Novel polyester/SiO2 nanocomposite membranes: Synthesis,properties and morphological studies

In this paper, a new type of soluble polyester/silica (PE/SiO₂) hybrid was prepared by the ultrasonic irradiation process. The coupling agent γ-glycidyloxypropyltrimethoxysilane (GOTMS) was chosen to enhance the compatibility between the polyester (PE) and silica (SiO₂). Furthermore, the effects of the coupling agent on the morphologies and properties of the PE/SiO₂ hybrids were investigated using UV-vis and FT-IR spectroscopies and FE-SEM. The densities and solubilities of the PE/SiO₂ hybrids were also measured. The results show that the size of the silica particle was markedly reduced by the introduction of the coupling agent, which made the PE/SiO₂ hybrid films become transparent. Furthermore, thermal stability, residual solvent in the membrane film and structural ruination of membranes were analyzed by thermal gravimetric analysis (TGA). The effects of SiO₂ nanoparticles on the glass transition temperature (T_g) of the prepared nanocomposites were studied by differential scanning calorimetry (DSC). Moreover, their mechanical properties were also characterized. It can be observed that the Young's moduli (E) of the hybrid films increase linearly with the silica content. The results obtained from gas permeation experiments with a constant pressure setup showed that adding SiO₂ nanoparticles to the polymeric membrane structure increased the permeability of the membranes.     

Distorted wave response of ultrasonic annular stator incorporating non-uniform geometry

The traveling wave ultrasonic stator is normally fabricated with teeth. The tooth geometry improves the driving speed, but it creates natural frequency splitting and mode contamination, especially a distorted traveling wave. A dynamic model of a stepped-plate periodic stator is developed to examine the distortion. The stator is treated as an annular supported by a thin mid plate, and the support stiffness is formulated by using equivalent energy principle. The effects of the tooth and mid plate on the natural frequency and vibration mode are examined by using the perturbation method. The rules governing the frequency splitting, frequency perturbation as well as mode contamination are also identified. The traveling wave response and elliptical trace on stator surface are obtained by using the mode superposition method and they are proved to be distorted due to the tooth geometry. The response at the repeated doublets becomes coupled forward and backward traveling waves, but that at the split doublets becomes coupled forward traveling, standing and backward traveling waves. The results indicate that the tooth mass instead of the stiffness decreases the vibration amplitude and driving speed of the dominant wave, but their effects are different at the repeated and split doublets. Inspection of the model implies that the distortion can be suppressed by using a suitable combination of the wavenumber, tooth count, tooth height and occupying fraction. Numerical calculations are carried out to demonstrate the tooth geometry effect on the transient waveform, driving speed and elliptical trace. The optimization of the tooth geometry that can help achieve a purer traveling wave is discussed.     

Application of a hybrid meshless technique for natural frequencies analysis in functionally graded thick hollow cylinder subjected to suddenly thermal loading

A hybrid meshless technique based on composition of meshless local Petrov–Galerkin method (for spatial variables) and Newmark finite difference method (for time domain) is developed for natural frequencies analysis of thick cylinder made of functionally graded materials (FGMs). The FG cylinder is assumed to be under suddenly thermal loading, axisymmetric and plane strain conditions. The dynamic behaviors and time history of displacements are obtained in time domain using Green–Naghdi (GN) theory of coupled thermo-elasticity (without energy dissipation). Using fast Fourier transform (FFT) technique, the displacements are transferred to frequency domain and all natural frequencies are illustrated for various grading patterns of FGMs. The variations of mechanical properties in FG thick hollow cylinder are considered to be in nonlinear volume fraction law through radial direction. The presented hybrid meshless technique furnishes a ground to analyze the effects of various grading patterns of FGMs on natural frequencies, which are obtained employing GN coupled thermo-elasticity governing equations. Also, the frequency history and natural frequencies are illustrated for various grading patterns at several points across thickness of cylinder.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

Effect of ultrasound on the synthesis of low-modulus zeolites from a metakaolin

It was studied the effect of ultrasonic processing (22 kHz) of the aqueous suspension of metakaolin, sodium hydroxide and alumina with a molar ratio 2Al₂Si₂O₇:12NaOH:2Al₂O₃ on the low-modulus zeolite synthesis processes. To investigate the XRD, SEM, IR, EDS had been used. It was shown that after ultrasonic processing, sodium aluminates are formed, what leads to a change in process of further synthesis. It was found that without ultrasonic processing on the stage of thermal treatment at 650 °C, SOD zeolite (|Na₆|[Al₆Si₆O₂₄]) and sodium aluminosilicate (Na₆Al₄Si₄O₁₇) are synthesized. In the sample after ultrasound during thermal treatment, only sodium aluminosilicates of cubic syngony (Na₆Al₄Si₄O₁₇ and Na₈Al₄Si₄O₁₈) are formed. It was demonstrated that sodium aluminosilicates are precursors for the formation of LTA zeolite (|Na₁₂|[Al₁₂Si₁₂O₄₈]). As a result zeolitization of sodium aluminosilicates after the hydrothermal crystallization in alkaline solution, the sonicated sample contained 97 wt% LTA. Without ultrasonic processing, the product of synthesis contained 50 wt% SOD and 40 wt% LTA.     

连续臂丛神经阻滞镇痛对断指再植血流动力学影响的研究

目的研究连续臂丛神经阻滞镇痛对断指再植术后再植指血流动力学的影响，探讨其缓解血管痉挛、增加血流量的可行性。方法将60例急诊行断指再植术患者按随机数字表法分为术后连续臂丛神经阻滞镇痛组（CA组）和对照组（NA组），每组30例。观察两组患者再植指术后血管痉挛、血管栓塞和指体坏死发生例数并计算再植指成活率，记录两组术后即刻（T1）、术后24h（T2）再植指固有动脉血流动力学参数及动脉内径（AD）、远指端血氧饱和度（SpO2）和温度（Ts）变化。结果断指再植术后成活率CA组高于NA组，血管痉挛、血管栓塞和指体坏死发生率CA组均低于NA组，差异均有统计学意义（均P＜0.05）。在T2时CA组各项血流动力学参数、AD、SpO2、Ts均高于NA组，阻力指数（RI）低于NA组，差异均有统计学意义（均P＜0.05）。结论术后连续臂丛神经阻滞镇痛可以缓解再植指固有动脉痉挛，增加指体血流量，提高了断指再植的成功率。     

Recovery performance and characteristics in shape memory effects of aliphatic polyether urethane

The analysis on the recovery performance and characteristics in shape memory effects is helpful for the optimal design and engineering applications of shape memory polymers and their composites. To investigate the relationships among recovery performance, material parameters, and loading conditions, by taking aliphatic polyether urethane as an example, the researchers simulate the shape memory behaviors numerically using a three‐dimensional viscoelastic model. The material parameters for this model are taken from stress relaxation tests, rather than dynamic mechanical analysis tests. Both the unconstrained and the constrained recovery behaviors during strain‐controlled shape memory processes are analyzed. The results reveal that the unconstrained recovery occurs at the same temperature regardless of the applied strain values. Another interesting result is that the shape recovery temperature in unconstrained recovery situations increases and the maximum recovery stress under constrained recovery conditions decreases with the increase of heating rates. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of Pd,Rh, Pt,Au in road dust by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g⁻¹ for Pd, Rh, Pt and Au, respectively, in original dust samples.     

Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.