamped regime, effects of the particular initial preparation, e.g. in an off-diagonal state of the density matrix, strongly affect the transient dynamics. We find that an appropriately tuned external ac-field can slow down decoherence and thus allow preparation effects to persist for longer times than in the absence of driving. Received 23 October 1998 and Received in final form 26 February 1999     

Efficient 1047 nm CW laser emission of Nd:YLF under direct pumping into the emitting level

We demonstrate a 1047 nm Nd:LiYF₄ (Nd:YLF) laser by directly pumping into the upper lasing level with a tunable Ti:Sapphire laser. The results obtained for direct upper laser level pumping at 863, 872 and 880 nm of Nd:YLF were compared with traditional 806 nm pump band excitation. Highly efficient 1047 nm continuous-wave (CW) laser emission under direct pumping at 880 nm in an 8 mm thick, 1.0 at.% Nd:YLF crystal is obtained. The slope efficiency is improved from 55.6% for traditional pumping at 806 nm to 76.3% for direct pumping at 880 nm.     

A standing wave model for acoustic pumping effect in microchannels

An acoustic impedance pump is comprised of a compressible section coupled at both ends to sections of different acoustic impedances. Liquid can be pumped from one end to another if the compressible section is actuated at certain locations. This paper presents an analytical model on the acoustic pumping effect in microchannels. A one-dimensional wave equation is developed for acoustic pressures in the compressible section, taking into account the actuations as acoustic source terms. The solution for the acoustic pressure is a set of standing waves established inside the compressible section, corresponding to the actuations. The pumping effect is attributed to the second-order terms of the acoustic pressures. Two control parameters are identified. One is the resonance frequency associated with the sound wave speed and length of the compressible section, and the other is the damping factor. The analytical results are compared with the experimental data, and a qualitative agreement is observed in terms of frequency characteristics of the pumping pressure.     

An integrated plastic microchip for enhancing electrophoretic separation using tunable pressure-driven backflows

Microfluidic CE (MCE) is an effective solution for rapid and sensitive determination of multiple analytes. Herein, a dynamic coated cyclic olefin copolymer microchip was developed having an on-chip micropump for fluid velocity adjusting in electrophoretic separations. This micropump was fabricated by constructing a polyacrylamide gel membrane at one channel terminal. Once applying electric field across the membrane, a pressure-driven flow generated automatically to balance the electroosmotic flow (EOF) mismatch at the channel-membrane interface. The influence of gel precursor concentration and operating voltages on the fluid velocity was carefully evaluated. Moreover, the highly integration of injection, separation, and pumping units of the MCE system minimized the dead volume and provides satisfied column efficiency. Experiments showed that by adjusting of pumping voltage reduced the fluid velocity by a factor of 6, resulting six- and threefold resolving power enhancements of rhodamine dye mixture and amino acid mixture, respectively. Furthermore, the developed MCE method was applied for rhodamines and amino acids quantitation in food and cosmetics, with standard addition recoveries of 87.3–106.9% and 89.9–117.4%, respectively. These results were also confirmed by standard HPLC method, revealing the application potential in fast and onsite analysis of complex samples.     

Redox- and protonation-state driven substrate-protein dynamics in respiratory complex I

Respiratory complex I is a key enzyme in the electron transport chains of mitochondria and bacteria. It transfers two electrons to quinone and couples this redox reaction to proton pumping to electrically charge the membrane it is embedded in. The charge and pH gradient across the membrane drives the synthesis of ATP. The redox reaction and proton pumping in complex I are separated in space and time, which raises the question of how the two reactions are coupled so efficiently. Here, we focus on the unique ～35 Å long tunnel of complex I, which houses the binding site of quinone reduction. We discuss the redox and protonation reactions that occur in this tunnel and how they influence the dynamics of protein and substrate. On the basis of recent structural data and results from molecular simulations, we review how quinone reduction and dynamics may be coupled to proton pumping in complex I.     

光磁共振实验反常共振信号的判断与原因分析

对光磁共振实验中各反常共振信号对应的射频信号进行了研究,提出了反常共振信号的判断方法.利用傅立叶级数展开,对反常射频信号各谐波分量的强度进行了定量分析.结果表明,反常共振信号是由射频信号中的谐波所引起,而非多量子跃迁的结果.     

不同排布方向性椭圆孔液体润滑机械密封性能的研究

为提高液体润滑多孔端面密封的动压性能,提出了方向性多孔端面机械密封.考虑端面间润滑液膜的空化现象,基于质量守恒的JFO空化边界条件建立了理论模型,采用有限差分法求解Reynolds控制方程,获得了端面膜压分布,从而对比分析了方向性椭圆孔的排布方式对多孔端面机械密封性能的影响规律.结果表明:椭圆孔的方向性排布对端面密封的密封性能影响较大,高压侧下游泵送孔可有效提升密封端面的流体动压特性,上游泵送孔不论在高压侧还是在低压侧均可有效降低密封泄漏率;当形状因子γ为3~5,内外孔倾斜角α为35°~45°和β为125°~135°时,可获得最佳的动压性能,当形状因子γ为3~5,倾斜角α为30°~50°和β为30°~50°时,可以获得最低泄漏率.     

Increasing the pump-up rate to polarize He gas using spin-exchange optical pumping method

In recent years, polarized ³He gas has increasingly been used as neutron polarizers and polarization analyzers. Two of the leading methods to polarize the ³He gas are the spin-exchange optical pumping (SEOP) method and the meta-stable exchange optical pumping (MEOP) method. At present, the SEOP setup is comparatively compact due to the fact that it does not require the sophisticated compressor system used in the MEOP method. The temperature and the laser power available determine the speed, at which the SEOP method polarizes the ³He gas. For the quantity of gas typically used in neutron scattering work, this speed is independent of the quantity of the gas required, whereas the polarizing time using the MEOP method is proportional to the quantity of gas required. Currently, using the SEOP method to polarize several bar-liters of ³He to 70% polarization would require 20−40 h. This is an order of magnitude longer than the MEOP method for the same quantity of gas and polarization. It would therefore be advantageous to speed up the SEOP process. In this article, we analyze the requirements for temperature, laser power, and the type of alkali used in order to shorten the time required to polarize ³He gas using the SEOP method.     

微极流体蠕动泵经由滑移边界管道输送的Stokes流动

计及管道边界条件滑移的影响,研究微极流体蠕动泵,经由圆柱形管道输运的Stokes流动.壁面运动的控制方程为正弦波方程.使用润滑理论,得到了轴向速度、微转动向量、流函数、压力梯度、摩擦力和机械效率的解析数值解.用图形表示出构成参数,如像耦合参数、微极参数和表征蠕流泵特性的滑移参数、摩擦力和俘获现象的影响.数值计算表明,当耦合参数较大时,需要蠕动泵的压力更大,而微极参数和滑移参数正相反.俘获团块的大小随耦合参数和微极参数的减小而缩小,而随滑移参数的增大而缩小.