合肥光源慢加速过程中高频系统的调节

合肥光源是一台专用同步辐射光源,它在低能注入积累束流,然后同步地把束流加速到高能并在储存环中稳定运行。在加速过程中,粒子的同步辐射能量损失迅速增加,束流负载效应发生变化,需要相应地调节高频系统参数保持束流稳定。讨论了合肥光源加速过程中高频系统可能的两种高频系统调节方式以及高能情况下高频系统的最佳运行状态。     

直线加速器驻波腔中的瞬态束流负载效应

在高能加速器中, 随着单个束团和束团串中电荷量的提高, 当粒子束穿过加速腔的时候, 感应出的瞬态束流负载电压也越来越高. 但是, 在通常分析束流负载的时候, 往往对稳态束流负载研究的比较多, 而对瞬态束流负载的研究要相对少一些. 本文首先对束流负载的瞬态特性和束团穿过加速腔时高频源所看到谐振腔谐振频率的变化方式进行了分析, 然后又对两种情况下谐振腔的最优失谐条件进行了讨论, 并给出了相应的解析公式. 在第1种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率能够及时地得到调节, 从而使高频源的电流与谐振腔的腔压同相, 以提高高频源的效率; 在第2种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率保持不变, 不能被调节. 最后, 还对BEPCⅡ现有预注入器的预聚束腔、BEPCⅡ未来预注入器的两个次谐波聚束腔中的瞬态束流负载效应进行了分析.     

冲击作用下纳米孔洞动力学行为的多尺度方法模拟研究

本文利用多尺度方法研究了包含孔洞金属材料在冲击加载条件下的动力学行为. 该多尺度方法结合了分子动力学和有限元方法,分子动力学方法运用于局部缺陷区域,而有限元方法运用于整个模型区域,两种方法之间使用桥尺度函数进行连接. 计算结果既包括了系统宏观的物理信息,如应变场、应力场、温度场等,也得到了微观原子的物理信息,如原子能量和位置坐标等. 结合以上的模拟结果,发现孔洞的坍塌与材料屈服强度和冲击强度有关,而孔洞坍塌和坍塌过程中对微喷射原子的压缩过程是形成局部热点的主要原因. 同时也发现孔洞坍塌形成的位错和局部热点可以导致局部绝热剪切带更容易形成. 关键词： 微孔洞 热点 冲击加载 多尺度方法     

Acoustic Measures and Self-reports of Vocal Fatigue by Female Teachers

This study investigated the relation of symptoms of vocal fatigue to acoustic variables reflecting type of voice production and the effects of vocal loading. Seventy-nine female primary school teachers volunteered as subjects. Before and after a working day, (1) a 1-minute text reading sample was recorded at habitual loudness and loudly (as in large classroom), (2) a prolonged phonation on [a:] was recorded at habitual speaking pitch and loudness, and (3) a questionnaire about voice quality, ease, or difficulty of phonation and tiredness of throat was completed. The samples were analyzed for average fundamental frequency (F0), sound pressure level (SPL), and phonation type reflecting alpha ratio (SPL [1-5 kHz]-SPL [50 Hz-1 kHz]). The vowel samples were additionally analyzed for perturbation (jitter and shimmer). After a working day, F0, SPL, and alpha ratio were higher, jitter and shimmer values were lower, and more tiredness of throat was reported. The average levels of the acoustic parameters did not correlate with the symptoms. Increase in jitter and mean F0 in loud reading correlated with tiredness of throat. The results seem to suggest that, at least among experienced vocal professionals, voice production type had little relevance from the point of view of vocal fatigue reported. Differences in the acoustic parameters after a vocally loading working day mainly seem to reflect increased muscle activity as a consequence of vocal loading.     

Preparation and characterization of Pt-supported porous graphite nanofibers

In this work, porous graphite nanofibers (PGNFs) were manufactured as promising catalyst supporter by a physical activation method for direct methanol fuel cells, and Pt nanoparticles were loaded on the PGNFs in order to prepare electrode materials by a chemical reduction method. The pore structures of the Pt/PGNFs were analyzed by N₂ adsorption isotherms at 77 K. Electrocatalytic activities of final products were investigated by voltammetry and conductivity measurements in a 1.0 M CH₃OH/0.5 M H₂SO₄. As a result, electrocatalytic activities of Pt/PGNFs were increased in the presence of Pt particles on the PGNFs and with increasing the specific surface area of the carbons.     

Dynamic adhesive strength of fiber-polymer systems

A new device for studying the dynamic adhesive strength is created. A procedure for determining the dynamic adhesive strength in fiber—polymer systems under impact loading (pull-out technique) is developed. The adhesive strength of the interface of polymer—steel wire joints formed by polymers of different chemical nature (epoxy resin, polysulfone, and polypropylene) is examined. It is shown that the dynamic adhesive strength grows as the loading rate increases for all the systems under investigation and that the relationship between the adhesive strength and the loading rate, , over a wide range of rates can be described by two straight lines corresponding to the quasi-static and impact loading, respectively. When passing from the quasi-static to dynamic loading, the character of scale relations of the adhesive strength does not change.Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 689–700, November–December, 1999.     

Stress State of Multilayer Structural Elements Subjected to Static Loading and Optimization of Laminated Beams and Bars

The results of FEM investigation of the triaxial stress state in multilayer structural elements subjected to axial and bending loads are presented. The distribution regularities of the stiffness and stresses or strains depending on the geometric and mechanical characteristics of layers and their position in the cross section of beams and bars are examined. The optimization of these elements is carried out using the dependences of the Bareisis—Paulauskas method and the Optim-98 computer program created by the present authors. As the optimization criteria, the strength, stiffness, mass, and cost of the structural elements are considered.     

Changes in ADC caused by tensile loading of rabbit achilles tendon: evidence for water transport

Water diffusion measurements were performed on rabbit Achilles tendons during static tensile loading and tendons in an unloaded state. The apparent diffusion coefficient (ADC) was measured along two directions: parallel and perpendicular to the long axis of the tendon. Tendons were studied after being prepared in two ways: (a) after being stored frozen in phosphate-buffered saline (PBS) and (b) freshly isolated. Statistically significant directional anisotropy was observed in the ADC in all tendons. The ADC was significantly greater in the direction parallel to the long axis of the tendon than in the perpendicular direction. The anisotropy is attributed to the greater restrictions seen by the water molecules in the perpendicular direction and is consistent with the known geometry of the tendon. Storage in PBS caused tendons to swell. This increased the ADC measured along both directions and reduced the anisotropy. The existence of anisotropy in the ADC was not related to the orientation of the specimen in the magnet. The ADC increased along both directions following the application of a 5-N tensile load; the increase was greatest along the perpendicular axis of the tendon. In order to determine whether load-related changes in the ADC reflected changes in interfibrilar spacing, we used electron microscopy to measure load-related changes in fibril spacing. Load-related changes in fiber spacing could not account for the observed changes in the ADC. The increase in ADC caused by loading was attributed to the extrusion of tendon water into a bulk phase along the outside surface of the tendon. In PBS-stored samples, enough fluid was extruded that it could be visualized. The transient response of the ADC to a 5-N tensile load was also studied. The absolute ADC in both directions increased with loading and recovered to baseline upon unloading. The transient changes in ADC, for both loading and unloading, had a mean time constant of approximately 15 min. The magnitude of the load-induced transient ADC changes was comparable to that seen in the static-loading experiments.     

HCSB-DEMO�������������ȷ�����������

根据HCSB-DEMO堆的设计要求,对不同尺寸的聚变堆能产生的聚变功率、中子壁负载和等离子体燃烧时间等进行计算与分析,给出了符合设计要求的堆芯参数。在所选定的堆芯参数条件下进行了零维功率平衡计算分析,给出了3组HCSB-DEMO堆的等离子体初步设计参数。