General strategy for a short and efficient synthesis of 3-hydroxy-4-methylprolines (HMP)

The non-proteinogenic amino acid 3-hydroxy-4-methylproline (HMP) is an active constituent of some potent antimicrobials including echinocandins, nostopeptins, pneumocandins, sporiofungin and mulundocandins. A synthesis has been achieved in 10 steps with 29% overall yield; the Evans’ aldol reaction using Crimmins’ modified method was pivotal to the success of the strategy.     

Heck reactions of stilbenoid chromophores with alkoxysilyl-substituted styrenes: Synthesis of monomers for luminescent polymers

Luminescent stilbenoid chromophores with diethoxysilane end groups are prepared via Heck reactions. Diethoxysilane-substituted styrenes are used as vinylic components, thus allowing the combined connection of the chromophore to the silane moiety with an extension of the π-system. Monodisperse oligo(phenylenevinylene)s of different conjugation lengths and bromine or iodine as reactive sites are used as coupling partners. Electrical and optical properties are tuned via the length of the conjugated system, electron withdrawing cyanide and electron donating alkoxy side chains, the latter guarantee high solubility of the final compounds.Dedicated to Prof. Dr. H. Ringsdorf on the occasion of his 75th birthday     

Comparison of the boundary theory with the contact rule of phase regions and Gupta’s method

The phase boundary theory and the contact rule of phase regions are compared, and some weaknesses of the latter are manifested. The comparison between the Gupta’s method and the boundary theory method for constructing multicomponent isobaric sections is also presented.     

Theoretical studies on the role of pi-electron delocalization in determining the conformation of N-benzylideneaniline with three types of LMO basis sets

To understand the role of pi-electron delocalization in determining the conformation of the NBA (Ph-N==CH-Ph) molecule, the following three LMO (localized molecular orbital) basis sets are constructed: a LFMO (highly localized fragment molecular orbital), an NBO (natural bond orbital), and a special NBO (NBO-II) basis sets, and their localization degrees are evaluated with our suggesting index D(L). Afterward, the vertical resonance energy DeltaE(V) is obtained from the Morokuma's energy partition over each of three LMO basis sets. DeltaE(V) = DeltaE(H) (one electron energy) + DeltaE(two) (two electron energy), and DeltaE(two) = DeltaE(Cou) (Coulomb) + DeltaE(ex) (exchange) + DeltaE(ec) (or SigmaDeltaE(n)) (electron correction). DeltaE(H) is always stabilizing, and DeltaE(Cou) is destabilizing for all time. In the case of the LFMO basis set, DeltaE(Cou) is so great that DeltaE(two) > |DeltaE(H)|. Therefore, DeltaE(V) is always destabilizing, and is least destabilizing at about the theta = 90 degrees geometry. Of the three calculation methods such as HF, DFT, and MPn (n = 2, 3, and 4), the MPn method provides DeltaE(V) with the greatest value. In the case of the NBO basis set, on the contrary, DeltaE(V) is stabilizing due to DeltaE(Cou) being less destabilizing, and it is most stabilizing at a planar geometry. The LFMO basis set has the highest localization degree, and it is most appropriate for the energy partition. In the NBA molecule, pi-electron delocalization is destabilization, and it has a tendency to distort the NBA molecular away from its planar geometry as far as possible.     

Measurement of viscoelastic properties for polymers by nanoindentation

A new method has been proposed and verified to measure the viscoelastic properties of polymers by nanoindentation tests. With the mechanical response of load–displacement curves at different loading rates, the parameters of creep compliance and relaxation modulus are calculated through the viscoelastic contact model. Dynamic thermomechanical analysis (DMA) tests are conducted to compare the results by the proposed technique. The results show that the correlation coefficients between DMA tests and the new method are above 0.9 in the entire range, which verified the feasibility of the method. The loading curves fitted by the model are identical to the experimental curves within the discrete points and so it shows that this technique is more suitable for general linear viscoelastic materials. Numerical creep tests are carried out to examine the effectiveness of the proposed method by input the Prony series calculated by the three-element Maxwell model and the viscoelastic contact model. The good agreement shows that the proposed technique can be applied in practice.     

Structural and luminescence characteristics of CuAlxIn1−xSe2 (0 < x ≤ 0.30) chalcopyrite solid solutions

1. Download : Download high-res image (112KB)
2. Download : Download full-size image

     

Rapid Mo(CO)6 catalysed one-pot deoxygenation of heterocyclic halo-benzyl alcohols with Lawesson’s reagent

A fast and efficient microwave promoted one-pot method for deoxygenation of heterocyclic halo-benzyl alcohols has been developed. The method does not cause dehalogenation of the substrates and provides the deoxygenated products in high yield after only 30 min.     

2-Methylthio-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-<Emphasis Type="Italic">a</Emphasis>]pyrimidin-5- and -7-Ones

The cyclocondensation of methylcinnamates and arylidene derivatives of Meldrums acid with 3-amino-5-methylthio-1,2,4-triazole in DMF gives 2-methylthio-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]-pyrimidin-5-ones. The reaction involving arylidene derivatives of Meldrums acid or its synthetic equivalents in ethyl acetate with a catalytic amount of pyridine gives a mixture of 2-methylthio-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidin-5- and -7-ones.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 246–251, February, 2005.     

Enzymatic transformation of bacterial polyhydroxyalkanoates into repolymerizable oligomers directed towards chemical recycling

The enzymatic transformation into an oligomer was carried out with the objective of developing the chemical recycling of bacterial polyesters. Poly(R-3-hydroxyalkanoate)s (PHAs), such as poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyhexanoate)] and poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyvalerate)], were degraded by granulated Candida antarctica lipase B immobilized on hydrophilic silica (lipase GCA) in a diluted organic solvent at 70 degrees C. The degradation products were cyclic oligomers having a molecular weight of a few hundreds. The obtained cyclic oligomer was readily repolymerized by the same lipase (lipase GCA) to produce the corresponding polyester in a concentrated solution. The cyclic oligomer was copolymerized with epsilon-caprolactone using lipase to produce the corresponding terpolymers having an Mw of 21,000. This is the first example of the enzymatic chemical recycling of bacterial PHAs using lipase. Poly(R-3-hydroxybutyrate) [P(3HB)] was also degraded into the linear-type R-3HB monomer to trimer by P(3HB)-depolymerase (PHBDP) in phosphate buffer at 37 degrees C. The degradation using PHBDP required a longer reaction time compared with the lipase-catalyzed degradation in organic solvent. The monomer composition of the oligomer depended on the origin of the PHBDP. The R-3HB monomer was predominately produced by PHBDP from Pseudomonas stutzeri, while the R-3HB dimer was produced by PHBDP from Alcaligenes faecalis T1. Repolymerization of these oligomers by lipase in concentrated organic solvent produced a relatively low-molecular-weight P(3HB) (e.g., Mw=2,000). Degradation of P(3HB) by lipase in organic solvent into repolymerizable cyclic oligomer and degradation of P(3HB) by PHBDP in buffer into hydroxy acid type R-3HB dimer.     

Synthesis of Some Novel 3,6‐Bis(1,2,3‐triazolyl)‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazole Derivatives

The cyclization of 1‐amino‐2‐mercapto‐5‐[1‐(4‐ethoxyphenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐1,3,4‐triazole which was synthesized from p‐ethoxyaniline with various triazole acid in absolute phosphorus oxychloride yields 3,6‐bis(1,2,3‐triazolyl)‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazole derivatives 9a?j , and their structures are established by MS, IR, CHN and ¹H NMR spectral data.