两相颗粒多孔材料导热系数研究

对固-气两相颗粒多孔材料导热系数的预测,尚未见以实验数据对其各预测模型进行分析及验证其准确度的相关文献。本文利用断电热线法测定石英砂、碳化硅、工程沙以及煤灰的导热系数;将模型预测结果与实验数据进行对比分析,结果表明,Kunii and Smith模型误差小;考虑孔隙率的影响,利用实测数据对Kunii and Smith模型进行修正,给出新的预测模型;通过与国外学者给出的实测导热系数的对比,验证了本文给出的修正模型的准确性。     

Polarization-encoded all-optical quaternary multiplexer and demultiplexer - A proposal

Multi-valued logic is positioned as a coming generation technology that can execute arithmetic functions faster and with less interconnect than binary logic. Furthermore, nonbinary data storage would require less physical space than binary data. The application of multi-valued digital signals can provide considerable relief of capacity constraints. In electronics many proposals have already been reported. But, here for the first time we propose an all-optical circuit for designing quaternary (four-valued) multiplexer and demultiplexer with the help of some polarization-encoded basic quaternary logic gates (quaternary min and quaternary delta literal). Nonlinear interferometer-based optical switch can take an important role here. The principles and possibilities of design of all-optical quaternary multi-valued multiplexer and demultiplexer circuits are proposed and described.     

红外探测装置中光谱分光镜的设计与制备

在红外探测装置中,光谱分光镜是用来把3 μm～5 μm和8 μm～12 μm 2个波段的光谱分开的零件.介绍了一种在通用镀膜机上制备光谱分光镜的新工艺.在该膜系的设计过程中,把Willey公式引入到对其平均透过率最高值进行估算的过程中,同时针对国产镀膜机控制精度不高的特点,尽量使用规整膜层进行设计.为了进一步提高8 μm～12 μm波段的透过率,在膜系的最外侧引进了一层自行配制的低折射率氟化物材料,制备出了符合技术指标的红外光谱分光镜.     

A sonochemical-assisted synthesis and annealing temperature effect of La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> nanoparticles

This paper reports on the sonochemical-assisted synthesis of La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles (NPs) which have a single-crystalline perovskite structure. The average particle size of LSMO NPs was controlled from about 40 to 120 nm by changing the annealing temperatures from 750 to 1050°C. The particle size, electrical resistivity, and ferromagnetic transition temperature of LSMO NPs were strongly dependent on the annealing temperature. A substantial decrease in resistivity and an enhancement in the insulator–metal transition temperature were found on increasing the annealing temperature. Furthermore, the enhancement in magnetization and paramagnetic–ferromagnetic (PM–FM) transition temperatures was observed as the annealing temperature increases.     

Manufacturing of Volumetric Glass–Based Composites with Single‐ and Double‐QD Doping

Quantum dot (QD)‐based light‐emitting materials are gaining increased attention because of their easily tunable optical properties desired for various applications in biology, optoelectronics, and photonics. However, few methods can be used to manufacture volumetric materials doped with more than one type of QD other than QD‐polymer hybrids, and they often require complicated preparation processes and are prone to luminescence quenching by QD aggregation and separation from the matrix. Here, simultaneous doping of a volumetric glass‐based nanocomposite with two types of QDs is demonstrated for the first time in a single‐step process using the nanoparticle direct doping method. Glass rods doped with CdTe, CdSe/ZnS, or co‐doped with both QDs, are obtained. Photoluminescence and lifetime experiments confirm temperature‐dependent double emission with maxima at 596 and 720 nm with mean lifetimes up to 16 ns, as well as radiative energy transfer from the short wavelength–emitting QDs to the long wavelength–emitting QDs. This approach may enable the simple and cost‐efficient manufacturing of bulk materials that produce multicolor luminescence with cascade excitation pumping. Applications that could benefit from this include broadband optical fiber amplifiers, backlight systems in LCD screens, high‐power LEDs, or down‐converting solar concentrators used to increase the efficiency of solar panels.     

Vibronic origins of high T c

In this paper we present a detailed development of our vibronic mechanism for the explanation of high temperature superconductivity. We first review the evidence for believing that some unified mechanism for “low” and “high” T _c is required. We then develop the case for the existence of the double-well motions, required by our theory, in these systems, and proceed to develop our ideas further to the point of unifying, the T _c ～ 100 K, and the T _c ～ 40 K systems. We also advance a possible explanation of the anomalous isotope effects in these systems, and conclude with an extended discussion of non-cuprate systems and general criteria for high T _c theories, including the gap to kT _c ratio.     

Reliability in reconstruction of the axisymmetric refractive index profiles from transverse interferograms. Accurate versus approximate methods: A comparative study

A mathematical formalism related to the approximate as well as the accurate interferometric data reduction schemes is briefly outlined and subsequently applied in the reconstruction of the assumed (Luneburg) axisymmetric refractive index distribution. The presented comparative analysis confirms the generally held opinion that the approximate methods (“straight-line” and Kokubun-Iga approaches) may provide quite reasonable results in the examination of refractively inhomogeneous disturbances characterized by weak gradient and moderate index variation. On the other hand, the accurate scheme for transverse interferometric data interpretation and reduction, based on the close-form correlation between the fringe shift and the deflection function, [1] remains the only method for reliable reconstruction of strongly refracting index profiles, independently of magnitude of refraction and ambiguity of the fringes. This fact is of considerable importance for transverse interferometry of fibers (preform rods) and/or GRIN-rod lenses characterized by high numerical apertures.     

Relation between interfacial shear strength and compressive strength of carbon fiber/epoxy resin composite strands

The mechanism with which the fiber-matrix interfacial strength exerts its influence on the compressive strength of fiber reinforced composites has been studied by measuring the axial compressive strength of carbon fiber/epoxy resin unidirectional composite strands having different levels of interfacial shear strength. The composite strands are used for experiments in order to investigate the compressive strength which is not affected by the delamination taking place at a weak interlayer of the laminated composites. The interfacial strength is varied by applying various degrees of liquid-phase surface treatment to the fibers. The efficiency of the compressive strength of the fibers utilized in the strength of the composite strands is estimated by measuring the compressive strength of the single carbon filaments with a micro-compression test. The compressive strength of the composite strands does not increase monotonically with increasing interfacial shear strength but showes lower values at higher interfacial shear strengths. With increasing interfacial shear strength, the suppression of the interfacial failure in the misaligned fiber region increases the compressive strength, while at higher interfacial shear strengths, the enhancement of the crack sensitivity decreases the compressive strength.     

Fabrication of continuous fiber-reinforced thermoplastic composites with structural gradient from sheath-core type bicomponent fibers

Sheath-core type bicomponent fibers of polypropylene (PP) as a sheath component and thermotropic liquid crystalline polymer (TLCP) as a core component were prepared by the highspeed melt spinning process. Continuous fiber reinforced thermoplastic composites, in which TLCP acts as a reinforcing fiber and PP as a matrix polymer, were fabricated by the compression molding of these fibers. In the melt spinning, the attainable highest take-up velocity of TLCP was improved by co-processing with PP. Tensile modulus and strength of the TLCP component in the PP/TLCP bicomponent fibers increased with an increase in the take-up velocity. Comparison of wide-angle X-ray diffraction patterns of starting bicomponent fibers and fabricated composites indicated that the orientation relaxation of TLCP did not occur in the compression molding process. Accordingly, the tensile modulus and strength of the PP/TLCP composites were similar to those of the bicomponent fibers. Continuous fiber reinforced thermoplastic composites with various types of fiber content distributions were fabricated from the bicomponent fibers in which sheath-core composition was changed gradually in the spinning process. In the three-point bending test, the composites with two different types of symmetric structural gradients, one with higher TLCP fiber content near the surfaces than in the center and the other with higher TLCP content in the center than near the surfaces, exhibited different flexural moduli even though the overall TLCP contents were comparable. In the three-point bending test of a composite with asymmetric structural gradient, the yielding behavior and maximum flexural load varied depending on the direction of load application although the initial flexural moduli were similar.