Effect of relative humidity on current–voltage characteristics of monopolar DC wire-to-plane system

This paper deals with the DC monopolar corona discharge in wire-to-plane geometry under variable humid air conditions. The classical formulas of Townsend commonly used for the current–voltage characteristics were used to determine the various corona parameters for the both polarities of the corona discharge. A circular biased probe has been adapted to the plane and is used to measure the ground plane current density and electric field during the monopolar corona discharge. A new approach to the problem of corona discharge in transmission system has been described in this paper. The effect of varying the humidity and wires diameter is also investigated. The values of the electric field and the current density are maximum beneath the corona wire and decrease when moving away from them and the current–voltage characteristics follow the quadratic Townsend's law. The experimental results show that the monopolar corona discharge is strongly affected by the air humidity. The current density and the electric field are measured and compared with the computed values. The agreement between the calculated values and those obtained experimentally is satisfactory. The per unit electric field and current density are also represented by a unique function.     

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Ozone (O₃) generation in a dielectric barrier discharge (DBD) reactor driven by a pulsed power supply was investigated at atmospheric pressure and room temperature. An O₃ generation efficiency model is established in which discharge power, O₂ concentration, gas flow rate, and volume of the discharge space are included. Constants in the O₃ generation efficiency model were obtained by fitting the model with experiment results. O₃ concentration can be simply calculated from the energy density and initial O₂ concentration. Comparison on O₃ concentrations from calculation with references is given.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

Micro-arc ignition on the oily surface of capacitively-coupled plasma

Micro-arc ignition on the oily surface is investigated in a capacitively-coupled plasma (CCP) system. In this system, micro-arc generation is enhanced by increased level of plasma potential, which is induced by a DC-grounded coil between blocking capacitor and the powered electrode. The images of micro-arcs are captured with very short exposure time of 20 μs using intensified charge-coupled device triggered by a high speed comparator and the focused ground electrode is partially soiled with oil. The micro-arcs are observed only on the oily surface of the electrode. This observation provides that the oily surface of CCP is very weak for micro-arc ignition and micro-arc ignition is supposed to be enhanced by the oil evaporation and the thin oil layer, considering the RF Paschen breakdown of the oil vapor within the sheath and the dielectric breakdown of thin oil layer.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

用浓度调制光谱法测量水汽辉光放电中OH和H2O的布居数变化

本文使用波长为2.8 μm的分布式反馈激光器来测量水汽辉光放电产生的物种. 使用浓度调制光谱仅观察到OH自由基和瞬态H₂O分子的吸收光谱. 吸收峰的强度和方向随解调相位而变化,但是H₂O的一个吸收峰的方向始终与其它峰相反. OH和H₂O的不同光谱取向反映了能级中粒子数量的增加或减少. 如果在放电过程中可以检测到更多的瞬态物种,则可以更好地研究H₂O的激发、电离和分解动力学. 研究表明,浓度调制光谱的解调相位关系可以用来研究分子能级的布居数变化.     

Magnetically Enhanced 15 kHz Glow Discharge of Methane

This work deals with the luminous chemical vapour deposition (plasma polymerization) of hydrocarbon polymeric thin films in a magnetic field enhanced discharge of methane. The films were deposited on 4″ <111> single crystal silicon substrates. We investigated the influence of the different glow discharge parameters (e.g. pressure, flow rate, power input, etc.) on the deposition rate of methane and the refractive index of the resulting polymeric films, as well as the distribution of these parameters across the wafer. We used a Shinko Seiki Plasma Polymerization equipment with a bell jar reactor comprising two electrodes connected to a symmetric AC power supply of 15 kHz. Two magnetrons were formed by placing two circular shaped concentric magnetic poles behind each electrode. The substrates were attached on both sides of a rotating wheel held at a floating potential in the middle of the two electrodes. This equipment allowed us to vary a single parameter and keep the other parameters constant over the whole process. We measured the thickness and the refractive index and their distribution over the wafer. The effect of the system pressure, decoupled from the effect of flow rate, is explained by the characteristic nature of luminous gas phase and by the polymerization/deposition mechanism of luminous chemical vapour deposition.     

Partially crystallized Pd nanoparticles decorated TiO2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.     

�����װ�õĻԹ�ŵ�����

在四阳极直流放电装置上,测量并分析了辉光放电的电流-电压和发光特征随气压的变化关系。结果表明,采用稳流放电模式比稳压放电具有更宽的稳定放电气压和电流范围,能在从1～800Pa的较宽气压范围内实现氦气辉光放电,放电电流可达到500mA左右。随着电极表面亮斑的变化,对于同一气压,在低电流区,放电电压几乎成指数增长;随电流增大,电压的增长速度变缓;对于高的气压,碰撞频率的增大使得电压随电流升高的速率变小。分析表明,放电处于异常辉光区。从放电管的CCD图像可以看出,对于同一放电电流,随气压的升高,等离子体往阴极收缩。     

多通道表面放电光泵浦源触发特性研究

介绍了多通道表面放电光泵浦源的设计,理论分析了触发电压幅值及上升时间、绝缘基板厚度等参数对所设计光泵浦源触发特性的影响。分析表明：在触发电压作用下,通道两电极处电场出现强烈畸变,而通道中间电场基本为零。采用高速相机拍摄泵浦源的放电图像以及电流线圈测量各通道的放电电流这两种方法实验研究了泵浦源的同步性及放电均匀性。当氮氩混合气体总气压为0.1 MPa (氮氩体积比为3∶7),充电电压20 kV,触发电压30 kV,前沿约10 ns时,成功实现了10通道均匀放电,抖动约20 ns。实验结果表明：在保证放电装置绝缘良好的情况下,若充电电压和触发电压越高,触发电压上升时间越短,触发电极至通道的有效距离越短,则多通道放电的抖动就越小,放电均匀性越好。