PLA制备Tb-Si纳米颗粒及室温光致发光性能研究

采用脉冲激光烧蚀技术(PLA)在n型Si(100)单晶衬底上制备Tb-Si纳米颗粒。原子力显微镜(AFM)观察样品的表面形貌,发现样品表面是均匀分布的纳米颗粒,颗粒尺寸在10~20 nm之间,分布密度大约为6×1010/cm2。光电子能谱(XPS)及高分辨透射电镜(HRTEM)分析表明,纳米尺度的单晶硅化物颗粒的主要成分为Tb-Si及少量Tb-Si-O结构。室温下以荧光为激发光对样品的光致发光(photoluminescence)性能进行测试,结果表明样品在可见光区具有较强的发光现象,主要有4个发光峰,分别位于485,545,585和620 nm附近,这些发光峰主要由Tb3+中电子在不同能级之间的跃迁造成。     

铒激光脉冲消融泌尿结石和胆结石比较研究

利用光学弱相干显微成像系统对脉冲激光消融硬生物组织后形成的凹坑二维和三维形貌进行了扫描,分析了Erbium∶YAG激光脉冲消融生物硬组织特性.结果表明:相同激光参量条件下,消融胆结石比消融泌尿结石具有更高的消融效率;消融胆结石或消融泌尿结石时,脉冲能量越大,消融效率越高;消融效率提高主要体现在凹坑表面直径更宽、高度更深...     

Fourier transform microwave spectroscopy of LiCCH, NaCCH, and KCCH: Quadrupole hyperfine interactions in alkali monoacetylides

The alkali metal monoacetylides LiCCH, NaCCH, and KCCH and their deuterium isotopologues have been investigated using Fourier transform microwave (FTMW) spectroscopy in the frequency range 5-37 GHz. The molecules were synthesized in a supersonic expansion by the reaction of metal vapor, produced by laser ablation, with acetylene or DCCD. Use of target rods of the pure metal and a DC discharge immediately following the laser interaction region were significant factors in molecule production. Multiple rotational transitions were recorded for all species, except where only the J = 1 → 0 line was accessible (Li species). Quadrupole hyperfine interactions arising from the metal nuclei were resolved in each molecule, as well as those from the deuterium nucleus in the deuterated isotopologues. From a combined analysis with previous millimeter-wave data, refined rotational constants were determined for these species, as well as ⁷Li, ²³Na, ³⁹K, and D eQq parameters. The values of the metal quadrupole coupling constants are comparable to those of the alkali halides and hydroxides, indicating a similar degree of ionic character in the metal-ligand bond.     

Surface morphologic and structural analysis of IR irradiated silver

The microstructural morphological changes in laser irradiated targets are investigated. Nd:YAG laser (1064 nm, ∼12 ns nominal, 1.1 MW) is used to irradiate 4 N pure (99.99%) fine polished and annealed silver samples in ambient air and under vacuum ∼10⁻⁶ Torr. The laser spot size and power density at tight focus are 12 μm and 3×10¹¹ W/cm², respectively. SEM micrographs and X-ray diffractograms of the exposed and unexposed targets reveal the surface texture and structural changes, respectively. Amongst the ablation mechanisms involved, exfoliation and hydrodynamic sputtering are found to be dominant. Surface modifications appear in the form of craters and ripples formation. Heat is conducted non-uniformly through narrow channels at the surface. Thermal stresses induced by the laser do not disturb inter planar distance of the target. On the other hand irradiation causes significant variations in grain size and diffracted X-rays intensities.     

Control of wettability of hydrogenated amorphous carbon thin films by laser-assisted micro- and nanostructuring

A flexible and rapid surface functionalization of amorphous carbon films shows a great potential for various application fields such as biological surfaces and tribological systems. For this purpose, the combination of thin film deposition and subsequent laser material processing was investigated. Amorphous carbon layers doped with hydrogen were deposited on silicon wafers by reactive direct-current magnetron sputtering. Films with three different hydrogen contents were synthesized. Subsequent to the thin film deposition process, UV laser material processing at wavelengths of 193 nm or 248 nm was performed with respect to chemical surface modification and surface structuring on micro- and nanometer scale. Depending on structure size and laser-induced chemical surface modification the adjustment of the surface energy and wetting behaviour in a broad range from hydrophobic to hydrophilic was possible. The chemical modification and the ablation mechanisms near the ablation threshold were strongly influenced by the hydrogen content in amorphous carbon thin films.Structural and chemical information of the as-deposited and modified films was obtained by Raman spectroscopy, X-ray photoelectron spectroscopy and contact angle measurements.     

Physical mechanism of silicon ablation with long nanosecond laser pulses at 1064 nm through time-resolved observation

Nanosecond (ns) laser ablation can provide a competitive solution for silicon micromachining in many applications. However, most of the previous studies focus on ns lasers at visible or ultraviolet (UV) wavelengths. The research is very limited for ns lasers at infrared (e.g., 1064 nm) wavelengths (which often have the advantage of much lower cost per unit average output power), and the research is even less if the ns laser also has a long pulse duration on the order of ∼100 ns. In this paper, time-resolved observation using an ICCD (intensified charge-coupled device) camera has been performed to understand the physical mechanism of silicon ablation by 200-ns and 1064-nm laser pulses. This kind of work has been rarely reported in the literature. The research shows that for the studied conditions, material removal in laser silicon ablation is realized through surface vaporization followed by liquid ejection that occurs at a delay time of around 200-300 ns. The propagation speed is on the order of ∼1000 m/s for laser-induced plasma (ionized vapor) front, while it is on the order of ∼100 m/s or smaller for the front of ejected liquid. It has also been found that the liquid ejection is very unlikely due to phase explosion, and its exact underlying physical mechanism requires further investigations.     

激光剥蚀-电感耦合等离子体质谱测定植物样品中的元素

采用193 nm准分子激光剥蚀-电感耦合等离子体质谱(LA-ICP-MS)对标准植物粉末样品(GBW07602-GBW07603灌木枝叶、GBW07604杨树叶、GBW07605茶叶、GBW08514烟草)中13种元素(Li,B,Na,Mg,Al,K,Ca,Cr,Mn,Fe,Ni,Cu,Ba)进行定量测试.向植物粉末样...     

激光剥蚀-电感耦合等离子体质谱:双外标结合基体归一定量校准策略

定量校准策略是激光剥蚀电感耦合等离子体质谱(AICP-MS)分析技术的重要组成部分,直接影响分析数据的质量.本研究评估了现有玻璃标准物质定值不确定度的相对大小,并探究了NIST、MPI-DING和USGS系列玻璃标准物质之间的基体效应.结果表明,NIST610的定值不确定度优于其它玻璃标准物质,在本实验条件下,NIST、MPI-DING和USGS系列玻璃标准物质之间的基体效应可忽略不计.在此基础上提出了双外标结合基体归一定量校准策略,外标分别为NIST610和StHs6/80-G.此策略克服了由于NIST610主量成分与地质样品差别大而造成的主量元素准确度差以及StHs6/80-G中某些微量元素含量低、定值不确定度较大等缺点.对比采用3种定量校准策略(单外标NSIT610基体归一法、单外标StHs6/80G基体归一法和双外标基体归一法)校准的ML3B-G数据可知,双外标基体归一法有效避免了单外标基体归一法的不足,并提高了分析数据的准确度.采用双外标结合基体归一定量校准策略校准了BCR-2G、CGSG-2和KL-2G中的主量元素和微量元素.结果表明,绝大多数分析数据在定值不确定度范围内,验证了此校准策略的实用性.同时,本研究得到的主量微量元素数据进一步补充了BCR-2G、CGSG-2和KL-2G的定值数据库.     

Exploring lead exposure in ancient Chilean mummies using a single strand of hair by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS)

Lead exposure has received increased attention over the past few decades since it has been shown to have adverse effects on physical and intellectual development in humans. The use of biological tissues such as blood, teeth, hair, and bone for assessment of lead exposure has been previously demonstrated. While analysis of blood for trace metals provides information concerning recent exposure, hair offers insight into a period of several months, and is preferable since it is non-invasively collected and easily stored. The present study analyzed total of 49 ancient hair samples for lead (Pb_H) using LA-ICP-MS. Samples belonged to an ancient fisher hunter–gatherer culture called the “Chinchorro,” and who occupied regions of the Atacama Desert on the northern coast of Chile from approximately 5000–1500 B.C. and practiced the first-known form of artificial mummification. Several samples from a post-Chinchorro agricultural community (n = 12) ca. 1000–1400 A.D. were also analyzed. A suite of hair standards was developed using contemporary hair from the same region and was subsequently used to make linear calibration functions for lead determination in single strands of hair using LA-ICP-MS. Three linear scans ranged from 500 to 1000 μm were performed for each sample and signal intensities were normalized over ¹³C. The distribution of lead in the central medulla in a 100 μm cross-section scan of hair strand demonstrated minimal exogenous contamination. Hair lead (Pb_H) concentrations ranged between 2.2 μg/g and 12.8 μg/g could be accurately quantified with these standards. Twenty one out of 49 samples (43%) showed Pb_H concentrations higher than the average value of 5 μg/g for unexposed individuals (range 1.1–228.0 μg/g). Median hair lead concentrations by burial sites and are shown in order of decreasing concentration: Morro (13.8 μg/g) > Iquique (6.6 μg/g) > Azapa (4.5 μg/g) > Yungay (4.1 μg/g) > Camarones (2.7 μg/g). Most of the burial sites showed Pb_H concentrations greater than the normal value for unexposed individuals and outliers heavily influenced average concentrations. The results suggest that the Chinchorro and later agro-pastoral populations were not widely exposed to naturally elevated lead.