New Cysteine-Containing PEG-Glycerolipid Increases the Bloodstream Circulation Time of Upconverting Nanoparticles

Upconverting nanoparticles have unique spectral and photophysical properties that make them suitable for development of theranostics for imaging and treating large and deep-seated tumors. Nanoparticles based on NaYF₄ crystals doped with lanthanides Yb³⁺ and Er³⁺ were obtained by the high-temperature decomposition of trifluoroacetates in oleic acid and 1-octadecene. Such particles have pronounced hydrophobic properties. Therefore, to obtain stable dispersions in aqueous media for the study of their properties in vivo and in vitro, the polyethylene glycol (PEG)-glycerolipids of various structures were obtained. To increase the circulation time of PEG-lipid coated nanoparticles in the bloodstream, long-chain substituents are needed to be attached to the glycerol backbone using ether bonds. To prevent nanoparticle aggregation, an L-cysteine-derived negatively charged carboxy group should be included in the lipid molecule.     

基于孔口出流模型的实验研究及理论分析

基于孔口出流模型对底部有小孔的圆柱体容器中液体液面高度随时间的变化规律进行了实验研究,并通过计入液体表面张力引起的孔口收缩和流体黏滞力导致的能量损失对实验结果进行了理论分析,与实验结果一致.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

从革命到改良：整顿《解放与改造》与“梁启超系”的渐进取向

《解放与改造》由张东荪在1919年创办,在五四时期风行一时,影响极大。刊名中“解放”的涵义本有整体性、对抗性的破坏倾向,故杂志对西方现代文明、中国传统文明、现有政权均取革命立场,倡导在“解放”一切现状基础上进行改造。同时,以讨论、宣传社会主义为职责,高谈主义而不重具体问题之研究、解决。然而,1920年梁启超、蒋百里等欧游归国,接收并整顿《解放与改造》,更名《改造》,扭转了此前由张东荪主导的革命倾向：舍弃“解放”中所带有的破坏性的战斗精神,对中国传统文明与西方现代文明均取渐进改造方式;同时,不再以社会主义为倡导,从原先的高谈主义,转为研究具体的问题。在思想界整体逐渐走向革命的潮流中,“梁启超系”却通过整顿《改造》,从革命回归改良,成为激进时代的渐进者。     

Subsurface layers with degenerate hole gas arising in germanium immersed into liquid helium under 60Co-gamma irradiation

Abstract

The subsurface layers with quasi-metal hole conductivity have been observed in n- and p-Ge immersed into liquid He under the ⁶⁰Co-gamma-irradiation. three conditions are to be fulfilled simultaneously for the production of the layers: low temperature, direct contact between helium and germanium and gammairradiation.     

Monte Carlo simulation of GM probe and NaI detector efficiency for surface activity measurements

This paper deals with the direct measurement of total (fixed plus removable) surface activity in the presence of interfering radiation fields. Two methods based on Monte Carlo simulations are used: one for a Geiger–Muller (GM) ionisation probe and the other for sodium iodide (NaI) detector with lead collimators; equations for the most general case and the geometry models for Monte Carlo simulation of both (GM and NaI) detectors are employed. Finally, an example of application is discussed.     

The Hard Rod Fluid in a Uniform Gravitational Field

Abstract

The system of hard rods in an external, uniform gravitational field is studied and exact expressions obtained for the partition functions, and the one- and two-particle distributions. In principle all higher order distributions can be exactly expressed as finite sums and the Laplace transforms of the one-particle density and pressure for a semi-infinite system are reducible to single integrals. Limiting cases of weak field and small rod diameters are examined. In the former case, these results agree with Percus and Lebowitz's local density expansion. In the latter case, corrections to the barometric pressure and density laws are obtained. Finally some mathematical difficulties involved in the calculation of the virial expansion and distribution of roots of the grand partition function are mentioned.     

Conventional processes and membrane technology for carbon dioxide removal from natural gas:A review

Membrane technology is becoming more important for CO 2 separation from natural gas in the new era due to its process simplicity,relative ease of operation and control,compact,and easy to scale up as compared with conventional processes.Conventional processes such as absorption and adsorption for CO 2 separation from natural gas are generally more energy demanding and costly for both operation and maintenance.Polymeric membranes are the current commercial membranes used for CO 2 separation from natural gas.However,polymeric membranes possess drawbacks such as low permeability and selectivity,plasticization at high temperatures,as well as insufficient thermal and chemical stability.The shortcomings of commercial polymeric membranes have motivated researchers to opt for other alternatives,especially inorganic membranes due to their higher thermal stability,good chemical resistance to solvents,high mechanical strength and long lifetime.Surface modifications can be utilized in inorganic membranes to further enhance the selectivity,permeability or catalytic activities of the membrane.This paper is to provide a comprehensive review on gas separation,comparing membrane technology with other conventional methods of recovering CO 2 from natural gas,challenges of current commercial polymeric membranes and inorganic membranes for CO 2 removal and membrane surface modification for improved selectivity.     

Thermally induced fixed diradical generation on solid supports for surface‐initiated polymerization

A method is presented for generation of all surface‐bound radicals on solid polymer surfaces. Thus, secondary amide group of newly synthesized crosslinking comonomer, methacryloyloxyethyl methacrylamide was determined as versatile precursor for generation fixed diradicals on solid microspheres, obtained by copolymerization with methyl methacrylate (MMA) in aqueous suspension. Nitrosoation of the secondary amide groups on the microbeads and followed thermolysis above 90 °C was demonstrated to give surface‐bound radicals, capable of initiating polymerization of vinyl monomers, such as; styrene, MMA, N‐vinyl formamide, and N‐vinyl, 2‐pyrrolidone, as evidenced by H NMR, Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimeter techniques. Appreciable grafting yields (55.1%–286.1%) and low free‐homopolymer formation (7.2%–19.7%) were noted within 6 h of the grafting at 100 °C in each case. This strategy involving the use of amide functional crosslinker seemed to be generally applicable to generate surface‐bound radicals for surface‐initiated polymerization from various solid substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012