基于剪切效应纤维梁单元的结构非线性有限元数值模拟

基于Euler-Bernoulli梁理论的经典纤维模型忽略了剪切变形给截面带来的影响,为了得到更加精确的梁单元模型,该文基于考虑剪切效应的纤维梁单元,根据Timoshenko梁理论,推导了该纤维梁单元的刚度矩阵,并结合弹塑性增量理论,同时考虑了几何非线性和材料非线性的双重影响,建立了压弯剪复杂应力状态下结构非线性有限元...     

压电弯曲元的夹层梁解析模型

压电弯曲元是一类传感和作动器件,已得到广泛的应用．基于一阶剪切变形理论发展了压电弯曲元夹层梁解析模型,对梁截面采用统一转角并将耦合电势沿厚度的分布假设为二次函数,进一步修正了横向剪应变对电位移的影响．以弯曲元简支梁自由振动为例进行数值分析,解析模型解与二维精确解相比具有良好的精度,为分析弯曲元动力机电响应提供了良好的解析模型．     

Nonequilibrium Thermodynamics of Polymeric Liquids via Atomistic Simulation

The challenge of calculating nonequilibrium entropy in polymeric liquids undergoing flow was addressed from the perspective of extending equilibrium thermodynamics to include internal variables that quantify the internal microstructure of chain-like macromolecules and then applying these principles to nonequilibrium conditions under the presumption of an evolution of quasie equilibrium states in which the requisite internal variables relax on different time scales. The nonequilibrium entropy can be determined at various levels of coarse-graining of the polymer chains by statistical expressions involving nonequilibrium distribution functions that depend on the type of flow and the flow strength. Using nonequilibrium molecular dynamics simulations of a linear, monodisperse, entangled C₁₀₀₀H₂₀₀₂ polyethylene melt, nonequilibrium entropy was calculated directly from the nonequilibrium distribution functions, as well as from their second moments, and also using the radial distribution function at various levels of coarse-graining of the constituent macromolecular chains. Surprisingly, all these different methods of calculating the nonequilibrium entropy provide consistent values under both planar Couette and planar elongational flows. Combining the nonequilibrium entropy with the internal energy allows determination of the Helmholtz free energy, which is used as a generating function of flow dynamics in nonequilibrium thermodynamic theory.     

基于布拉格光栅的边坡监测实验研究

提出了一种基于分布式光纤光栅的边坡监测与报警系统.根据强度折减法,利用ANSYS软件分析出边坡的软弱面及滑体所在的具体位置,从而在该处安装经过特殊封装的拉线式光纤光栅位移传感器.滑体的位移通过拉线转换为作用在光栅上的应力,而光纤光栅反射波长与应变具有良好的线性关系,因此通过检测光栅反射光的中心波长的偏移量,就可以解调出...     

大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5的流变行为研究

采用静态拉伸方法在连续升温条件下动态地测量了大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5（Vit1）的黏度随温度的变化关系.在应变速率与温度的关系曲线中，观测到了与玻璃转变和晶化过程相联系的多个应变速率峰.在玻璃转变温度Tg以上，大块金属玻璃Zr41Ti14Cu12.5Ni10Be22.5的过冷液体呈现Newton流体特征，其黏度与温度的关系符合Vogel Fulcher-Tammann (VFT)关系式，拟合得到脆度D*＝36，VFT温度T0＝319K，脆度参数m＝30，这说明Zr41T 关键词： 大块金属玻璃 应变速率 剪切黏度 自由体积     

变分原理分析开裂简支箱梁剪力滞效应

变分原理通常应用于箱形截面梁剪力滞效应弹性分析,本文基于换算截面法,运用变分原理推导了预应力混凝土简支箱梁均布荷载作用、钢筋混凝土简支箱梁集中荷载作用的剪力滞系数计算公式,考虑了混凝土开裂对箱梁剪力滞效应的影响,并与试验结果和规范方法进行了对比分析。变分原理分析开裂混凝土箱梁剪力滞效应方法力学概念明确,是其弹性分析适用范围的拓展,亦可推广应用到混凝土连续箱梁开裂后的剪力滞效应分析,具有广阔的应用前景。     

磁流变弹性体若干物理量的数值分析

应用有限元方法,考虑了颗粒的磁化饱和过程与非线性磁化过程,计算得到了磁流变弹性体中的磁场分布,进而研究了在不同磁场大小、不同颗粒体积比浓度下磁流变弹性体在成链方向的相对磁导率,计算结果和实验结果取得了一致。利用Maxwell应力张量,计算了磁场引起的磁流变弹性体的附加剪切模量。分析了颗粒体积比浓度、外加磁场对磁流变弹性体的磁致剪切模量的影响。研究了颗粒为旋转椭球形状时,颗粒的放置方式与其长短轴之比对磁流变弹性体的磁致剪切模量的影响。计算结果表明,磁流变弹性体的相对磁导率随颗粒体积比浓度的增大而增大,随磁场强度的增大而减小,颗粒的形状和放置方式对磁流变效应有很大的影响。     

黏滞等离子体中双撕裂模不稳定性的数值模拟研究

本文采用磁流体力学模型,数值研究了平板位形下双撕裂模线性增长率关于等离子体电阻η和黏滞v的定标关系.结果表明,对于有理面间距较大的情况,线性增长率关于电阻和黏滞的指数定标率随着黏滞的增加逐渐由γ∝ η3/5v0的定标变化到γ∝η5/6v-1/6的定标;而对于有理面间距较小的情况,其指数定标率随着黏性的增加从γ∝η 1/3 v0的定标逐渐变化到γ∝η2/3v-1/3的定标.本文还给出了初始阶段对称的双撕裂模的非线性演化,发现在非线性阶段对称的双撕裂模将转化为反对称的双撕裂模,并解释了相应的物理机理.     

Investigation of Viscosity and Density Versus Temperature in Comparison with 1H Nmr Relaxation time Results for O,M-, P-Xylenes and α -,β-, γ - Picolines

The paper presents the results of density and viscosity measurements in liquid derivatives of benzene and pyridine, well purified, degassed or aerated, depending on temperature, in the whole liquidity range. Gaseous admixtures were found to affect the viscosity of liquids. From one to three Arrhenius regions were observed, depending on the structure and orientational freedom of the molecules. the results are discussed on the background of 1H NMR relaxation time studies with regard to the effect of dipole interactions on the structure of close packing.     

Sound transmission from stiffened double laminated composite plates

An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.