Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Capacity factors and peak widths in the gradient elution reversed phase separation of high molar mass polystyrenes

Summary A simplex method for determining the constantsS andk _o from the equation lnk’=lnk _o−S ϕ (was developed and applied to the reversed phase separation of high molar mass polystyrenes using gradients of any curvature. Experimental retention times described using the equation had a standard deviation of 1.1%. The inclusion of a quadratic term in the equation was found to be unwarranted. BothS and lnk _o varied linearly with ln molar mass. The logarithm of peak width of an eluting polystyrene peak was found to be a linear function of the mobile phase composition at elution. The slope was equal toS.     

Chromatographic performance of deuterated solvents in reversed phase micro high performance liquid chromatography

The chromatographic performance of the deuterated solvents, CD₃OD and D₂O, has been investigated in reversed-phase micro high performance liquid chromatography. The chromatographic performance of CD₃OD is only slightly superior to that of CH₃OH. However, the performance of D₂ is significantly superior to that of H₂O, separation of aromatics being improved by about 30%. D₂ is a particularly powerful solvent for the separation iof deuterated and non-deuterated compounds.     

应变速率和电位对应力腐蚀裂纹扩展的影响

以滑移-溶解-再钝化模型为基础,推导出应力腐蚀裂纹扩展速率与裂尖应变速率和电位之间的理论公式.计算表明,在裂纹扩展速率与裂尖应变速率的关系曲线中有两个特征区域.裂纹扩展速率在区域I随裂尖应变速率增加而增大,而在区域II不随裂尖应变速率的改变而变化.用慢应变速率拉伸技术（SSRT）测量了304L不锈钢的裂纹增长速率.当电位控制在区域II的阳极区时,理论计算的裂纹扩展速率与实验得到的结果比较吻合.     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Errors involved in the activation energy calculated by integral methods when the frequency factor depends on the temperature ( A = A 0 T m)

The dependence of the frequency factor on the temperature (A=A ₀ T ^m) has been examined and the errors involved in the activation energy calculated from some integral methods without considering such dependence have been estimated. Investigated integral methods are the Coats-Redfern method, the Gorbachev-Lee-Beck method, the Wanjun-Yuwen method and the Junmeng-Fusheng method. The results have shown that the error in the determination of the activation energy calculated ignoring the dependence of the frequency factor on the temperature can be rather large and it is dependent on x=E/RT and the exponent m.     

Vibronic intensities in centrosymmetric coordination compounds of the rare earths Part II. A vibronic crystal field-closure-ligand polarisation model and applications to the PrCl6 and UBr6 complex ions in octahedral symmetry

A symmetry adapted formalism to evaluate the vibronic intensities induced by the ungerade vibrational modes in centrosymmetric coordination compounds of the rare earths is put forward and applied to several selected electronic transitions of the PrCl³⁻₆ and UCl²⁻₆ complex ions in octahedral symmetry. This current model is based upon a modified symmetry adapted version of the combined vibronic crystal field-closure-ligand polarisation approach. This model differs from that developed in Part I of this series, in that for the vibronic crystal field contribution to the total transition dipole moment, the closure procedure is employed rather than the utilisation of a truncated basis set for the central metal intermediate electronic states. A criterion is introduced to choose an appropriate set of phases for both the electronic and the vibrational coordinates so that to ensure the right sign for the interference term (which couples together both the vibronic crystal field and the vibronic ligand polarisation contributions to the total transition dipole moment). We have focused our attention on the modulation of the intermolecular force field and a version of a modified general valence force field has been adopted. The reasons for using this formalism rather than the superposition model (SM) are fully discussed in the text. Finally, it is shown that the agreement with experiment is satisfactory for most of the components of the transitions studied, despite the apparent simplicity of our model calculation. General master equations applicable to any f^N electronic configurations are derived to show the utility and flexibility of this current formalism.     

聚合物共混物脆韧转变性能研究 Ⅲ.分散相形态参数之间的关系

为了研究形态（特别是分散状态）对聚合物共混物韧性的影响，建立了准网络形态模型，定义了分散相分布系数（ξ，０＜ξ１），并给出其物理意义，推导了基体层厚度的计算公式，研究了形态参数的变化对基体层厚度的影响．对于常见的无规形态，ξ≈１．对于准网络形态，ξ＜１，并且不是常数．计算结果表明，减小ξ和分散相粒径及其分布、增大其体积分数有利于减小基体层厚度．从理论上证明了准网络形态比无规形态更有利于减小基体层厚度．     

Separation, identification, and interaction of heparin oligosaccharides with granulocyte-colony stimulating factor using capillary electrophoresis and mass spectrometry

A capillary electrophoresis (CE) method was developed for the separation of heparin oligosaccharides compatible to study the interactions between the oligosaccharides and granulocyte-colony stimulating factor (G-CSF). Unfractionated heparin was eliminitively degraded to heparin oligosaccharides by an endolytic heparinase. The degraded smaller oligosaccharides (M(r) < 1000) were baseline-separated by CE under a 50 mM phosphate buffer (pH 9.0) in 10 min. Standard heparin disaccharides and larger oligosaccharides (1000 < M(r) < 8000) were all separated under optimized separation conditions. Compared with standard heparin disaccharides, smaller oligosaccharides contained one nonsulfated, two monosulfated, and two disulfated disaccharides, but trisulfated disaccharides were not found. The smaller oligosaccharides were also identified and molecular mass was deduced by electrospray ionization-mass spectrometry (ESI-MS). Furthermore, interactions between G-CSF and the oligosaccharides were studied by using capillary zone electrophoresis (CZE) under the above separation conditions. It was found that larger oligosaccharides could interact with G-CSF while smaller oligosaccharides were not observed to bind to G-CSF under the experimental conditions. In conclusion, the purified heparinase could selectively degrade heparin into oligosaccharides and the interaction between G-CSF and heparin was correlated with the chain length of heparin.     

Chemical-effect variation of Kβ/Kα X-ray intensity ratios in 3d elements

Chemical effects on Kβ/Kα X-ray intensity ratios for some Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn compounds are studied experimentally. The X-ray spectra were measured by using a Si (Li) solid state detector with high resolution. The vacancies were produced by heavily filtered ²⁴¹Am gamma rays. It is found that the Kβ/Kα X-ray intensity ratios measured with compounds deviated up to 43% from the corresponding values of the pure elements. The values for pure elements are compared with the other experimental and with theoretical values.