Energy band modulation of GaAs/Al0.26Ga0.74As quantum well in 3D self-assembled nanomembranes

In this study, we investigate the modulation of energy band in 3D self-assembled nanomembranes containing GaAs/Al_0.26Ga_0.74As quantum wells (QWs). Photoluminescence (PL) characterizations demonstrate that the self-assembled structures have different optical transition properties and the modulation of the energy band is thus realized. Detailed spectral analyses disclose that the small strain change in structures with different curvatures cannot cause remarkable change in energy bands in Al_0.26Ga_0.74As layer. On the other hand, the optical transitions of GaAs QW layer is influenced by the strain evolution in term of light emission intensity. We also find the first order Stark effect in rolled-up nanomembrane with diameter of 150 μm, which is closely connected with the coupling effect between the deformation potential and the piezoelectric potential. Our work may pave a way for the fabrication of high performance rolled-QW infrared photo-detectors.     

Biomolecular Release Stimulated by Electrochemical Signals at a Very Small Potential Applied

DNA release electrochemically stimulated by applying ?10 mV on the modified electrode was studied. The release process was based on the local (interfacial) pH change produced upon H₂O₂ reduction electrocatalyzed by the immobilized microperoxidase‐11. SiO₂ nanoparticles attached to the electrode surface and functionalized with trigonelline and boronic acid species changed their electrical charge from positive to negative upon the interfacial pH change, thus allowing electrostatic adsorption of negatively charged DNA on the positive interface and then its repulsion/release from the negative interface. The loaded/released DNA molecules were labeled with a fluorescent dye to allow easy detection of the released DNA molecules. The important feature of the developed system is the controlled DNA release upon applying very small electrical potential on the modified electrode.     

利用相位步进脉冲消除探头13C NMR背景信号

由静态探头线圈外有机材料产生的¹³C NMR背景信号强度大,化学位移范围广（δ_C 20~250）,此背景信号在交叉极化实验中还可被增强,并随着样品信号的累积而累积,严重影响谱图分析.将相位步进脉冲引入交叉极化实验（称为PIPCP）中可以有效去除经交叉极化增强的¹³C NMR背景信号,但样品信号不受影响.这是由于经过相位步进脉冲后,线圈外相位严重畸变,而且线圈外锁定场强度急剧降低,来自探头材料的¹³C NMR背景信号无法有效地进行交叉极化.而对于被测样品甘氨酸来说,由于I核和S核之间强烈的偶极耦合作用,所加相位步进脉冲对锁定场强度的影响只有1.4%.     

液氮温区下应变式位移传感系统测量性能的研究

文中研究了一种应变式位移传感系统在室温和液氮温度下的静态传输特性。实验结果表明,该系统在液氮温区下具有良好的输出特性,系统非线性度低于1%,滞环率低于5%,其灵敏系数与温度相关,293K和77K温度下的灵敏系数分别为-0.3654mV/V/mm和-0.3886mV/V/mm。实验结果为该位移传感系统在低温环境中的应用提供了一定基础。     

基于最大信噪比测量两相流速度

为了克服噪声对信号的影响,提出一种利用最大信噪比和相关法测量两相流速度的方法.基于最大信噪比的信号分离方法是一种盲源信号分离方法,该算法利用统计独立信号完全分离时信噪比最大作为分离准则,它具有非常低的计算复杂度.这里首先利用盲源信号分离方法分别提取出上游和下游两相流信号,并据此求出两相流信号的相关函数曲线,由此求出信号的渡越时间,最后给出仿真实验的处理结果.实验结果表明该方法能够满足两相流速度的测量要求.     

光磁共振实验中扫场和水平场关系的探究

光泵磁共振实验中,在磁共振信号观察时,常常会有光抽运信号同时出现的现象,这严重影响了实验的有效观察和准确测量。本文阐述了取合适的扫场和水平场的大小的关系,从而避免实验过程中磁共振信号和光抽运信号的同时出现,以确保实验的精准。     

利用近红外光谱检测多层组织血氧饱和度的研究

利用近红外光谱无创检测生物组织血氧饱和状态,是一种极富研究和应用前景的检测技术,在临床检测中被广泛应用.但常规临床检测应用于指端仅反映局部血氧饱和度信息,在使用中具有局限性,信号的可信度也存在质疑.该文提出了一种采用反射式脉搏血氧饱和度检测技术检测生物多层组织氧合状况的新方法,该方法通过调节入射光强以适应解剖学中生物组织多层结构的检测.应用该方法针对手指结构的实验结果表明,随着入射光强的改变,反映血氧饱和状态的光电脉搏波信号有显著变化.结合手指解剖学分析表明,光电脉搏波信号的变化与手指的多层面组织结构相对应,反映不同层面血氧饱和状态.这一特点表明,通过此法可以针对生物组织的多层结构进行测量.     

Performance of a 4×10 Gbit/s optical time domain multiplexed system using SMZ switching

Optical time division multiplexing (OTDM) is emerging and promising alternative for future high-speed photonic networks because of its ability to accommodate higher bit rate and flexible bandwidth. Among other factors the performance of an OTDM system largely depends upon the switching characteristics of a de-multiplexer (DEMUX). Symmetric Mach-Zehnder (SMZ) have been found to be most suitable than all the available de-multiplexing switches because of compact size, thermal stability, and low power operation. In this paper, we simulate four-channel OTDM systems (all channel multiplexer (MUX) and DEMUX) with a Mach-Zehnder modulator and SMZ DEMUX to investigate the impact of signal power, pulse width and control signal power on BER.     

Digital pulse shape discrimination methods for n-γ separation in an EJ-301 liquid scintillation detector

A digital pulse shape discrimination system based on a programmable module NI-5772 has been established and tested with an EJ-301 liquid scintillation detector. The module was operated by running programs developed in Lab VIEW, with a sampling frequency up to 1.6 GS/s. Standard gamma sources22 Na,137Cs and60 Co were used to calibrate the EJ-301 liquid scintillation detector, and the gamma response function was obtained. Digital algorithms for the charge comparison method and zero-crossing method have been developed. The experimental results show that both digital signal processing(DSP) algorithms can discriminate neutrons from γ-rays. Moreover,the zero-crossing method shows better n-γ discrimination at 80 ke Vee and lower, whereas the charge comparison method gives better results at higher thresholds. In addition, the figure-of-merit(FOM) for detectors of two different dimensions were extracted at 9 energy thresholds, and it was found that the smaller detector presented better n-γseparation for fission neutrons.     

延时法测量条纹相机μs档扫描非线性

为实现μs档条纹相机扫描非线性标定,建立了基于延时可调信号源和外触发激光器的条纹相机μs档扫描非线性标定系统,弥补了标准具法的不足。系统通过延时值的递增,得到条纹相机扫描速度在全扫程的变化。系统中时间关系抖动来源主要是测试设备延时抖动和条纹相机触发延时抖动。时间抖动测试与分析显示,条纹相机延时抖动±0.6ns,测试设备延时抖动±0.3ns,系统总时间抖动±0.7ns。系统时间抖动会造成最终时间轴信息的起伏。大量数值模拟分析表明,时间轴起伏对系统时间抖动的影响±2ns,在可以接受的范围内。因此,该系统能够胜任条纹相机μs扫程时间信息的测量标定。