Repleteness and regular lattice measures

Let X be an abstract set and L a lattice of subsets of X. To each lattice regular measure µ, we associate two induced measures and on suitable lattices of the Wallman space IR(L) and another measure µ on the spaceIR(L). We will investigate the reflection of smoothness properties of p onto , and µ; and try to set some new criterion for repleteness and measure repleteness.     

新型汽车发动机油用添加剂的研究进展

本文介绍了汽车发动机油用添加剂尤其是多功能添加剂的发展概况、作用机理、种类、结构及应用效果，并对未来润滑油添加剂的发展方向提供了一些参考，为我国润滑油品的高档化发展提出了几点想法。     

Influence of plasticizers and crosslinking on the properties of biodegradable films made from sodium caseinate

Plasticized protein films were prepared by the casting method from water solution of sodium caseinate and plasticizers with the aim to obtain environmentally friendly materials for packaging applications. Mechanical properties (tensile strength, elongation and Young’s modulus) of caseinate based films were determined versus ratio of protein to plasticizer, plasticizer type and relative humidity conditions. Among the different polyol-type plasticizers tested, glycerol (Gly) and triethanolamine (TEA) were the most efficient for the improvement of mechanical properties (high strains for low stresses). Further, chemical crosslinking between formaldehyde (HCHO) and free amino groups (ε-NH₂) of sodium caseinate was performed to increase water resistance of TEA plasticized films. Optimal mechanical properties, i.e. elastic modulus of 105 MPa, tensile strength of 8-9 MPa for elongation at break about 110-125% were obtained for HCHO/ε-NH₂ ratios higher than 1.35. Protein specific water solubility was determined from a 280 nm absorbance. For convenient crosslinker (HCHO) content sodium caseinate solubility can be lowered to less than 5 wt% after 24 h immersion in water.     

Factors Contributing to Solubility Synergism of Some Basic Drugs with β-Cyclodextrin in Ternary Molecular Complexes

Ternary complexes exploiting solubility synergism (SSn) between basic drugs and β-cyclodextrin (β-CD) in the presence of an organic hydoxy acid have been reported to provide the pharmaceutical technology with highly soluble ternary complexes, even with the least soluble β-CD. In this work, phase solubility techniques were used to study factors affecting SSn in aqueous solution, which may help in understanding the mechanism involved in ternary complex formation in solution, under equilibrium conditions. The equilibrium solubility of both β-CD and each of 8 structurally unrelated drugs were measured in tandem in the presence of different acid types at low and high pHs, and at different time intervals over a period of 1–40 days. The results indicate that SSn is evident regardless of acid type (organic and inorganic) at low pH, but the extent of SSn is acid type dependant and is limited by the drug salt solubility product constant (pK _sp). Among different drugs, no apparent trend exists between drug salt solubility and the extent of SSn, but lowering drug salt solubility by increasing pH depresses SSn. The results also reveal no apparent trend between the magnitude of the complex formation constant (K _ij) and SSn. For example, drugs of low K _ij values such as astemizole, cisapride and sildenafil do not show any SSn, yet ketotifen and pizotifen, which also have low K _ij values, exhibit substantial SSn. However, the solublizing power of β-CD represented by the slope of phase solubility diagram can be used as a marker for SSn (slopes exceeding 0.4 induce SSn).     

Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.     

Conversion of phosphogypsum to potassium sulfate

Summary Solubility of calcium sulfate in concentrated aqueous chloride solutions is of particular significance in chloride hydrometallurgy and various crystallization processes, such as the production of potassium sulfate from phosphogypsum and potassium chloride. This paper examines an example of the second type of application in which gypsum and potassium chloride are reacted to form K₂SO₄. The solubility of phosphogypsum in aqueous solutions of KCl, HCl, and mixtures of both has first been measured at various temperatures and concentrations. The parameters investigated are HCl concentration up to 6M, KCl concentration up to 180 g L^-1 and temperature from 25 to 80°C. In addition, the influence of co-existing chloride salts, such as (HCl+KCl), on the solubility of calcium sulfate is estimated from 25 to 80°C. The solubility increases obviously with the temperature increment as it does initially with acid concentration, reaching a maximum of about 3M HCl, 130 g L^-1 KCl and then drops. At the same time, the solubility of CaSO₄·2H₂O decreases with increasing KCl concentration.     

Quantitative determination of sodium stearyl fumarate in a tablet formulation from continuous manufacturing using a high-pH reversed-phase HPLC method

This study demonstrates the first use of a reversed-phase (RP) high-performance liquid chromatography method with a high-pH buffer for the analysis of sodium stearyl fumarate (SSF) from a tablet formulation. After examining the retention time and peak shape using various buffer concentrations, buffer pH, and RP stationary phases, an optimized method was established using the XBridge® BEH C18 at high pH. This column was further evaluated for method specificity, accuracy, precision, linearity, stability, and sensitivity. Finally, the method was successfully used as a convenient and robust analytical procedure to accurately quantitate SSF in stratified tablets from a continuous manufacturing process to confirm the excipient uniformity throughout the process.     

Electrospinning of poly(lactic acid): Theoretical approach for the solvent selection to produce defect‐free nanofibers

In this study an integrated methodology was proposed for the selection of solvent systems to produce electrospinnable solutions that form defect‐free poly(lactic acid) (PLA) fibers with narrow diameter distributions. The solvent systems were chosen using a thermodynamic approach, combined with electrical and rheological property criteria. More specifically, the three step methodology includes (1) initial choice of solvent by solubility evaluation to meet thermodynamic criteria, (2) electrical properties, that is, conductivity and dielectric constant adjustment by using solvent mixtures to meet electrical property criteria, and (3) critical entanglement concentration (C_e) determination by viscosity measurements, supported by elastic and plastic moduli measurements, followed by concentration adjustment to meet rheological criteria. All three criteria need to be met to ensure defect‐free nanofiber morphology. The methodology was demonstrated using PLA solutions that were characterized in terms of thermodynamic properties, conductivity, surface tension, and viscosity measurements. These data were analyzed and related to the nanofiber morphology and diameter as determined from scanning electron microscopy (SEM). Measurements of the elastic (G′) and the plastic (G″) moduli of PLA solutions showed a sharp increase of G′ at the chain entanglement concentration. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1483–1498     

Efficient syntheses of zoledronic acid as an active ingredient of a drug against osteoporosis

The reaction of 1H-imidazol-1-ylacetic acid and two equivalents of phosphorus trichloride/phosphorous acid at 75?°C in sulfolane, or in the presence of catalytic amounts of [bmim][BF₄] afforded zoledronic acid in yields up to 75%. The joint use of the ionic liquid additive and sulfolane as the solvent was synergetic affording highly valuable zoledronic acid in a record yield of 93%.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes: Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile (PAN) and an additive of polyvinylpyrrolidone (PVP), which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm² and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.