On the role of the interface charge in non-ideal metal–semiconductor contacts

The bias dependent interface charge is considered as the origin of the observed non-ideality in current–voltage and capacitance–voltage characteristics. Using the simplified model for the interface electronic structure based on defects interacting with the continuum of interface states, the microscopic origin of empirical parameters describing the bias dependent interface charge function is investigated. The results show that in non-ideal metal–semiconductor contacts the interface charge function depends on the interface disorder parameter, density of defects, barrier pinning parameter and the effective gap center. The theoretical predictions are tested against several sets of published experimental data on bias dependent ideality factor and excess capacitance in various metal–semicoductor systems.     

FTIR measurements of CO2 line positions and intensities at high temperature in the 3700-3750 cm spectral region

Positions and intensities for 453 spectral lines in 12 rovibrational bands of ¹²C¹⁶O₂ have been determined between 3700 and 3750 cm⁻¹. At three temperatures (294, 500, and 698 K) eight spectra have been recorded at a pressure around 5 mbar and for an absorption path of about 190 cm⁻¹ using a Bomen DA3 Fourier transform spectrometer (4 × 10⁻³ cm⁻¹ resolution). Some of the measured positions and intensities can be compared with recent experimental results that validate the experimental set-up and the data analysis procedure. The results are also compared with the values listed in the HITRAN 2000 database. If the agreement is generally good, discrepancies are observed for three hot bands.     

A finite element-spherical harmonics radiation transport model for photon migration in turbid media

In this paper, we solve the steady-state form of the Boltzmann transport equation in homogeneous and heterogeneous tissue-like media with a finite element-spherical harmonics (FE-P_N) radiation transport method. We compare FE-transport and diffusion solutions in terms of the ratio of absorption to reduced scattering coefficient, (μ_a/μ_s′) and the anisotropy factor g. Two different scattering phase function formulas are employed to model anisotropic scattering in the slab media with high g-value. Influence of void-like heterogeneities, and of their boundaries with the surrounding medium on the transport of photons are also examined.     

加速牛顿迭代收敛的新方法

提出了加速牛顿迭代收敛的新思想，构造出一类加权牛顿迭代格式，通过选取最优加权因子，使得该格式具有高阶收敛性和较小的渐近误差常数。     

激光与材料参数对瞬态SBS 诱导的激光超声破坏效果的影响

 通过数值求解一维瞬态受激布里渊散射（SBS）声光耦合波方程，从理论上分析了泵浦激光参数及光学材料参数对SBS过程发生阈值的影响。以SBS过程中建立起来的应力场抗拉（压）强度和散射场的反射率为判据，分析了激光脉宽及作用区域长度对激光超声破坏材料效果的影响，探讨了短脉冲激光（约ns）引起的激光超声对材料的破坏机理；讨论了通过参数配置有效遏制SBS过程激光超声对光学材料的破坏问题。     

Evaluation of the Lazarus-Leblond constants in the asymptotic model of the interfacial wavy crack

The paper addresses the problem of a semi-infinite plane crack along the interface between two isotropic half-spaces. Two methods of solution have been considered in the past: Lazarus and Leblond [1998a. Three-dimensional crack-face weight functions for the semi-infinite interface crack-I: variation of the stress intensity factors due to some small perturbation of the crack front. J. Mech. Phys. Solids 46, 489-511, 1998b. Three-dimensional crack-face weight functions for the semi-infinite interface crack-II: integrodifferential equations on the weight functions and resolution J. Mech. Phys. Solids 46, 513-536] applied the “special” method by Bueckner [1987. Weight functions and fundamental fields for the penny-shaped and the half-plane crack in three space. Int. J. Solids Struct. 23, 57-93] and found the expression of the variation of the stress intensity factors for a wavy crack without solving the complete elasticity problem; their solution is expressed in terms of the physical variables, and it involves five constants whose analytical representation was unknown; on the other hand, the “general” solution to the problem has been recently addressed by Bercial-Velez et al. [2005. High-order asymptotics and perturbation problems for 3D interfacial cracks. J. Mech. Phys. Solids 53, 1128-1162], using a Wiener-Hopf analysis and singular asymptotics near the crack front.The main goal of the present paper is to complete the solution to the problem by providing the connection between the two methods. This is done by constructing an integral representation for Lazarus-Leblond's weight functions and by deriving the closed form representations of Lazarus-Leblond's constants.     

心理素质诊断模型的建立与应用

综合运用国内外多种测量量表对大学生的心理素质进行诊断与测试 ,并应用多元统计分析方法对其心理素质结构主因素进行定量分析 ,在此基础上建立了心理素质诊断模型 ,并运用该模型对实际问题进行了分析 .     

Identification of micro-scale calorimetric devices II

The miniaturized calorimetric devices furnish a reduced working flat surface and permits measurements with extremely low-mass quantities. The experimental sensitivity shows relevant position dependence with x-y surface coordinates and with z-distance. The device identification is realized via a 2-D model based in Fourier general equation. Using the Marquardt method the experimental flat surface device can be identified and the fitted parameters used to simulate the behavior of the experimental system. From the model, the effects of several dissipation configurations can be evaluated. Also, via the RC-analogy, a way to 3-D experimental devices is roughly described. This revised version was published online in July 2006 with corrections to the Cover Date.     

闭排队网络中性能势与无穷小实现因子之间的关系

In this paper,the concept of the infinitesimal realization factor is extended to the parameter-dependent performance functions in closed queueing networks. Then the concepts of realization matrix (its elements are called realization factors) and performance potential are introduced,and the relations between infinitesimal realization factors and these two quantities are discussed. This provides a united framework for both IPA and non IPA approaches. Finally,another physical meaning of the service rate is given.