Spatiotemporal and Thermal Analysis of VCSEL for Short-range Gigabit Optical Links

High-speed Optoelectronic Modules using Vertical Cavity Surface Emitting Lasers (VCSEL) coupled to Multi Mode Fibers (MMF) are a performing and low-cost solution for 10 Gigabit Ethernet (10 GbE) in short-distance optical links. A complete model of the spatiotemporal behavior of multimode VCSELs, through static and dynamic response, noise, thermal effects, and its coupling to MMF has been investigated. Relative Intensity Noise shows modal dependence and can be affected by spatial filtering due to coupling and fiber propagation. Simulations permit to evaluate critical parameters, such as modulation formats, launching conditions, and operating temperature for global bandwidth and eye diagram optimization up to 10 Gb/s. Simulation results are compared to measurements on prototype optoelectronic modules.     

Planned positron experiments at FRM-II

The new research reactor FRM-II near Munich has a strong positron source, which delivers an intense, nearly monoenergetic positron beam. Our positron systems, the pulsed low energy positron source (PLEPS) and the scanning positron microscope (SPM) will be operated at this beam. Some aspects of matching these systems to the new positron source will be discussed.Considerable improvements are expected, e.g. more than 10⁵ s⁻¹ recorded events at PLEPS and sub-micrometre resolution at SPM. They will enable investigations in so far inaccessible problems like the evaluation of annihilation characteristics and trapping constants of individual defects or studies of fast dynamical processes. In applied materials science complex defect structures will be studied which demand a resolution into many differing lifetimes, e.g. fractured specimens, wear, corrosion, etc. Also large series of measurements at small systematic modifications are planned. There is also the opportunity to analyse in addition the chemical microstructure of the specimens by means of a hydrogen microprobe and other ion beam techniques available close to FRM-II at the Technical University of Munich.     

Development of a RILIS ionisation scheme for gold at ISOLDE, CERN

At the ISOLDE on-line isotope separation facility, the resonance ionisation laser ion source (RILIS) can be used to ionise reaction products as they effuse from the target. The RILIS process of laser step-wise resonance ionisation of atoms in a hot metal cavity provides a highly element selective stage in the preparation of the radioactive ion beam. As a result, the ISOLDE mass separators can provide beams of a chosen isotope with greatly reduced isobaric contamination. With the addition of a new three-step ionisation scheme for gold, the RILIS is now capable of ionising 26 of the elements. The optimal scheme was determined during an extensive study of the atomic energy levels and auto-ionising states of gold, carried out by means of in-source resonance ionisation spectroscopy. Details of the ionisation scheme and a summary of the spectroscopy study are presented.     

An orthotropic plate model for decks of suspension bridges

The main purpose of the present paper is to compare two different kinds of approaches in modeling the deck of a suspension bridge: in the first approach we look at the deck as a rectangular plate and in the second one we look at the deck as a beam for vertical deflections and as a rod for torsional deformations. Throughout this paper we will refer to the model corresponding to the second approach as the beam-rod model. In our discussion, we observe that the beam-rod model contains a larger number of elastic parameters if compared with the isotropic plate model. For this reason the beam-rod model is supposed to be more appropriate to describe the behavior of the deck of a real suspension bridge. A possible strategy to make the plate model more efficient could be to relax the isotropy condition with a more general condition of orthotropy, which is expected to increase the number of elastic parameters. In this new setting, a comparison between the two approaches becomes now possible.Basic results are proved for the suggested problem, from existence and uniqueness of solutions to spectral properties. We suggest realistic values for the elastic parameters thus obtaining with both approaches similar responses in the static and dynamic behavior of the deck. This can be considered as a preliminary article since many work has still to be done with the perspective of formulating models for a complete suspension bridge which take into account not only the deck but also the action on it of cables and hangers. With this perspective, a section is devoted to possible future developments.     

Negative-mass instability at nonsymmetrical perturbations

The negative-mass (space-charge) instability is studied within the model of a flat thin electron beam moving along the stationary uniform magnetic field in the case of nonsymmetrical perturbations. It is shown that due to the phenomenon of "phase mixing" of electron bunches the instability increments are small for perturbations with spatial scales smaller than the Larmor diameter.     

Molecular-beam mass spectrometry of van der Waals clusters. Mass spectrum of hydrogen sulfide dimer

Hydrogen sulfide clusters generated by ultrasonic expansion of an H₂S-Ar mixture into a vacuum were detected by electron impact mass spectrometry. The mass spectrum of the dimer, (H₂S)₂, was obtained under conditions of predominant dimerization. A mechanism of the formation of ions that involves intracluster reactions between the fragment ions of the monomer and the monomer molecule has been suggested.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 839–844, May, 1995.The work was carried out with the financial support of the Russian Foundation for Basic Research (Project No. 93-03-4933). The authors are also grateful to the European Environmental Research Organisation (EERO) for support.     

Heat conduction effects during the calorimetric determination of absorbed dose to water in radiotherapy beams

A transportable water calorimeter for the determination of the quantity of absorbed dose to water in radiotherapy beams has been developed at the PTB and is presented in detail in this investigation. Heat conduction effects occurring in the calorimeter are studied for different lateral sizes of high-energy photon beams, for different depth dose distributions of electron beams and for a scanned-beam irradiation with a heavy ion beam. The corresponding correction factors are calculated and arguments are given under which conditions these can adequately be applied.     

部分相干光在大气湍流中传输的闪烁指数

实验测量了不同空间相干度的部分相干光在实际大气湍流中传输的闪烁指数。结果表明：随着入射光空间相干度的降低,闪烁随光传输距离增长而增加的趋势变得缓慢,甚至出现减小的情况。此外,与完全相干光的闪烁指数随着径向距离的增加而增加不同,部分相干光的闪烁指数沿着光斑径向距离的增加不一定增加,而有可能出现降低。相干度越低,该效应越明显。     

Hybrid and multi-field variational principles for geometrically exact three-dimensional beams

This paper addresses the development of several alternative novel hybrid/multi-field variational formulations of the geometrically exact three-dimensional elastostatic beam boundary-value problem. In the framework of the complementary energy-based formulations, a Legendre transformation is used to introduce the complementary energy density in the variational statements as a function of stresses only. The corresponding variational principles are shown to feature stationarity within the framework of the boundary-value problem. Both weak and linearized weak forms of the principles are presented. The main features of the principles are highlighted, giving special emphasis to their relationships from both theoretical and computational standpoints.     

单链表在离子发动机光学系统粒子模拟中的应用

 目前离子发动机光学系统数值模拟大多采用PIC方法,由于该方法需要跟踪单个粒子的运动,因此需要存储每个粒子的位置信息与运动信息。传统的粒子模拟程序中,保存粒子信息大多采用数组的方式,但是采用这种方式存在弊端,例如对粒子总数变化的自适应不好。基于此开发了一种使用链式存储结构的粒子模拟程序,该程序使用带头节点的单向链表存储粒子信息。使用基于链式存储结构的PIC方法对离子发动机光学系统进行了粒子模拟,验证了链式粒子信息存储方法在粒子模拟中的可用性。模拟表明：（1）在粒子模拟中采用链式存储结构存储粒子信息,无需预先指定最大粒子总数,程序可自适应粒子总数的变化,因此无需进行试算,节省了计算时间;（2）在粒子模拟中采用链式存储结构,由于不存在内存资源的浪费,因而可显著提高程序的存储效率与计算效率。