Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

Excitation Cross Section for Resonance Transitions of Rhenium Atoms Excited by Slow Electrons

Excitation of rhenium atoms by electron impact is investigated by the method of extended crossing beams. At electron energies of 50 eV, the excitation cross sections of 36 resonance and competing transitions in ReI are measured. Within the energy range from the threshold value to 250 eV, six optical excitation functions are detected. The reliability of data on transition probabilities in ReI has been analyzed.     

Au等离子体M带5f-3d跃迁的电子离子碰撞激发速率系数

电子离子碰撞激发速率系数在超组态碰撞辐射模型中真实模拟非局域热动力学平衡Au激光等离子体M带谱 5f 3d跃迁中各种复杂电荷态离子的电离态特性 (譬如离子的平均电离度 ,相对丰度和能级布居数 )是必不可少的。基于准相对论多组态Hartree Fock方法和扭曲波玻恩交换近似 ,采用自编的扭曲波程序ACDW (9)和Fit(9) ,从头计算了Au等离子体M带 5f 3d电子离子碰撞激发速率系数。结果表明 :在“神光II”实验装置诊断的电子温度约 2keV ,电子密度约 6× 10 2 1cm-3 范围内 ,这些电子离子碰撞激发参数有利于采用超组态碰撞辐射模型模拟Au的激光等离子体M带 5f～ 3d细致谱的平均电离度和电荷态分布。     

Collective bounce-off phenomenon in139La+Ag(Br) reaction at 1.1 A GeV energy

Out of a total statistics of 896¹³⁹La+Ag(Br) interactions, 128 interactions having multiplicity of target fragments (Z⩾1)⩾8 and projectile fragments (Z⩾2)⩾4 have been selected. They correspond to quasi-peripheral interactions. Azimuthal angle correlation between sources of target fragments (TFs) and projectile fragments (PFs) shows the existence of bounce-off effect. Using data of La+Ag(Br) and⁸⁴Kr+Ag(Br) reactions it is shown that individual helium [Z=2, PFs] and heavier fragment [Z⩾3, PFs] show different emission characteristics. Further, a two prong correlation functionT(Φ _ij ) plotted for heavier fragments and helium fragments separately, indicates the possibility of existence of different physical conditions. This observation is supported by the different momentum widths of helium fragments and heavier fragments. From the momentum width data of Kr+Ag(Br) reactions normalized density comes out to be ≈4.7. Using quasi-elastic kinematics for the bounce-off nuclei, the excitation energy has been computed from the experimental data of flow angles. The strength of bounce-off seems to decrease with the increase of excitation energy or temperature.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Vehicle and personnel routing optimization in the service sector: application to water distribution and treatment

We present an overview of the author’s Ph.D. thesis, supervised by P. Dejax and N. Bostel, which was defended in February 2006 at école des Mines de Nantes, France. The thesis is written in French, and is available at . It was conducted in the context of a research contract with a water distribution company. In a first section, we define multiperiod routing problems for service technicians. In a second section, we present some heuristics and a memetic algorithm used to solve these problems. The third section introduces optimal and near-optimal approaches based on column generation. Finally, we present some applications to the real-life case. The methods presented in Sects. 2, 3 and 4 were tested over several sets of problems, based on real-life statistics provided by the company.      

Experimental verification of drop/impact simulation for a cellular phone

Conducting drop tests to investigate impact behavior and identify failure mechanisms of small-size electronic products is generally expensive and time-consuming. Nevertheless, strict drop/impact performance criteria for hand-held electronic products such as cellular phones play a decisive role in the design because they must withstand unexpected shocks. The design of product durability on impact has heavily relied on the designer's intuition and experience. In this study, a reliable drop/impact simulation for a cellular phone is carried out using the explicit code LS-DYNA. Subsequently globallocal experimental verification is accomplished by means of high-speed photography and impact response measurement. Using this methodology, we predict potential damage locations in a cellular phone and compare them with real statistical data. It is envisaged that development of a reliable methodology of drop/impact simulation will provide us with a powerful and efficient vehicle for improvement of the design quality and reduction of the product development cycle.     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Communication Roles, Perceived Effectiveness, and Satisfaction in an Environmental Management Program

Earlier research has shown a relationship between various forms of structural centrality and perceived leadership and role satisfaction in small experimental groups. The limited amount of research on this topic in naturally occurring social networks has yielded results that often conflict with one another. Different results have generally been attributed to possible differences in task environments. This paper examines the relationship between two types of structural centrality and perceived influence, role satisfaction, and perceived effectiveness in an environmental resource management program. Findings in this paper suggest that the observed differences in relationships between the network and other variables is partly a function of global network properties (e.g., marginality of subgroups) and related task environments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Experimental investigation on large deflection response of a frame impacted by a moving body

This paper reports on the experimental investigation of the dynamic large deflection response of a portal frame impacted at its midspan by a body moving at a certain speed. Both the deflection and velocity vs. time curves of the midspan and the dynamic history of a number of desired locations were recorded during the process of response. On the basis of the test data, the momentum and kinetic energy conversion between the frame and the moving body in the impact process are realized, and the occurrence and expansion of plastic regions are described. Investigation results show that the initial collision is approximately ideally inelastic, and that the elastic deformation plays a considerable role in the response though the input energy is much larger than the maximum elastic energy capacity of the beam member; therefore, in a general impact, the energy ratio should not be regarded as a sufficient criterion for a rigid—plastic solution. The ratios of the impulse transferred to and the energy absorbed by the frame in the initial collision to that carried by the moving body before impact is only related to the ratiobetween the equivalent mass of the frame paticipating in the initial collision and the mass of the impacting body, having nothing to do with the impacting velocity to a certain extent.