Theoretical study of structure and stability of fullerene derivative: C50O

A total of eight possible isomers of C₅₀O, an oxide of fullerene C₅₀ (D_5h), have been investigated by B3LYP/3‐21G calculations. The isomer, which has an annulene‐like structure with oxygen bridging across a [5,6] type C? C bond at the site between the pole and the equatorial belt, is found being the ground state of C₅₀O. Four isomers are relatively more stable and the energy differences between them are not large. This result indicates that more than one C₅₀O isomer will coexist once C₅₀O is synthesized. The relative stabilities of the C₅₀O isomers may be determined mainly by the strain release and by the formation of the cyclic phenylene substructure at the equatorial belt of the cage. The calculated nucleus independent chemical shifts (NICS) of the C₅₀O isomers will be useful because from them one can expect outstanding NMR properties that can lead to their identification and characterization. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Mechanism of Reppe's nickel-catalyzed ethyne tetramerization to cyclooctatetraene: a DFT study

In this B3 LYP model study, homoleptic nickel(0) ethyne complexes have been predicted as the catalyst resting state for the title reaction. Ethyne ligand coupling of Ni(C(2)H(2))(3) yields monoethyne nickelacyclopentadiene in the rate-determining step. Ethyne coordination is followed by insertion of an ethyne ligand into the Ni--C sigma bond. A highly strained monoethyne trans-nickelacycloheptatriene is formed. This trans intermediate is unable to reductively eliminate benzene without prior isomerization to a cis-structure. Instead, it rapidly collapses to a nickelacyclononatetraene. Ethyne coordination induces reductive elimination to the cyclooctatetraene complex Ni(eta(2)-C(2)H(2))(eta(2)-C(8)H(8)), followed by facile ligand exchange. Other ethyne coupling pathways have been computed to be less favored. The cyclooctatetraene ligand binds significantly weaker to nickel(0) than ethyne, both for mononuclear, and for dinuclear species. For this reason, C--C bond formation steps at Ni(2)(micro-cot) fragments have been predicted to feature prohibitively high overall reaction barriers.     

DFT法研究分子筛催化trans-2-丁烯的双键异构

利用一个3T簇模型模拟分子筛催化剂的酸性位, 采用密度泛函理论(DFT)的 B3LYP/6-31G(d, p)方法, 研究了分子筛催化1-丁烯双键异构为trans-2-丁烯的反应机理. 对反应各驻点进行了全优化, 经过零点能校正后, 得到了反应的活化能. 研究表明, 反应分三步进行：物理吸附→化学反应→物理脱附. 分子筛的酸性位OH基团首先吸附1-丁烯的双键形成了π配位复合物, 然后按协同反应机理发生双键异构反应, 生成吸附态的trans-2-丁烯, 最后脱附成产物. 计算得到的表观活化能为57.1 kJ•mol^-1, 与实验结果接近.     

聚乙二醇蓄热调温性能及其在功能纺织品上的应用

对聚乙二醇(PEG)的自身交联及其与纤维素纤雏之间的交联反应进行了研究，探讨了交联前后PEG热活性的变化，并对PEG在焙烘交联时的受热稳定性以及分子量对热活性的影响进行了讨论。研究表明，PEG发生交联反应后，热性能参教产生偏移，热活性降低；热活性与分子量有直接关系；过高的焙烘温度将导致PEG氧化降解，热活性下降。在适宜的工艺条件下，纺织品经PEG后整理可获得热活性。     

Inner shell structure of heavy atoms

The inner-shell structure of some heavy atoms is examined using a self-consistent relativistic local density method. Ar(K), Kr(K) and Xe (K,L ₁,L ₂ andL ₃) binding energies and {ie863-1} (hyper-satellite) energies of Tl, Hg and Tm are calculated. The results are compared with available experimental data. A part of this work was presented byMPD at the Trieste International Symposium on “Core level excitations in atoms, molecules and solids,” 22–26 June 1981, Extended Abstracts (ed.) E Tosatti, ICTP Report No. 89/81 p. 11.     

An application of correlation energy density functionals to atoms and molecules

Four density functionals — including that recently introduced by Perdew ((1986) Phys Rev B33: 8822)—are tested for first-row atoms, hydrides and dimers. Calculated contributions of the correlation energy to the ionization potentials and electron affinities of atoms and to the dissociation energies of molecules are compared with empirical values which were reevaluated for this purpose. An improvement over Hartree-Fock is found in all cases if the self-interaction or the gradient correction are included in the density functional, although there is a rather large variation in the accuracy of the predictions.     

高分子效应

用许多杰出的实例,从高分子骨架的机械支架作用、邻基效应、协同效应、模板聚合等诸方面探论了高分子效应。     

LaC_3~n(n=-1,0,+1)分子簇的理论研究(英文)

用密度泛函方法研究了ＬａＣ３ｎ（ｎ＝－１，０，＋１）分子簇的结构和稳定性，对这个四原子体系，提出了５种可能构型，其中３种具有Ｃ２ｖ对称性，２种为Ｃ∞ｖ对称性．在Ｃ２ｖ对称性结构中，其中１个为Ｌａ接在弯曲的Ｃ３链上，第２个是Ｌａ通过２个键与Ｃ３环相链，第３个是Ｌａ通过１个键与Ｃ３环相连；在Ｃ∞ｖ对称性中，第１个Ｌａ接在Ｃ３链的一端，而在第２个构型中，Ｌａ被插入在Ｃ３链中．结果表明，环状结构当Ｌａ接在弯曲的Ｃ３链上的是局域极小值并且最稳定     

~(13)C代谢通量分析

代谢通量分析(metabolic flux analysis,MFA)是通过确定代谢网络中代谢流分布来表征细胞代谢状态的强有力的工具。鉴于计量学代谢通量分析在处理复杂代谢网络时表现出的局限性,发展了以13C标记实验为基础的13C MFA。本文介绍了13C MFA的原理与方法,总结和评述了13C MFA在实验与数据分析方面的最新进展以及MFA在功能基因组研究中的重要地位,同时对代谢通量分析的发展前景进行了展望。     

Comparison of side-on and end-on coordination of E2 ligands in complexes [W(CO)5E2] (E=N,P, As,Sb, Bi,Si-, Ge-, Sn-, Pb-)

Complexes of W(CO)(5) with neutral diatomic pnictogen ligands N(2), P(2), As(2), Sb(2), and Bi(2) and anionic Group 14 ligands Si(2) (2-), Ge(2) (2-), Sn(2) (2-), and Pb(2) (2-) coordinated in both side-on and end-on fashion have been optimized by using density functional theory at the BP86 level with valence sets of TZP quality. The calculated bond energies have been used to compare the preferential binding modes of each respective ligand. The results were interpreted by analyzing the nature of the interaction between the ligands and the metal fragment using an energy partitioning method. This yields quantitative information regarding the strength of covalent and electrostatic interactions between the metal and ligand, as well as the contributions by orbitals of different symmetry to the covalent bonding. Results show that all the ligands studied bind preferentially in a side-on coordination mode, with the exception of N(2), which prefers to coordinate in an end-on mode. The preference of the heavier homologues P(2)-Bi(2) for binding in a side-on mode over the end-on mode in the neutral complexes [(CO)(5)WE(2)] comes mainly from the much stronger electrostatic attraction in the former species. The energy difference between the side-on and end-on isomers of the negatively charged complexes with the ligands Si(2) (2-), Ge(2) (2-), Sn(2) (2-), and Pb(2) (2-) is much less and it cannot be ascribed to a particular bonding component.