上市公司兼并规律的实证分析

本应用因子分析方法和Logistic回归模型，对上市公司兼并规律作了实证分析，得出的结论对优化上市公司资产重组具有参考意义。     

外加电场下激光诱导Al等离子体特性的实验研究

由Q-Nd:YAG脉冲激光(波长1.06μm,脉宽10 ns)烧蚀Al靶产生等离子体.观测了在低气压和直流电场条件下的Al等离子体发射光谱.研究了激光功率密度和直流电场对各谱线强度的影响,分析了谱线半高全宽与外加电压,等离子体电子温度与激光能量的变化规律.结果表明,直流电场对铝原子谱线强度有显著的增强,铝原子谱线的半高全宽与直流电场的外加电压基本上呈线性关系.     

Action Principle and Modification of the Faddeev–Popov Factor in Gauge Theories

The quantum action (dynamical) principle is exploited to investigate the nature and origin of the Faddeev–Popov (FP) factor in gauge theories without recourse to path integrals. Gauge invariant as well as gauge non-invariant interactions are considered to show that the FP factor needs to be modified in more general cases and expressions for these modifications are derived. In particular we show that a gauge invariant theory does not necessarily imply the familiar FP factor for proper quantization. PACS numbers: 11.15.-q; 12.10.-g; 12.15.-y; 12.38.-t     

~（23）Na~（39）K分子D~1∏→X~1∑~＋激光感生荧光光谱及强度研究

实验获得了Ａｒ＋激光５１４．５ｎｍ线诱导２３Ｎａ３９Ｋ分子产生的Ｄ１∏→Ｘ１∑＋跃迁荧光谱．通过测量激光感生荧光光谱强度随泵浦功率、热管炉温度及缓冲气压变化规律，详细研究了其跃迁机制．用最小二乘法拟合获得２３Ｎａ３９Ｋ分于Ｘ１∑＋态振动常数．理论计算了各跃迁谱支波长值及Ｆｒａｎｃｋ－Ｃｏｎｄｏｎ因子和光谱强度值，与实验观测值符合得相当好，充分表明本文对激光感生荧光光谱的归属以及对各支谱线振、转量子数的赋值是合理的．     

脑细胞激活素药物的化学成分分析

采用日本岛津LC-60A型高压液相色谱仪和美国P-E3030型原子吸收分光光度计，对该药进行了氨基酸、维生素和化学元素的含量测定。结果表明，该药含有18种氨基酸，不少于3种维生素和20几种化学元素，为进一步改进该药物的合理配制方法和临床应用提供了参考数据。     

应用加权列联表分析预测汛期（4─9月）洪涝趋势

本文根据汉寿县１９６０─１９８８年洪涝灾害资料，应用加权列联表分析法，与前期气候因子建立洪涝趋势预测模式。最后对１９８９─１９９０年洪涝试报，取得了满意的效果。     

厄米-双曲余弦-高斯光束的瞄准稳定性

用失调叠加积分的方法 ,对厄米双曲余弦高斯光束的瞄准稳定性作了研究 ,得到了厄米双曲余弦高斯光束失调因子 ηm2 的精确解析公式和近似解析公式 ,并用数值计算了相对横向偏移和相对角向偏移对失调因子ηm2 的影响以及对精确解析公式和近似解析公式的适用范围作了分析和说明。     

信息化对区域经济影响的数理分析

本文以信息化与经济指标资料为基础,运用加权回归、因子分析和聚类分析等方法,讨论了全国31个省(市、区)信息化水平及其与经济发展关系,给出地区综合发展水平的排行榜。并提出若干促进信息化建设的建议。     

Photoelastic stress freezing analysis of total shoulder replacement systems

Photoelastic stress freezing analyses in the orthopaedic literature have, in the past, been limited to studies where bone-on-bone, bone-on-metal or ultra-high molecular weight polyethylene (UHMWPE)-on-metal constructs are modeled. In these cases photoelastic plastics are used to simulate either bone or UHMWPE as it interacts with a metal implant. In joints such as the shoulder, a UHMWPE component is often cemented directly into the scapula's glenoid concavity using polymethylmethacrylate (PMMA). While a photoelastic material can be used to simulate bone with proper load scaling, UHMWPE and PMMA have very different mechanical properties at elevated stress freezing temperatures as compared within vivo body temperature. In this study, materials were identified such that proper scaling of elastic properties at elevated temperatures was utilized to simulate the metal-UHMWPE-PMMA-bone construct. Stresses on orthogonal planes throughout the glenoid were compared for two different UHMWPE component anchoring geometries (keeled and pegged). High stresses were found at the neck of the glenoid and also at the component-bone interface beneath simulated PMMA inclusions.     

关于有限Abel群直接因子的平均数

对于有限Ａｂｅｌ群Ｇ，ｔ（Ｇ）定义为其直接因子的个数，在［５］中，Ｅ．Ｋｒａｔｚｅｌ对于和式得到一渐近公式，对应余项为△＿１（ｘ）．本文利用Ｅ．Ｆｏｕｖｒｙ和Ｈ　．Ｉｗａｎｉｅｃ的方法，得到了关于△＿１（ｘ）的一个新的估计，改进了Ｈ．Ｍｅｎｚｅｒ等人的结果．