GC-MS法测定焦化厂气溶胶中多环芳烃

利用气相色谱-质谱(GC-MS),电子轰击离子化(EI)法测定焦化厂气溶胶中多环芳烃的含量。超声波抽提气溶胶样品,用GC-MS的选择离子监测(SIM)方式测定EPA提出的优先监测的16种多环芳烃的含量。该法的检出限为0.167pg·m~(-3),PAHs的回收率为85.1％～110.5％,相对标准偏差为4.62％～19.4％。应用该法测定气溶胶中PAHs获得满意的结果。     

Gel permeation chromatographic characterization of sodium hyaluronate and its fractions prepared by ultrasonic degradation

Summary High-molecular-weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. The molecular weight of hyaluronate and its polydispersity was determined by gel-permeation chromatography. During 75-min treatment the molecular weight value decreased from 1.39×10⁶ Da to 2.25×10⁵ Da while the polydispersity of the molecular weight increased from 1.29 to 2.36. The reciprocal value of the square of the hyaluronate's molecular weight was linearly proportional to the time of ultrasonication.     

Size exclusion chromatographic characterization of sodium hyaluronate fractions prepared by high energetic sonication

Summary A high molecular weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. High-performance size exclusion chromatography allowed rapid and accurate determination of molecular weight parameters (M_z, M_w, M_n) and distributions. The time dependence of hyaluronan ultrasonication to the molecular characteristics of the polymer was investigated. A non-random nature of the degradation process was demonstrated and the reciprocal M_n value was found to be linearly proportional to the time of ultrasonication.     

Trace determination of nitrated polycyclic aromatic hydrocarbons using liquid chromatography with on-line electrochemical reduction and fluorescence detection

An efficient clean-up procedure coupled with a high performance liquid chromatography (HPLC) with on-line electrochemical (EC) reduction and fluorescence detection (FLD) was developed to quantify nitrated polycyclic aromatic hydrocarbons (NPAHs) in the airborne particulate. In this process, NPAHs were extracted ultrasonically followed by analysis by using a reversed phase column with an aqueous eluent containing 70% aqueous acetonitrile and sodium monocholoroacetate as a buffer solution. The extraction efficiencies were above 83% for 1-nitropyrene and 1,3-dinitropyrene (1,3-DNP) 1,6-DNP, and 1,8-DNP, and calibration graphs were linear with very good correlation coefficients (r>0.999) and the detection limits were in the range of 1.0-2.2 pg for dinitropyrenes and nitropyrene. The proposed method provides a relatively simple and convenient procedure for determining the NPAHs samples in airborne particulate.     

羧甲基纤维素系列高分子表面活性剂超声合成的研究

研究了在超声波作用下羧甲基纤维素的降解反应及ＣＭＣ与具有不同亲水亲油比值的活性大单体「烷基醇（酚）聚氧乙烯醚丙烯酸酯及第三单体」的超声共聚反应。经萃取提纯的共聚产物用ＩＲ，＾１３Ｃ ＮＭＲ和ＵＶ等方法进行表证，证实通过超声反应制得了二元和三元共聚物。     

高活性钛镀铂电极

在电沉积过程中采用超声波振荡技术，选择最佳条件可制备牢固高活性然镀铂电极，超声波振荡技术改善他镀层与基底的粘结力。电极活性与双层电容有关，并旭因于表面粗糙度。     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

Ultrasonic and Raman Scattering Spectroscopy of Zinc Thiocyanate Complexes in Water at 25<Superscript>∘</Superscript>C: Kinetics of Complex Formation Determined by Multivariate Analysis

Advances have been made recently in broadening the accessible ultrasonic absorption frequency range and improving the detectability of minor species present in solution using Raman spectroscopy. Development of chemometric techniques in these areas needs to keep pace with the improvement of these experimental methods. Refinements in the analysis of ultrasonic and Raman data based on multivariable least squares and factor analysis, respectively, are examined to investigate the kinetics of zinc thiocyanate complex formation in water. Analysis of ultrasonic absorption relaxation spectra verified that the observed process in aqueous Zn(SCN)₂ involves substitution of water from the first coordination shell of Zn²⁺. Use of a multivariable least-squares error surface is described that enhances the reliability of assigned frequencies of ultrasonic absorption maxima. Factor analysis of Raman scattering data provided direct evidence that at least four complex species, such as Zn(SCN)⁺ and Zn(SCN)₂, are simultaneously present in the aqueous zinc thiocyanate solutions.     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.     

Static ultrasonic oscillations induced degradation and its effect on the linear rheological behavior of novel propylene based plastomer melts

The ultrasonic degradation of novel propylene based plastomer (DP) melts with different melt viscosities was conducted in a “static” ultrasonic device where the samples were taken from various distances from the tip of an ultrasonic probe. The effects of ultrasonic time, oscillation temperature, ultrasonic intensity and the distance from the ultrasonic probe tip on the degradation behavior of DP melts as well as the ultrasonic degradation effect on the linear rheological behavior of DP melts were studied. The results show that the increase of initial melt viscosity of DP (higher molecular weight) has greater impact on the ultrasonic degradation of DP melt. The molecular weight and intrinsic viscosity of DP decrease with the increase of ultrasonic oscillation time and they approach to a limiting value. The molecular weight distribution of DP increases after ultrasonic degradation. Decreasing oscillation temperature and distance from probe tip and increasing ultrasonic intensity lead to an increase in the degradation of DP melt. The linear rheological behavior measurements of the samples obtained near the ultrasonic probe tip show that ultrasonic oscillations decrease the complex viscosity, zero shear viscosity, viscoelastic moduli, cross modulus, relaxation time and the slope of log G′ − log G″ for DP melts.