诊断中性束加速电源打火检测与保护电路的研究与设计

通过检测打火短路过程中产生较大的di/dt 和du/dt 来实现高压电源的打火短路保护。在研究了中性束加速电源控制和保护特点的基础上, 设计了诊断中性束加速电源在打火短路过程中的di/dt 和du/dt 的检测电路和相应的保护电路, 实现提前对加速器高压电源打火短路的保护。     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

Laser spectroscopy of high spin isomers – a review

This review summarizes the experimental data on charge radii differences among ground state and high spin isomeric states determined by high-resolution laser spectroscopic methods. A comparison is presented between radii changes obtained from the isomeric shifts in the atomic spectra and from the quadrupole moments of both ground and isomeric states under the assumption that the radii changes are determined by the difference of the quadrupole deformations. Special attention is paid to isomers arising from the break-up of nucleon pairs and isomers of odd–odd nuclei. The characteristic features of the radii changes for isomeric states of different origin are discussed.     

Beam-based calibrations of the BPM offset at C-ADS Injector Ⅱ

Beam-based BPM offset calibration was carried out for Injector II at the C-ADS demonstration facility at the Institute of Modern Physics(IMP), Chinese Academy of Science(CAS). By using the steering coils integrated in the quadrupoles, the beam orbit can be effectively adjusted and BPM positions recorded at the Medium Energy Beam Transport of the Injector II Linac. The studies were done with a 2 m A, 2.1 Me V proton beam in pulsed mode.During the studies, the "null comparison method" was applied for the calibration. This method is less sensitive to errors compared with the traditional transmission matrix method. In addition, the quadrupole magnet's center can also be calibrated with this method.     

Beam delivery system with a non-digitized diffractive beam splitter for laser-drilling of silicon

We report a beam-delivery system consisting of a non-digitized diffractive beam splitter and a Fourier transform lens. The system is applied to the deep-drilling of silicon using a nanosecond pulse laser in the manufacture of inkjet printer heads. In this process, a circularly polarized pulse beam is divided into an array of uniform beams, which are then delivered precisely to the process points. To meet these requirements, the splitter was designed to be polarization-independent with an efficiency>95%. The optical elements were assembled so as to allow the fine tuning of the effective overall focal length by adjusting the wavefront curvature of the beam. Using the system, a beam alignment accuracy of<5 μm was achieved for a 12-mm-wide beam array and the throughput was substantially improved (10,000 points on a silicon wafer drilled in ~1 min). This beam-delivery scheme works for a variety of laser applications that require parallel processing.     

液晶光阀的偏光显示特性分析

讨论了液晶光阀的偏光扭曲向列性效应, 分析了液晶光阀中液晶分子在交流电场作用下重新取向后的扭曲, 测量了TB3639型液晶光阀在特定的频率连续改变外加交流电压条件下,液晶分子重新取向后的扭曲角度以及液晶光阀的电光特性。测量结果表明,在外加电压连续改变时,入射线偏振光的透射率呈现连续非线性变化,这种非线性变化可以由液晶分子的扭曲量来改变。同时液晶分子180°的扭曲使得液晶光阀具有较陡的电光特性曲线,这对于多通道矩阵寻址方式的液晶光阀而言在矩阵显示中可有更多的通道寻址线和更高的对比度。     

单双层共轭系统的共轭高度对等晕角的影响

 简要介绍了传统自适应光学系统的局限性和多层共轭自适应光学基本原理。模拟了单双层共轭校正系统的共轭高度,并结合平程与垂程(HV模型)两种传输状态对系统等晕角增益作了进一步的分析。对单层共轭系统,在20 km的传输距离内,在平程中整个区域都属于等晕角放大区,共轭高度的最佳位置在传输距离的中间（约10 km处）,等晕角取极大值,增益效果较好;但垂程中增益效果变差,且等晕角放大区也仅在3.6 km之内。对双层共轭系统来说,第1层共轭高度的变形镜主要对近距离畸变波前进行校正,并对整个传输距离的等晕角影响很大,是双层共轭系统的关键因素;第2层共轭高度对远距离等晕角影响较大。     

双螺旋叠栅条纹检测光束准直性的两种方法

介绍双螺旋叠栅条纹检测光束准直性的基本原理,进一步就双螺旋叠栅条纹的特征参量与被测光束发散角(即光束准直精度)的关系进行分析和推导。在分析双螺旋叠栅条纹进行时,首先采用频域低通滤波提取纯叠栅条纹,然后提取纯叠栅条纹的特征参量。提出两种特征参量的提取方法,一种依次进行傅里叶变换计算相位信息的傅里叶变换方法,另一种是受传统时间相移算法启发而提出的空间相移算法,讨论了在两种方法中极坐标的重采样问题和相应的计算公式,并进行了计算机模拟。结果表明,傅里叶变换方法和空间相移算法实质都是获取叠栅条纹全场趋势的平均值,使最终光束发散角的检测具有很高的精度,对自成像条纹周期的检测误差在±2.8‰以内。     

基于二元光学设计的高能激光窗口的初步探讨

对非均匀近场强度分布影响强激光远场聚焦效果的原因进行了分析。对高能激光窗口进行了二元光学设计。提高了光束强度分布的均匀性,改善了光束质量。介绍了二元光学设计的基本原理,采用随机并行扰动爬山法对窗口的位相分布、变换后的光束强度分布、衍射效率和光束均匀性进行了计算。计算结果表明,基于二元光学设计的激光窗口能有效地改善光束强度分布的均匀性,提高了发射光束的质量。