Ultra-intense femtosecond super-heavy ion beams driven by a multi-PW laser

The paper reports the results of numerical studies on the laser-driven acceleration of super-heavy ions by a multi-PW laser pulse of ultra-relativistic intensity attainable with the Extreme Light Infrastructure lasers currently being built in Europe. Using a multi-dimensional (2D3V) particle-in-cell code, it is shown that multi-GeV super-heavy (thorium) ion beams with an intensity of $～{10}^{21}\text{–}{10}^{22}\text{W}/{\text{cm}}^2$, fluence $～{10}^{17}\text{–}{10}^{18}{\text{cm}}^{?2}$ and time duration $～20\text{–}100\text{fs}$ can be produced from a sub-μm thorium target irradiated by a 150-J, 20-fs laser pulse with an intensity of ${10}^{23}\text{W}/{\text{cm}}^2$. Such ion beams are impossible to obtain presently with the use of conventional RF-driven accelerators, so they can open the door to new areas of research in both nuclear and high energy-density physics.     

Electron Acceleration by Beating of Two Intense Cross-Focused Hollow Gaussian Laser Beams in Plasma

This paper presents propagation of two cross-focused intense hollow Gaussian laser beams(HGBs) in collisionless plasma and its effect on the generation of electron plasma wave(EPW) and electron acceleration process,when relativistic and ponderomotive nonlinearities are simultaneously operative. Nonlinear differential equations have been set up for beamwidth of laser beams, power of generated EPW, and energy gain by electrons using WKB and paraxial approximations. Numerical simulations have been carried out to investigate the effect of typical laser-plasma parameters on the focusing of laser beams in plasmas and further its effect on power of excited EPW and acceleration of electrons. It is observed that focusing of two laser beams in plasma increases for higher order of hollow Gaussian beams,which significantly enhanced the power of generated EPW and energy gain. The amplitude of EPW and energy gain by electrons is found to enhance with an increase in the intensity of laser beams and plasma density. This study will be useful to plasma beat wave accelerator and in other applications requiring multiple laser beams.     

Temperature dependence of the properties of strong-coupling bipolaron in a quantum dot

Temperature dependence of the properties of strong-coupling bipolaron in a quantum dot (QD) is studied based on the Lee-Low-Pines-Huybrechts variational method and quantum statistical theory. Results of the numerical calculation show that the vibration frequency as well as the absolute value of the induced potential and the effective potential all increase with increasing coupling strength and temperature, respectively, and they also increase with decreasing relative distance of electrons. The bipolarons are closer and more stable when the temperature is higher and coupling strength is larger. The influence of radius of QD and dielectric constant ratio on the effective potential is little.     

超声波原油破乳脱水的声场参数实验研究

本文阐明了超声波原油破乳脱水基本原理,实验研究了超声场参数对脱水率的影响,其中,声强,辐照时间和频率和影响原油脱水率的主要因素,而间歇比,脉冲宽度为次要回素,对本实验系统而言,声场参数有一个最佳值或范围,声强0.65W/cm^2,频率20kHz,间歇比8,脉冲宽度9.7ms,辐照时间5－10min.     

单片机在重力加速度测量中的应用

本文介绍用ＤＶＣＣ—５１—ＧＬ单片单板机在重力加速度测量中的基本原理与方法。     

Display of tilt information of vibrating object in time average mode using lateral shearing interferometry and interferometric grating

We have experimentally demonstrated vibration analysis of a reflecting object in time-average mode using shearing interferometry and interferometric grating. Experimental results show that time-average moiré fringes, formed between fringe pattern reflected from object and sinusoidal grating are modulated spatially by the amplitude of vibrating tilt. From the experimental results, information regarding tilt of vibrating objects can be determined.     

Vibration analysis of truncated conical shells subjected to flowing fluid

A method to predict the dynamic behaviour of anisotropic truncated conical shells conveying fluid is presented in this paper. It is a combination of finite element method and classical shell theory. The displacement functions are derived from exact solutions of Sanders’ shell equilibrium equations of conical shells. The velocity potential, Bernoulli’s equation and impermeability condition have been applied to the shell–fluid interface to obtain an explicit expression for fluid pressure which yields three forces (inertial, centrifugal, Coriolis) of the moving fluid. To the best of the authors’ knowledge, this paper reports the first comparison made between two works which deal with conical shells subjected to internal flowing fluid effects. The results obtained by this method for conical shells with various boundary condition and geometries, in vacuum, fully-filled and when subjected to flowing fluid were compared with those of other experimental and numerical investigations and good agreement was obtained.     

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Vibration isolation plays an important role in both the vibration and noise control of building services equipment. To evaluate vibration isolation performance, the force transmissibility method is commonly adopted. However, increasing the damping effect in the force transmissibility method reduces both the resonance peak value and the isolation performance in the “isolation region”. The limitation of the method is that the transmitted displacement of a floor structure and the interaction of mounting points are neglected. To include the floor displacement and the interaction of mounting points, Mak and Su recently proposed the power transmissibility method to assess the performance of vibration isolation. In this paper, the effect of viscous damping on power transmissibility is investigated. A practical procedure for experimentally determining the damping ratio is also given.     

Dominant modes of submerged thin cylindrical shells

The relationship between the dominant mode of the submerged thin cylindrical shell and the flexural wave velocity is investigated. The natural frequency corresponding to the vibration mode is obtained as the solution of characteristic equation of thin cylindrical shell. However, it is difficult to estimate the dominant mode, especially if two or more vibration modes are involved. To estimate the dominant mode of a thin shell in vacuo, the concept of “modified bending stiffness” has been introduced. In this paper, the concept of modified bending stiffness is extended to estimate the dominant mode of a submerged thin cylindrical shell. The dominant mode of a submerged thin cylindrical shell is theoretically discriminated from the other mode based on the smallness of the modified bending stiffness of the submerged shell. The validity of our theory is confirmed by a good agreement between theoretical and experimental results on flexural wave velocity.     

Synergistic effects on iodine release in potassium iodide solution by combination of ultrasound and visible light irradiations

Iodine release in potassium iodide solution has been investigated under the irradiations of ultrasound and visible light respectively and simultaneously. We have observed that the amount of iodine liberated under the combined irradiation of ultrasound and visible light is larger than the sum of that under the respective irradiations of ultrasound and visible light, indicating a synergistic effect of ultrasound and visible light irradiations. Based on the investigation of the reaction kinetics of iodine liberated, we have ascribed the synergistic effect to the perfect stirring of the photochemical reactor induced by the applying simultaneous ultrasound. The ideal stirring can result in the homogenization of the primary light effect in the whole reaction medium, which induces the acceleration of the photochemical reaction. On behavior of our knowledge, there are few reports on the investigations of utilizing the combination of ultrasonic energy and light energy to accelerate the reaction yield and rate as well as the kinetics of the reaction.