The combined effect of photodegradation and stress cracking in polystyrene

This work aims to analyze the effects of photodegradation on the stress cracking resistance of polystyrene. Injection moulded samples were exposed to the ultraviolet light for various times in the laboratory prior to solvent contact. The bars were then stressed in a tensile testing machine under the presence of butanol. During this period the stress relaxation was monitored and the ultimate properties were evaluated after selected periods of stress cracking. Complementary tests were done by size exclusion chromatography and by scanning electron microscopy. The results indicated that butanol causes significant modification in polystyrene, with extensive surface crazing as well as reduction in mechanical properties. This is intensified under higher mechanical stress. The previous degraded samples showed a higher level of stress relaxation and a greater loss in tensile strength in comparison to the undegraded ones. The synergist action of photodegradation and stress cracking in polystyrene may be a consequence of the chemical changes caused by oxidation like the formation of polar chemical groups and the reduction in molecular weight.     

助熔剂对Y3Al5O12：Ce荧光粉性能的影响

在还原气氛下采用高温固相反应法合成了白光LED用黄色荧光粉Y3Al5O12:Ce(YAG:Ce)研究了助熔剂对YAG：Ce荧光粉发光特性的影响，。XRD的测量结果表明加入合适的助熔剂有利于YAG:Ce荧光粉的晶化，并且不引入杂相，选择BaF2和H3BO3同时使用效果要好于单独使用一种助熔剂，助熔剂的加入可增大YAG：Ce荧光粉的激发和发射光谱强度，并能有效降低荧光粉的中心粒径（D50）控制粉体的粒径分布，适用于白光LED的制造。     

Chromatographic separation and mass spectrometric identification of positional isomers of polyethylene glycol-modified growth hormone-releasing factor (1-29)

A one-step chromatographic method capable of separating all isomers of polyethylene glycol (PEG)-growth hormone-releasing factor (GRF) (1-29) conjugates was developed. The unmodified GRF (1-29) and seven different isomers of PEG-GRF (1-29) conjugates were separated by using a simple reversed-phase HPLC method depending on the differences of hydrophobicity due to the number and site of PEG attachment. The PEGylation sites of all isomers of PEG-GRF (1-29) conjugates were identified by determining the molecular masses of the Lys-C digested fragments with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This study is a first report for the separation of all PEG-conjugate isomers and would be useful for further studies to find the promising conjugate by evaluating biological activity and stability of each isomer.     

Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.     

电化学方法获得具有表面增强拉曼活性镍电极的研究

利用纯电化学手段获得了具有较强表面增强拉曼活性的镍电极, 改进了原有的镍电极表面预处理方法. 结果表明, 在0.5 mol/L的NaClO4溶液中, 结合电化学阶跃技术和循环伏安技术, 可以得到合适的粗糙镍电极; 同时, 还得到了探针分子吡啶在该粗糙镍电极表面随电极电位变化的表面增强拉曼光谱(SERS), 此时谱峰强度获得了极大的增强; 还研究了粗糙镍电极的扫描电子显微镜(SEM)图像, 并估算出其SERS增强因子约为104, 此结果比以前的镍电极表面粗糙方法所能达到的增强因子高一个数量级.     

On the accuracy of correlation energy calculated by the correlation factor method: first- and second-row atoms

Summary The correlation energy of two- and four-isoelectronic series, a representative example for which the existing spin-density functionals fails, is calculated using the Colle and Salvetti method, considering mono- and multideterminantal wave functions. The results are in agreement with experimental data, and show the potentiality of this method when it is applied to wave functions including the most relevant configurational features. Also, results for the ionization energies and electron affinities of first- and second-row atoms are reported.     

尺寸排除色谱扩展因子的保留体积依赖性

尺寸排除色谱扩展函数的方差即尺寸排除色谱柱中单分散高分子峰的扩展因子,以窄分布聚苯乙烯标样用分子量分离和扩展效应同时标准的方法作了测量。简单的理论分析导出了一个方程以表示扩展因子的保留体积依赖性,其中包括四个具有明确物理意义并可实验测量的参数。该方程与实验数据符合得相当好,并解释了扩展因子极值出现的条件。     

关于冷原子吸收法测定尿汞影响因素探讨

介绍了对尿汞快速测定法的改进，用消泡剂磷三丁酸消除尿中泡沫，并讨论了尿汞测定的最佳条件，本法的相对标准偏差为４．８－９．０％，回收率９４－１０１％。     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.