30GHz RF脉冲压缩器设计

 为得到脉宽150ns，功率超过100MW的30GHz微波脉冲，采用MSLED-II原理设计了30GHz RF-脉冲压缩器。H-Hybrid，TE₁₀0^口-TE₁₀^o模式转换器等器件都采用了新型设计，所有微波器件的设计充分考虑了高功率下的适用性，没有容易引起打火的调谐杆、容性膜片等部件。在微波器件的设计中用HFSS软件进行了详尽的模拟。加工并测试了H-Hybrid，且用在CERN的RF脉冲展宽器上。     

双级制冷压缩机配置的节能优化

通过对国产典型产品比较发现,双级螺杆式压缩机COP值高于双级活塞式压缩机。在-35℃/35℃典型工况下,平均COP值高11.4%,最大增加了18.3%。实例分析表明,不同方案配置的电机功率差别很大。活塞机比螺杆机方案电机总功率明显偏大,平均大20%,差别最大的总功率增加了42%。因此,在制冷系统设计选型阶段,应对压缩机不同选型方案COP及电机功率进行优化,应认真核算实际需要的电机功率。对于年运行≥3000小时的系统,应选用Y2-E或者YX系列高效节能型电动机。     

The effect of HCP on the formation of twin boundaries and dislocations in Ni–Co alloys

In this study, molecular dynamics (MD) was used to simulate the rapid solidification process of Ni₄₇Co₅₃ and Ni₄₈Co₅₂ alloys at a cooling rate of 10¹² K/s. The effects of HCP on the formation of twin boundaries and dislocations in two Ni–Co alloys are studied. It is found that the difference of HCP clusters is the main effect that producing discrepancies on microstructure of two alloys. The number of HCP clusters accounted for 9.23% in Ni₄₇Co₅₃ alloy. They are regularly arranged to form the number of single-layer twin boundaries, and each twin boundary ends in a dislocation. The FCC and HCP structures coexist in the same atomic layers, which is easy to create dislocations. The relatively standard FCC crystal and only 0.32% HCP clusters are formed in Ni₄₈Co₅₂ alloy at 300 K. That small amount of HCP clusters are dispersed on the surface, and cause the formation of dislocation in the border with FCC clusters.     

The interaction between a screw dislocation and an interfacial cruciform crack and collinear linear cracks

The interaction between a screw dislocation and an interfacial cruciform crack and collinear linear cracks under loads at infinity was investigated. General solutions of complex potentials to this problem were derived by using complex potential theory. As illustrative examples, the closed form solution for a screw dislocation interacting with an interfacial cruciform crack and a linear crack is obtained. The stress intensity factor and critical stress intensity factor for dislocation emission are also calculated. The results show that the shielding effect increases with the increase of the shear modulus and the distance between the two cracks, but it decreases with the increase of dislocation azimuth and the distance between the dislocation and the cruciform crack tip. The critical loads at infinity for dislocation emission increase with the increment of the emission angle, the distance the two cracks and the vertical length of the cruciform crack.     

Which stresses affect the glide of screw dislocations in bcc metals?

By direct application of stress in molecular statics calculations we identify the stress components that affect the glide of 1/2?111? screw dislocations in bcc tungsten. These results prove that the hydrostatic stress and the normal stress parallel to the dislocation line do not play any role in the dislocation glide. Therefore, the Peierls stress of the dislocation cannot depend directly on the remaining two normal stresses that are perpendicular to the dislocation but, instead, on their combination that causes an equibiaxial tension-compression (and thus shear) in the plane perpendicular to the dislocation line. The Peierls stress of 1/2?111? screw dislocations then depends only on the orientation of the plane in which the shear stress parallel to the Burgers vector is applied and on the magnitude and orientation of the shear stress perpendicular to the slip direction.     

压缩系数可控的光脉冲压缩器

提出了一种压缩系数可控的光脉冲压缩器.该脉冲压缩器主体包括梳状色散分布光纤（CDPF）和喇曼放大器两部分.梳状色散分布光纤由多段色散位移光纤和单模光纤拼接而成,具有喇曼增益介质的功能.对一给定的光脉冲序列,可以通过控制泵浦功率实现脉冲压缩器的压缩率可调.通过对非线性薛定锷方程的数值模拟,这一光脉冲压缩器的性能得到了验证.当光脉冲在CDPF中传输时,脉冲得到压缩并且被放大.对喇曼泵浦功率来改变可以得到不同的输出脉宽.通过优化CDPF的结构,得到了喇曼泵浦功率和压缩系数之间很好的线性关系.     

多级轴流压气机全工况特性计算

本文使用三维粘性流动计算软件Fine／Numeca,对某十五级轴流压气机进行了内流流场和全工况特性的数值计算尝试。分析了该压气机在设计工况和非设计工况的性能,同时把整机计算结果和前七级叶片的计算结果进行了比较。计算结果表明,当计算的级数较少时,目前的软件和硬件平台可以比较合理地预测压气机的全工况特性;而当计算的级数较多时,准确的数值模拟仍需要更为准确的多级模型和数值方法。     

压气机非定常叶顶间隙流的数值模拟研究

利用数值方法研究了某低速轴流孤立压气机转子中非定常叶顶间隙流的流动特征和频率特性。结果显示转子顶部区域的压力脉动主要来源于叶顶泄漏涡的非定常波动。波动的具体形式表现为泄漏涡瞬态空间位置、尺度和形态的周期性变化,波动频率为1266 Hz。     

风扇/增压级非设计工况特性分析

本文对某涡扇发动机风扇-外涵道-内涵道整体进行三维定常数值模拟,对内外涵道在设计转速下的流量特性和非设计工况下的气动性能进行了分析。得到内外涵道的稳定工作区域以及在内外涵道堵塞和近失速点的流场信息,为风扇／增压级整体结构的性能评估和优化设计提供了一定的依据。     

进气畸变对压气机稳定性的影响

在低速大尺寸单级压气机实验器上,实验研究了动态进气畸变对压气机稳定边界的影响。并采取在静子叶片表面埋入微型压力传感器的方法,分析了压气机流场的动态压力特性。实验结果表明,动态总压畸变的旋转频率和旋转方向对压气机稳定性有很大的影响,当畸变相对转速n在0~+0．5之间时,压气机失速推迟;分析动态压力的频谱特性后知道,在压气机失速前一般存在与失速相关的压力扰动,动态总压畸变影响这种压力扰动,从而影响压气机的不稳定流动状态。