适用于测量大气气溶胶吸收系数的光声光谱系统的研究

外部噪声和环境温湿度变化对光声池性能的影响是光声光谱技术在实际大气气溶胶吸收测量应用中遇到的主要问题。详细分析了环境温湿度变化引起的共振频率漂移对光声信号的影响,提出了抑制流动噪声和采样泵振动噪声的方法,研制完成了一套测量大气气溶胶吸收的光声光谱系统,探测极限为1.4×10-8 W·cm-1·Hz-1/2。利用NO₂气体在532 nm的吸收对光声池进行了标定,并对实际大气气溶胶的吸收特性进行了测量,结果表明光声光谱测量系统可以满足自然悬浮状态下的气溶胶吸收系数的实时测量。     

Thermodynamic-Controlled Gas Phase Process for the Synthesis of Nickel Nanoparticles of Adjustable Size and Morphology

Gas phase processes are a successful route for the synthesis of nano materials. Nickel particles are used in applications ranging from catalysis to nano electronics and energy storage. The application field defines the required particle size, morphology, crystallinity and purity. Nickel tetracarbonyl is the most promising precursor for the synthesis of high purity nickel particles. Due to the toxicity of this precursor and to obtain an optimal process control we developed a two-step flow type process. Nickel carbonyl and nickel particles are synthesized in a sequence of reactions. The particles are formed in a hot wall reactor at temperatures below 400°C in different gas compositions. Varying the process conditions enables the adjustment of the particle size in a range from 3 to 140 nm. The controllable crystalline habits are polycrystalline, single crystals or multiple twinned particles (MTP). Spectroscopic investigations show an excellent purity. We report about the process and first investigations of the properties of the synthesized nickel nanomaterial.     

Submicrometre particle size distribution from 0.1–0.45 μm in the urban plume of the city of Valladolid

Summary Particle size distribution in the urban plume of the city of Valladolid was measured with a laser spectrometer during a one-month sampling campaign carried out over the winter period. Experimental results of the number of particles covering the 0.10–0.12, 0.12–0.15, 0.15–0.20, 0.20–0.25, 0.25–0.35 and 0.35–0.45 μm ranges are presented. Using spectral analysis as a statistical technique, two 12 h and 24 h significant peaks are obtained for each size range. In order to interpret the meaning of both peaks, the hourly particle size, traffic and nitrogen oxide patterns are compared. The contribution of domestic heating, traffic exhaust emissions and the strong influence of the gas-to-particle conversion processes mainly within the 0.10–0.15 μm range, may be inferred.     

Measurement of carbonaceous aerosols: validation of a thermal gravimetric method and its comparison with a thermal optical transmittance method

A high throughput thermal gravimetric method was developed to measure the carbonaceous aerosols and particulates collected on filters. Representative portions or the whole piece of a loaded or blank filter was sampled and conditioned at 105±5 °C for 4 h to drive away water moisture. The sample was then treated at 550±10 °C for 4 h. After each of the heat treatment steps, the sample was conditioned in a humidity and temperature-controlled cabinet for 12 h till constant weight. The weight of the filter before and after the heated treatment was measured and the weight difference between the treatment at 550 and 105 °C was calculated as the weight of the carbon containing substances (CCS). Reference chemical standards and certified reference materials SRM 1649a and 1650a were used to validate the method. CCS concentrations of real aerosol samples collected in the city of Hong Kong during the summer of 2001 were also measured, compared and correlated with the concentrations of total carbon (TC), elemental carbon (EC) and organic carbon (OC) of the samples determined using a thermal optical transmittance (TOT) method as specified in NIOSH method 5040. The weight of organic compounds in airborne particulate matters is usually estimated by multiplying the weight of TC, which is determined by thermal/thermal optical methods, by a factor of 1.2 or 1.4. To this end, a correction factor of approximately 1.6 was found to relate TC to the measured values of CCS in aerosol samples collected in the urban atmosphere of Hong Kong. The proposed procedure for measurement of CCS is simple, easy to follow and requires simple laboratory instrumentation. Typically, the analysis of more than 100 filter samples can be completed within three working days with minimal attention.     

Metal fractionation of atmospheric aerosols via sequential chemical extraction: a review

This review surveys schemes used to sequentially chemically fractionate metals and metalloids present in airborne particulate matter. It focuses mainly on sequential chemical fractionation schemes published over the last 15 years. These schemes have been classified into five main categories: (1) based on Tessiers procedure, (2) based on Chesters procedure, (3) based on Zatkas procedure, (4) based on BCR procedure, and (5) other procedures. The operational characteristics as well as the state of the art in metal fractionation of airborne particulate matter, fly ashes and workroom aerosols, in terms of applications, optimizations and innovations, are also described. Many references to other works in this area are provided.     

Analysis of α‐acyloxyhydroperoxy aldehydes with electrospray ionization–tandem mass spectrometry (ESI‐MSn)

A series of α‐acyloxyhydroperoxy aldehydes was analyzed with direct infusion electrospray ionization tandem mass spectrometry (ESI/MSⁿ) as well as liquid chromatography coupled with the mass spectrometry (LC/MS). Standards of α‐acyloxyhydroperoxy aldehydes were prepared by liquid‐phase ozonolysis of cyclohexene in the presence of carboxylic acids. Stabilized Criegee intermediate (SCI), a by‐product of the ozone attack on the cyclohexene double bond, reacted with the selected carboxylic acids (SCI scavengers) leading to the formation of α‐acyloxyhydroperoxy aldehydes. Ionization conditions were optimized. [M + H]⁺ ions were not formed in ESI; consequently, α‐acyloxyhydroperoxy aldehydes were identified as their ammonia adducts for the first time. On the other hand, atmospheric‐pressure chemical ionization has led to decomposition of the compounds of interest. Analysis of the mass spectra (MS² and MS³) of the [M + NH₄]⁺ ions allowed recognizing the fragmentation pathways, common for all of the compounds under study. In order to get detailed insights into the fragmentation mechanism, a number of isotopically labeled analogs were also studied. To confirm that the fragmentation mechanism allows predicting the mass spectrum of different α‐acyloxyhydroperoxy aldehydes, ozonolysis of α‐pinene, a very important secondary organic aerosol precursor, was carried out. Spectra of the two ammonium cationized α‐acyloxyhydroperoxy aldehydes prepared with α‐pinene, cis‐pinonic acid as well as pinic acid were predicted very accurately. Possible applications of the method developed for the analysis of α‐acyloxyhydroperoxy aldehydes in SOA samples, as well as other compounds containing hydroperoxide moiety are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Water contact angles on charged surfaces in aerosols

Interactions between water and solid substrates are of fundamental importance to various processes in nature and industry. Electric control is widely used to modify interfacial water, where the influence of surface charges is inevitable. Here we obtain positively and negatively charged surfaces using LiTaO₃ crystals and observe that a large net surface charge up to 0.1 C/m² can nominally change the contact angles of pure water droplets comparing to the same uncharged surface. However, even a small amount of surface charge can efficiently increase the water contact angle in the presence of aerosols. Our results indicate that such surface charges can hardly affect the structure of interfacial water molecular layers and the morphology of the macroscopic droplet, while adsorption of a small amount of organic contaminants from aerosols with the help of Coulomb attraction can notably decrease the wettability of solid surface. Our results not only provide a fundamental understanding of the interactions between charged surfaces and water, but also help to develop new techniques on electric control of wettability and microfluidics in real aerosol environments.     

Statistical evaluation of non‐profile analyses for the in vitro bioequivalence

For locally acting drug products such as nasal aerosols and nasal sprays, the 2003 US Food and Drug Administration (FDA) draft guidance suggests that bioequivalence between generic and brand‐name products be established through in vitro tests. In addition, for non‐profile analyses based on spray content uniformity, droplet size distribution, spray pattern, priming, and re‐priming, the draft US FDA guidance recommends that the population bioequivalence (PBE) between generic and innovator's products be demonstrated. However, the linearized criterion recommended in the draft FDA guidance does not take into consideration the variations due to batches, samples, and life stages. Hence, under a two‐stage nested random effects model, we apply the methods of modified large‐sample (MLS) and generalized pivotal quantities (GPQs) to construct the upper 95% confidence limit for in vitro PBE criterion with consideration of variance components as the statistical testing procedures for establishing the in vitro BE. A simulation study was conducted to compare empirical size and empirical power among the three methods. A numerical example illustrates the proposed methods. Copyright © 2010 John Wiley & Sons, Ltd.     

On the use of the Knudsen number and aerosol Knudsen number in the kinetics of Brownian coagulation of aerosols

We consider, on the basis of dimensional analysis, the use of the Knudsen number and aerosol Knudsen number in the kinetics of Brownian coagulation of aerosols. The aerosol Knudsen numberKn _p emerges naturally when one assumes that the aerosol particle motion can be described in terms of Brownian motion. Examples of dimensionless coagulation constants consistent with the use ofKn _p are also discussed.