Comparative study of corona discharge simulation techniques for electrode configurations inducing non-uniform electric fields

Numerical modeling of corona discharges has followed the same set of procedures for many years. Corona discharges on large scales are modeled only for ion drift, neglecting ionization. Studies of the ionization zone are often conducted in uniform axisymmetric configurations. However, in configurations that induce non-uniform electric fields, a combination of the two procedures is necessary to accurately capture the discharge physics and ion distribution. The present study conducts numerical simulations of a wire-cylinder corona using both the models and demonstrates the necessity of including the ionization physics to obtain improved accuracy, particularly in the presence of non-uniform electric fields.     

Corona discharge in electrospraying

The paper presents investigations of current–voltage and light emission characteristics of electrospraying of various liquids in atmospheric air. The spectroscopic measurements have shown that the onset of corona discharge coincides with the onset of electrospraying, with the voltage increasing. The emission intensity in selected spectral lines during electrospraying depends on spraying mode, discharge power and a kind of liquid. In the specific experimental conditions in air, mainly the N₂ second positive system, which is visible as violet faint light, has been recorded. The emission intensity of other gaseous species, which could be product of electrosprayed molecules decomposition or dissociation, was at very low level for the voltages applied, i.e., for glow or onset streamer discharges. From the measured light emission spectra of discharges from capillary nozzle and liquid jet, the dependence of the amplitude of selected spectral lines on capillary-nozzle voltage has been determined and it was found that this relation can be approximated by a third-degree polynomial function. This approximation has been supported by theoretical considerations. The presented results support the hypothesis that faint electrical discharges (glow, onset streamers) usually occur during and are inherent to electrospraying.     

非链式HF/DF激光器的研究进展

HF/DF激光器是中红外波段能提供最高能量输出的激光光源,也是中红外波段应用非常广泛的相干光源。本文介绍了近几年国内外关于非链式HF/DF激光器的研究进展及其成果应用,分析了非链式HF/DF激光器在应用方面的优缺点,总结了实现非链式HF/DF激光输出的关键技术和存在的问题,指出了该技术的未来发展方向。     

氟化氙(C-A蓝绿激光技术研究进展

 综述了XeF(C-A)激光的产生原理，表面放电光泵浦源的结构，激光器装置， XeF(C-A)激光实验研究以及XeF(C-A)激光理论模拟；介绍了XeF₂浓度的监测，以及表面放电光泵浦源技术研究的最新进展。     

水中脉冲放电的电特性与声辐射特性研究

对水中脉冲放电等离子体通道电阻与放电参数之间的关系作了研究,得到了等离子体通道电阻与电容量、初始电压、电极间距离的关系,以及通道电阻随时间的变化规律.还对冲击波的峰值压力与放电参数间的关系作了研究,并对冲击波压力的功率谱作了分析,结果表明水中脉冲放电所产生的冲击波的声辐射频率在几十赫兹到几万赫兹之间,覆盖了所有水声设备的工作频率,且在低频段具有很强的声功率,是一种理想的水下声源 关键词： 水中脉冲放电 等离子体     

Enhancement of the electric field threshold for microwave breakdown by crossed magnetic field

The enhancement of breakdown threshold is of benefit to the high power microwave transmission. We propose a magnetic field in the transverse direction to the electric field to enhance the breakdown threshold. A theory of electric field threshold with crossed magnetic field for short pulse is developed, and verified by particle-in-cell/Monte Carlo collision (PIC/MCC) simulations. The result shows that the crossed magnetic field can enhance the breakdown threshold significantly.     

倾斜直流场下的介质板击穿统计分析

传统分析介质板次级电子倍增问题的粒子追踪算法方法存在运算耗时长、运算量大等缺点,为此采用统计方法实现了倾斜强直流场下介质击穿过程中次级电子倍增效应的数值模拟,给出了击穿过程中电子数量,电子渡越时间等关键参数的时间图像,同时研究了倾斜角、介质表面光滑度和次级电子产生率对次级电子倍增效应的影响。研究结果表明：强直流场下的次级电子倍增效应存在倾斜角的区域,倾斜角太大或者太小,都可能不会发生次级电子倍增效应,如果倾斜角位于区域内,则饱和状态时电子数目随着倾斜角度的变大而变小;选取光滑系数和次级电子产生系数越小的介质材料,抑制次级电子倍增效应的效果越好。     

短管螺旋波放电中等离子体参数测量和模式转化研究

对长度为45 cm的短放电管螺旋波放电等离子体进行了Langmuir探针、原子发射光谱以及集成电荷耦合检测器(ICCD)检测诊断,研究螺旋波等离子体的放电特性.Langmuir探针数据显示电子密度在射频功率增加过程中出现两次大幅增长,由此确认了放电模式的转换及螺旋波放电模式的出现.发射光谱测量结果与Langmuir探针测量的电子密度数据一致,发现Ar原子和Ar离子的谱线强度与放电模式变化有着密切相关性.而通过对不同放电模式的ICCD测量,获得射频功率吸收因放电模式转变而变化的方式,认为放电模式转换时电子行为和能量传递方式也发生着变化.     

线-铝箔电极电晕放电激励器的推力理论与实验研究

空气电晕放电离子风激励器无需旋转部件, 仅通过消耗电能就能直接产生驱动力, 它是一种新型的动力技术, 备受国内外航空航天界的广泛关注. 目前对空气电晕放电离子风激励器的推力产生机理虽有各种解释, 但是现有理论均不能统一各种条件下的实验结果, 仍需要开展进一步的分析与研究. 本文以线-铝箔电极电晕放电激励器为研究对象, 通过实验研究发现作用在线电极与铝箔电极上的静电力不对称, 而且改变铝箔电极纵向高度和气压均能影响激励器的推力大小; 通过理论分析, 考虑电晕层与空间电荷的影响, 建立了线-铝箔电极电晕放电激励器的推力计算模型, 其计算值与实测值比较一致. 基于上述实验现象与理论建模分析, 本文认为线-铝箔电极电晕放电激励器的推力主要来源于线电极电晕产生的空间电荷对电极系统产生了不对称静电力作用, 使激励器出现净静电力作用.     

基于RTW的双向充放电机实时控制技术

随着智能电网和绿色能源技术的快速发展,双向充放电机也越来越受到关注;文章主要研究双向充放电机充电过程中电压的稳定性和放电过程中并网电流波形的畸变率;提出了一种基于RTW的matlab/simulink控制方法,在simulink环境下搭建仿真模型和控制模型,然后将达到预期效果的仿真模型所对应的控制模型编译为代码并烧写到DSP中;此种方法在能够保证在恒流源和恒压源两种充电模式中电流和电压的稳定性,在放电过程中并网谐波电流总畸变率小于5%,功率因数基本为1;仿真结果和基于DSP2812的硬件平台实验都证明了这种方法的有效性。