Effect of pressure on the properties of DH diode lasers in AlxGa1-xAsySb1-y/GaSb system

Abstract

A helium pressure appparatus for diode laser studies up to 1.4 GPa at 77–300 K has been developed. DH lasers with Al_xGa_1-xAs_ySb_1-y active layers (x=0-0.05) lattice-matched to GaSb substrates have been investigated. It has been shown that in lasers with x,y=0 pressure dependences of the threshold current density (J_th) and the average electron lifetime at the threshold (τ) measured at 80 K depend strongly on the quadratic recombination of L^c ₆ electrons, the characteristic coefficient being 1.5×10^?11 cm³s^?1. The pressure-composition equivalence coefficient dx/dP=2.2×10^?10 Pa^?1 has been obtained for the lowest temperatures used.     

Genetic alloy design based on thermodynamics and kinetics

A theory-guided computational approach for alloy design is presented. Aimed at optimising the desired properties, the microstructure is designed and an alloy composition optimised accordingly, combining criteria based on thermodynamic, thermokinetic and mechanical principles. A genetic algorithm is employed as the optimisation scheme. The approach is applied to the design of ultra-high strength stainless steels. Three composition scenarios, utilising different strengthening precipitates (carbides, Cu and NiAl/Ni₃Ti), are followed. The results are compared to a variety of existing commercial high-end engineering steels, showing that the design strategy presented here may lead to significant improvements in strength beyond current levels.     

Properties of the Ce–Pd–Pt(111) overlayer system

The Pd–Pt(111) and the Ce–Pd–Pt(111) overlayer systems were studied by X-ray photoelectron spectroscopy and low-energy electron diffraction (LEED). Variations in the work function were measured by ultraviolet photoelectron spectroscopy. The Pd overlayer thicknesses were in the range of 1 to 4 monolayers (MLs). The Ce overlayer thicknesses were in the range is of 0.5 to 1.5 MLs. The interfaces were studied for annealing temperatures up to 700°C. Surface alloying or intermixing of Ce, Pd and Pt was observed. Upon deposition at ambient temperatures, Ce forms an overlayer. During annealing, both Pd and Ce were found to dissolve into the Pt substrate. For a Pd coverage of about 1 ML, the Ce–Pd–Pt(111) system was found to be Pt, terminated after annealing to 700°C. For Pd coverage above 1 ML, both Pd and Pt were found to be present at the surface. Cerium was found to be absent from the top surface layer in both cases.     

Unusual nucleation and growth of γ′ iron nitride upon nitriding Fe–4.75 at.% Al alloy

The influence of substitutionally dissolved Al in ferritic Fe–4.75 at.% Al alloy on the nucleation and growth of γ′ iron nitride (Fe₄N_{1? x} ) was investigated upon nitriding in NH₃/H₂ gas mixtures. The nitrided specimens were characterised employing optical microscopy, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis and X-ray diffraction. As compared to the nitriding of pure ferrite (α-Fe), where a layer of γ′ develops at the surface, upon nitriding ferritic Fe–4.75 at.% Al an unusual morphology of γ′ plates develops at the surface, which plates deeply penetrate the substrate. In the diffusion zone, nano-sized precipitates of γ′ and of metastable, cubic (NaCl-type) AlN occur, having, with the ferrite matrix, a Nishiyama–Wassermann orientation relationship and a Bain orientation relationship, respectively. The γ′ plates contain a high density of stacking faults and fine ε iron nitride (Fe₂N_{1? z} ) precipitates, although the formation of ε iron nitride is not expected for the employed nitriding parameters. On the basis of dedicated nitriding experiments it is shown that the unusual microstructural development is a consequence of the negligible solubility of Al in γ′ and the obstructed precipitation of the thermodynamically stable, hexagonal (wurtzite-type) AlN in ferrite.     

Reverse α–α´ phase separation in Fe-20Cr-6Al alloy

The reverse α–α′ phase separation in Fe-20Cr-6Al alloys has been monitored by differential scanning calorimetry in as-hot rolled and recrystallized samples previously aged at 435?°C. The splitting in the position of the minima, and the increasing enthalpy change involved, might be explained in terms of dissolution of α′ particles with different compositions and volume fractions. These results are fully consistent with the α–α′ phase separation kinetics determined by atom probe tomography during ageing at 435?°C. The monitoring of activation energy for α′ dissolution indicates that it is faster in as-hot rolled samples. Finally, the activation energy evolution indicates that there is first a dissolution of β′ Fe(AlTi) phase followed by α′ dissolution.     

On the absence of shear cracking and grain boundary cavitation in secondary tensile regions of Ti–6Al–4V–0.1B alloy during hot (α + β)-compression

Deformation instabilities, such as shear cracking and grain boundary cavitation, which are observed in the secondary tensile region of Ti–6Al–4V alloy during compressive deformation in the (α?+?β)-phase field, do not form in Ti–6Al–4V–0.1B alloy when processed under the same conditions. This has been attributed to the microstructural modifications, e.g. the absence of grain boundary α and adjacent grain boundary retained β layers and a lower proportion of 90^o-misoriented α-colonies that occur with boron addition.     

Laser-induced changes in titanium by femtosecond,picosecond and millisecond laser ablation

In order to realize the qualitative control of the laser-induced changes trend and the quantitative control of the laser-induced changes range in titanium upon laser irradiation with different pulse duration, comparative ablation experiments by femtosecond, picosecond and millisecond pulsed lasers were carried out on titanium in this study. Then the final surface morphology, aspect ratio, chemical composition and microstructural state of the ablated titanium were analyzed by laser scanning confocal microscopy, X-ray photoelectron spectroscopy and transmission electron microscopy, respectively. The dependency of the morphology, size, composition and microstructure of ablated titanium on laser pulse duration variation were emphatically discussed. It is found that, as the laser pulse duration increases from femtosecond to millisecond scale, surface morphology quality of ablated titanium gets worse, aspect ratio of microgroove decreases, proportion of titanium oxides in final ablation products becomes larger and the microstructural state of ablated titanium has a higher amorphization degree, which can be attributed to the decreased laser intensity per pulse and enhanced heat conduction effect in titanium with the pulse duration increasing.     

Investigation of radiation defects in Fe-Cr alloy

Abstract

The kinetics of radiation defect accumulation and subsequent recovery during/after electron irradiation below 273 K, at 323 K and 373 K were investigated for the Fe-15.7 at.% Cr using positron annihilation measurements at room temperature. Formation of vacancy clusters was observed at all of the irradiation temperatures. The formation of clusters and kinetics of their accumulation point to mobility of vacancies at least at room temperature. The cluster rearrangement and variations in the cluster configuration take place during annealing.     

Exact solutions of （3＋1）-dimensional nonlinear incompressible non-hydrostatic Boussinesq equations

The symmetries and the exact solutions of the (3+1)-dimensional nonlinear incompressible non-hydrostatic Boussinesq (INHB) equations, which describe atmospheric gravity waves, are studied in this paper. The calculation on symmetry shows that the equations are invariant under the Galilean transformations, the scaling transformations, and the space-time translations. Three types of symmetry reduction equations and similar solutions for the (3+1)-dimensional INHB equations are proposed. Traveling and non-traveling wave solutions of the INHB equations are demonstrated. The evolutions of the wind velocities in latitudinal, longitudinal, and vertical directions with space-time are demonstrated. The periodicity and the atmosphere viscosity are displayed in the (3+1)-dimensional INHB system.