Real‐Time Atomic‐Scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

By using in situ aberration‐corrected environmental transmission electron microscopy, for the first time at atomic level, the dynamic evolution of the Cu surface is captured during CO oxidation. Under reaction conditions, the Cu surface is activated, typically involving 2–3 atomic layers with the formation of a reversible metastable phase that only exists during catalytic reactions. The distinctive role of CO and O₂ in the surface activation is revealed, which features CO exposure to lead to surface roughening and consequently formation of low‐coordinated Cu atoms, while O₂ exposure induces a quasi‐crystalline CuOx phase. Supported by DFT calculations, it is shown that crystalline CuOx reversibly transforms into the amorphous phase, acting as an active species to facilitate the interaction of gas reactants and catalyzing CO oxidation.     

Organophosphate esters by GC–MS: An optimized method for aquatic risk assessment

Organophosphate esters used as flame retardants and plasticizers are ubiquitous contaminants in surface waters. Many studies indicate that these compounds are neurotoxicants, endocrine disruptors, and may affect reproduction and development of aquatic organisms. Thus, analytical methods that allow accurate quantification of these contaminants at environmentally relevant concentrations are desirable for risk assessment studies. In this study, a method based on solid phase extraction and gas chromatography coupled to mass spectrometry was developed for determination of organophosphate esters in river water extracts. Multivariate optimization was used to determine the best conditions for injection of larger volumes of sample in a Programmable Temperature Vaporization inlet. Furthermore, the matrix effect on the instrumental response was evaluated and compensated by association of extraction‐blank‐matched calibration and isotopically labeled focus standards. The method quantification limits ranged from 0.009 to 0.11 µg/L, staying below the predicted non‐effect concentration for the aquatic compartment for all analytes, which is a requisite for using in risk assessment studies. The method was applied to freshwater samples collected in rivers from the Sao Paulo State, Brazil, and eight out of the ten target organophosphate esters were quantified, being tris(2‐chloroisopropyl) phosphate and tris(phenyl) phosphate the most frequently detected compounds.     

碳纤维复合材料冲击模型率相关修正方法与试验研究

目前先进航空发动机的风扇叶片均采用复合材料结构,为了研究其在工作过程中可能受到的冲击损伤,即碳纤维增强树脂基复合材料受到高速冲击后的损伤与破坏过程,对其准静态下的正交各向异性本构模型和失效准则进行修正,建立了应变率相关的三维动态本构及损伤模型．该模型考虑了材料模量、强度和断裂韧性与应变率的相关性,并采用基于断裂韧性的渐进损伤模式对刚度进行折减来控制破坏过程．开展了不同应变率下的动态试验,得到基体方向拉伸与剪切的动态响应数据,拟合得到相应的动态修正因子．将该模型结合修正因子植入数值软件进行仿真计算,分析结果表明,所建立的率相关本构及损伤模型能够更准确地模拟层合板受冲击过程的损伤和破坏,与试验吻合较好．     

滑坡冲击铲刮变量的计算方法研究

高速远程滑坡运动过程中,冲击铲刮效应不仅增加滑坡的体积与规模,而且会增大滑坡成灾范围,风险预测与判断出现明显误差,导致灾难性事件的发生。目前对于高速滑坡的铲刮深度、铲刮范围和铲刮体积等变量计算往往是采用基于经验的铲刮率算法,其是通过体积增量来反算铲刮变量的数学方法,而实际情况中高速滑坡的冲击铲刮是滑体冲击力和地表可铲刮材料之间的力学屈服破坏作用的结果。本文基于接触力学、弹塑性力学和岩土力学,提出了地表可铲刮层在附加冲击荷载作用下铲刮变量的理论计算方法,认为竖向冲击和切向剪切是滑体冲击铲刮过程的两种主要作用方式。结合实际岩土体材料参数,发现不考虑切向荷载时,铲刮层塑性区主要以竖向破裂区为主,考虑切向荷载时,铲刮层塑性区沿切向迁移,直至塑性边界贯通至地表,符合实际情况,实现了对铲刮变量的定量化计算。     

基于FDM-DEM耦合的冲击损伤大理岩静态断裂力学特征研究

为探究循环冲击损伤后大理岩的静态断裂力学特征,基于有限差分（finite difference method,FDM）-离散元（discrete element method,DEM）耦合的建模技术构建了三维分离式霍普金森压杆（split Hopkinson pressure bar,SHPB）数值模型,其中杆件系统和岩石试件分别采用FLAC3D和PFC3D程序建模。利用该模型对中心直切槽半圆盘（NSCB）试样进行了恒定子弹速度下的循环冲击,随后对受损试样进行静态三点弯曲断裂实验。通过编写Fish程序,提取试样断裂面数据,对断裂面进行重构并定量计算表面粗糙度。通过与相关室内实验结果的对比分析,验证了本文数值分析的合理性与可靠性。模拟结果表明,随着循环冲击次数的增加,试样内部微裂纹、破碎颗粒均增加。连接力场分布混乱,部分力链发生断裂。力链的变化是试样力学性能劣化的根本原因。在静态三点弯曲断裂实验中,冲击5次后试样的静态断裂韧度较天然试样产生一定程度的降低。试样在静载过程中产生的微裂纹和碎块的数量随循环冲击次数的增加而增加,断裂面粗糙度随循环冲击次数的增加而增加。     

The Cradle-to-Cradle Life Cycle Assessment of Polyethylene terephthalate: Environmental Perspective

Over the last several years, the number of concepts and technologies enabling the production of environmentally friendly products (including materials, consumables, and services) has expanded. One of these ways is cradle-to-cradle (C2C) certified^TM. Life cycle assessment (LCA) technique is used to highlight the advantages of C2C and recycling as a method for reducing plastic pollution and fossil depletion by indicating the research limitations and gaps from an environmental perspective. Also, it estimates the resources requirements and focuses on sound products and processes. The C2C life cycle measurements for petroleum-based poly (ethylene terephthalate) (PET) bottles, with an emphasis on different end-of-life options for recycling, were taken for mainland China, in brief. It is considered that the product is manufactured through the extraction of crude oil into ethylene glycol and terephthalic acid. The CML analysis method was used in the LCIA for the selected midpoint impact categories. LCA of the product has shown a drastic aftermath in terms of environmental impacts and energy use. But the estimation of these consequences is always dependent on the system and boundary conditions that were evaluated throughout the study. The impacts that burden the environment are with the extraction of raw material, resin, and final product production. Minor influences occurred due to the waste recycling process. This suggests that waste degradation is the key process to reduce the environmental impacts of the production systems. Lowering a product’s environmental impact can be accomplished in a number of ways, including reducing the amount of materials used or choosing materials with a minimal environmental impact during manufacture processes.     

Analytical Methods for the Determination of 90Sr and 239,240Pu in Environmental Samples

Artificial long-lived radionuclides such as ⁹⁰Sr and ^239,240Pu have been long released into the environment by human nuclear activities, which have a profound impact on the ecological environment. It is of great significance to monitor the concentration of these radionuclides for environmental safety. This paper summarizes and critically discusses the separation and measurement methods for ultra-trace determination of ⁹⁰Sr, ²³⁹Pu, and ²⁴⁰Pu in the environment. After selecting the measurement method, it is necessary to consider the decontamination of the interference from matrix elements and the key elements, and this involves the choice of the separation method. Measurement methods include both radiometric methods and non-radiometric methods. Radiometric methods, including alpha spectroscopy, liquid scintillation spectrometry, etc., are commonly used methods for measuring ^239+240Pu and ⁹⁰Sr. Mass spectrometry, as the representative of non-radiometric measurement methods, has been regarded as the most promising analytical method due to its high absolute sensitivity, low detection limit, and relatively short sample-analysis time. Through the comparison of various measurement methods, the future development trend of radionuclide measurement is prospected in this review. The fully automatic and rapid analysis method is a highlight. The new mass spectrometer with ultra-high sensitivity shows strong analytical capabilities for extremely low concentrations of ⁹⁰Sr, ²³⁹Pu, and ²⁴⁰Pu, and it is expected to develop determination methods with higher sensitivity and lower detection limit.     

A PENNY-SHAPED CRACK IN A MAGNETOELECTROELASTIC LAYER UNDER RADIAL SHEAR IMPACT LOADING

This paper analyzes the dynamic magnetoelectroelastic behavior induced by a penny- shaped crack in a magnetoelectroelastic layer.The crack surfaces are subjected to only radial shear impact loading.The Laplace and Hankel transform techniques are employed to reduce the prob- lem to solving a Fredholm integral equation.The dynamic stress intensity factor is obtained and numerically calculated for different layer heights.And the corresponding static solution is given by simple analysis.It is seen that the dynamic stress intensity factor for cracks in a magnetoelec- troelastic layer has the same expression as that in a purely elastic material.And the influences of layer height on both the dynamic and static stress intensity factors are insignificant as h/a>2.     

ANALYTICAL EVALUATION OF PERMANENT DEFLECTION OF A THIN CIRCULAR PLATE STRUCK NORMALLY AT ITS CENTER BY A PROJECTILE

The permanent deflection of a thin circular plate struck normally at its center by a projectile is studied by an approximate theoretical analysis,FEM simulation and experiment.The plate made of rate sensitive and strain-hardening material undergoes serious local deformation but is not perforated during the impact.The theoretical analysis is based on an energy approach, in which the Cowper-Symonds equation is used for the consideration of strain rate sensitive effects and the parameters involved are determined with the aid of experimental data.The maximum permanent deflections predicted by the theoretical model are compared with those of FEM sim- ulation and published papers obtained both by theory and experiment,and good agreement is achieved for a wide range of thickness of the plates and initial impact velocities.