配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

羟基取代烷基苯磺酸盐界面扩张粘弹性质

研究了2-羟基-3,5-二癸基苯磺酸钠(C10C10OHphSO3Na)表面和正癸烷-水界面上的扩张粘弹性质, 考察了平衡时间对界面性质的影响. 研究结果表明, 羟基取代烷基苯磺酸钠具有十分特异的界面性质, 其扩张模量比一般表面活性剂大一个数量级, 达到平衡的时间较长, 形成的界面膜弹性较大. 界面张力弛豫测定结果表明, 平衡时界面上存在特征时间长达103 s的慢过程. 上述实验结果可能是由于羟基间形成氢键造成的.     

Colloidal crystals of core-shell type spheres with poly(styrene) core and poly(ethylene oxide) shell

Elastic modulus and crystal growth kinetics have been studied for colloidal crystals of core–shell type colloidal spheres (diameter = 160–200 nm) in aqueous suspension. Crystallization properties of three kinds of spheres, which have poly(styrene) core and poly(ethylene oxide) shell with different oxyethylene chain length (n = 50, 80 and 150), were examined by reflection spectroscopy. The suspensions were deionized exhaustively for more than 1 year using mixed bed of ion-exchange resins. The rigidities of the crystals range from 0.11 to 120 Pa and from 0.56 to 76 Pa for the spheres of n = 50 and 80, respectively, and increase sharply as the sphere volume fraction increase. The g factor, parameter for crystal stability, range from 0.029 to 0.13 and from 0.040 to 0.11 for the spheres of n = 50 and 80, respectively. These g values indicate the formation of stable crystals, and the values were decreased as the sphere volume fraction increased. Two components of crystal growth rate coefficients, fast and slow, were observed in the order from 10⁻³ to 10¹ s⁻¹. This is due to the secondary process in the colloidal crystallization mechanism, corresponding to reorientation from metastable crystals formed in the primary process and/or Ostwald-ripening process. There are no distinct differences in the structural, kinetic and elastic properties among the colloidal crystals of the different core–shell size spheres, nor difference between those of core–shell spheres and silica or poly(styrene) spheres. The results are very reasonably interpreted by the fact that colloidal crystals are formed in a closed container owing to long-range repulsive forces and the Brownian movement of colloidal spheres surrounded by extended electrical double layers, and their formation is not influenced by the rigidity and internal structure of the spheres.     

Determination of the electric field gradient asymmetry from Berry’s phase in NQR of powder samples

An effect of Berry’s phase on the NQR spectrum of the rotating powder sample is described and applied for the determination of the electric field gradient asymmetry. The proposed method involves the analysis of the frequency singularities in the NQR powder patterns of the rotating samples. The Berry’s phases for the eigenstates, associated with an adiabatically changing quadrupole hamiltonian, are calculated for nuclei with a spin I = 3/2 and I = 1 as a function of the asymmetry parameter.     

Validated Enantioselective LC Method, with Precolumn Derivatization with Marfey’s Reagent, for Analysis of the Antiepileptic Drug Pregabalin in Bulk Drug Samples

An enantioselective high-performance liquid chromatographic method, with precolumn derivatization with Marfey’s chiral reagent, sodium 2,4-dinitro-5-fluorophenyl-l-alanine amide, has been developed for resolution of the enantiomers of a new antiepileptic drug, pregabalin, in the bulk drug. The diastereomers of the pregabalin enantiomers were resolved to baseline on a reversed-phase ODS column with a 60:40 (v/v) mixture of aqueous 0.2% triethylamine (pH adjusted to 3.5 with dilute orthophosphoric acid) and acetonitrile as mobile phase. Resolution between the diastereomers was not less than five. The method was extensively validated and proved to be robust. The calibration plot was indicative of an excellent linear relationship between response and concentration over the range 750 (LOQ) to 7,500 ng L⁻¹ for the R enantiomer. The limits of detection and quantification of the R enantiomer were 250 and 750 ng L⁻¹, respectively, for an injection volume of 10 μL. Recovery of the R enantiomer from bulk drug samples of pregabalin ranged from 97.5 to 101.76%. Solutions of pregabalin in water and in the mobile phase were found to be stable for at least 48 h. The method was found to be suitable and accurate for quantitative determination of the R enantiomer in the bulk drug. It can be also used to test the stability of samples of pregabalin.     

Interaction of aminoazoles with Meldrum’s acid and dialkyl ketones or cyclohexanone

Interaction of 3-amino-5-methylpyrazole, 3-amino-5-methylthio-, and 3,5-diamino-1,2,4-triazole with Meldrum’s acid, acetone, ethyl methyl ketone, and cyclohexanone leads to alkyl-substituted pyrazolo[3,4-b]pyridin-6-ones and 1,2,4-triazolo[1,5-a]pyrimidin-7-ones respectively. The structure of 5,5-dimethyl-2-methylthio-4,5,6,7-tetrahydro-1,2,4-triazolo[1,5-a]pyrimidin-7-one was demonstrated by an X-ray structural investigation. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 595–601, April, 2007.     

Topochemical models for anti-HIV activity of 1-alkoxy-5-alkyl-6-(arylthio)uracils

Relationship between topochemical indices and anti-HIV-1 (HTLV-III) inhibitory activity of 1-alkoxy-5-alkyl-6-(arylthio)uracils has been studied. Superadjacency, an adjacency-cum-distance-based, topochemical index and Wiener’s, a distance-based, topochemical index were calculated for a set of 36 1-alkoxy-5-alkyl-6-(arylthio)uracils. Resulting data were analyzed and suitable models were developed after identification of the active ranges. Subsequently, a biological activity was assigned to each of the compounds using these models and compared with the reported anti-HIV-1 activity. High accuracy of prediction was observed using these models. Statistical analysis revealed significance of the proposed models as well as a lack of correlation between the topochemical indices employed for the chosen data set.     

Metal-amyloid-β peptide interactions: a preliminary investigation of molecular mechanisms for Alzheimer''''s disease

Although humans have spent exactly 100 years combating Alzheimer's disease (AD), the molecular mechanisms of AD remain unclear. Owing to the rapid growth of the oldest age groups of the population and the continuous increase of the incidence of AD, it has become one of the crucial problems to modern sciences. It would be impossible to prevent or reverse AD at the root without elucidating its molecular mechanisms. From the point of view of metal-amyloid-β peptide (Aβ) interactions, we review the molecular mechanisms of AD, mainly including Cu2 and Zn2 inducing the aggregation of Aβ, catalysing the production of active oxygen species from Aβ, as well as interacting with the ion-channel-like structures of Aβ. Moreover, the development of therapeutic drugs on the basis of metal-Aβ interactions is also briefly introduced. With the increasingly rapid progress of the molecular mechanisms of AD, we are now entering a new dawn that promises the delivery of revolutionary developments for the control of dementias.