Inductively coupled plasma atomic emission spectrometry — Optimization of the operating conditions in the determination of trace of elements in line-rich emission matrices

Radial viewing 40.68 MHz inductively coupled plasma atomic emission spectrometer was used in the determination of Y, Sc and rare earth elements in Eu₂O₃ or Lu₂O₃ as pure rare earth matrices. The Mg II 280.270 nm/Mg I 285.213 nm line intensity ratio was measured to evaluate the robustness of the operating conditions. The operating conditions were affected by varying the incident power and sheathing gas flow rate. The carrier gas flow rate remained a constant value. The relationship between the Mg II 280.270 nm/Mg I 285.213 nm ratio and the excitation temperature was obtained. A dependence of the magnesium ratio in the pure solvent and the corresponding values in the presence of the above matrices was established.     

The use of carbon nanofibers microcolumn preconcentration for inductively coupled plasma mass spectrometry determination of Mn,Co and Ni

Based on carbon nanofibers (CNFs) as a solid phase extraction adsorbent, a microcolumn preconcentration method coupled to inductively coupled plasma mass spectrometry (ICP–MS) was developed for the determination of trace elements (Mn, Co and Ni). The effect of various experimental parameters such as pH, sample flow rate and volume, elution solution and interfering ions on the retention of the studied ions have been investigated systematically. During all the steps of the experimental process, Mn, Co and Ni could be quantitatively sorbed on the microcolumn containing CNFs in the range of pH 6.0–9.0, and then eluted completely with 0.5 mol ml^− 1 HNO₃. A preconcentration factor of 150-fold was obtained. The detection limits for Mn, Co and Ni were 40, 0.4 and 8.0 pg ml^− 1, respectively, with relative standard deviations less than 6.0%. In order to validate the proposed method, two certified reference materials of human hair (GBW 07601) and mussel (GBW 08571), and water sample were analyzed with satisfactory results. The recoveries were between 95.0 and 114%.     

Comparison of adsorbents for on-line solid-phase extraction of polycyclic aromatic hydrocarbons before liquid chromatography with UV detection

Summary On-line solid-phase extraction (SPE) coupled with reversed-phase liquid chromatography and UV detection at 254 nm has been used for the determination of trace-level polycyclic aromatic hydrocarbons (PAH) in soil extracts. Five commercially available adsorbents (C₈, C₁₈, PLRP-S, PRP-1, and Bond-Elut Env) were evaluated. Results showed that recovery of the PAH decreased with increasing molecular weight, because of their poorer solubility. Recovery of high-molecular-weight PAH was significantly improved by addition of 10% (v/v) acetonitrile to the sample before loading of the SPE adsorbent. PAH recovery ranged from 64.0 to 108% when a 50 mL sample spiked with 1 μg L⁻¹ was applied to these adsorbents. Determination of PAH was possible with detection limits below 0.05 μg L⁻¹, which corresponds to 0.2 μg kg⁻¹ soil. The method was successfully used to determine PAH in soil extracts.     

The role of various binding materials for trace elemental analysis of powder samples using laser-induced breakdown spectroscopy

Study of various binding materials like potassium bromide, poly(vinyl alcohol), starch, silver and aluminum has been carried out using laser-induced breakdown spectroscopy (LIBS). The role of matrix effects using these five binders on LIBS signal intensity was investigated for better performance of LIBS technique as a quantitative analytical tool. For comparative study of different binders, the signal intensity of different Mg lines at 518.3, 517.2, 383.8 and 279.5 nm wavelengths were recorded for pellets prepared with known concentrations of Mg in these binders. The influence of laser energy on ablated mass under different binding materials and its correlation with LIBS signal intensity has been explored. Optical scanning microscopy images of the ablated crater were studied to understand the laser ablation process. The study revealed that the binding material plays an important role in the generation of LIBS signal. The relative signal intensity measured for a standard Mg line (at 518.3 nm) were 735, 538, 387, 227 and 130 for potassium bromide, starch, poly(vinyl alcohol), silver and aluminum as binders, respectively. This indicates clearly that potassium bromide is better as a binder for LIBS studies of powder samples.     

丙烯中微量硫的测定

本文采用燃烧方法将不同形式的可燃性硫转化为SO2，在硝酸介质中用H2O2将SO2氧化为SO4^2-，并用离子色谱法测定。结果表明，该法样品处理简单，干扰离子少，灵敏度高，能较准确测定出丙烯中的微量硫。     

血橙中微量元素的测定

采用电感耦合等离子体原子发射光谱仪(ICP-AES),对血橙果肉汁、皮、籽中10种微量元素进行了测定。结果表明,血橙果肉汁、皮、籽中含有Ca、Mg、Fe、Zn、Mn、Cu、Ni等丰富的人体必需微量元素,且血橙果皮、籽中的微量元素含量普遍高于果肉汁中的微量元素的含量,这为血橙药效功能的进一步研究和资源综合开发利用提供一定的科学依据。     

液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

老年性白内障与微量元素

参阅有关老年性白内障的文献．归纳其病因有四种学说:(1)老化学说;(2)醌体学说;(3)微量元素学说;(4)中医学说．按病因学说不同．用药各异．目前治疗老年性白内障药物有滴眼剂及内服剂,其中有一种新药名为除障灵．它是根据中医学说及微量元素学说，筛选中药制成,它含有丰富的锌、硒、铜、镁等微量元素．应用除障灵治疗老年性白内障患者102例(204只眼)，观察6个月至2年，有效率达95％，开创了治疗老年性白内障的新方法．     

微波消化技术在生物微量元素测定中的应用

用微波消化技术消化了多种食物样品．与传统的干、湿消化法相比，微波消化更加简单、快速、节省、沾污少、损失少、环境污染少．用原子吸收测定样品中的Ｆｅ，Ｃ．Ｖ＜２％，加标回收率为９８％～１００％，测定美国生物标准物质牛肝中的Ｆｅ的相对误差为０．３％，结果令人满意．     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.