Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.     

Iridium mediated methyl and phenyl C-H activation of 2-(arylazo)phenols. Synthesis, structure, and spectral and electrochemical properties of some organoiridium complexes

Reaction of 2-(2′,6′-dimethylphenylazo)-4-methylphenol with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords an organoiridium complex 5, where the 2-(2′,6′-dimethylphenylazo)-4-methylphenol is coordinated to iridium, via C-H activation of a methyl group, as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. A similar reaction carried out in toluene affords complex 5 along with a similar complex 7, where a chloride is coordinated to iridium instead of the hydride. Reaction of 2-(2′-methylphenylazo)-4-methylphenol with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords an organoiridium complex 12, where the 2-(2′-methylphenylazo)-4-methylphenol is coordinated to iridium, via C-H activation at the ortho position of the phenyl group in the 2′-methylphenylazo fragment, as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. A similar reaction carried out in toluene affords a complex 12 along with a similar complex 13, where a chloride is coordinated to iridium instead of the hydride. Structures of complexes 5, 12 and 13 have been determined by X-ray crystallography. In all these complexes, the two triphenylphosphines are trans. All these complexes show intense MLCT transitions in the visible region. Cyclic voltammetry on all the complexes shows an Ir(III)-Ir(IV) oxidation within 0.60-0.73 V vs. SCE, followed by an oxidation of the coordinated 2-(arylazo)phenolate ligand within 1.08-1.39 V vs. SCE. A reduction of the coordinated 2-(arylazo)phenolate ligand is observed within −1.10 to −1.26 V vs. SCE.     

η6-苊烯三羰基铬配合物的合成、结构及光谱性质研究

采用苊烯配体与三胺基三羰基铬在四氢呋喃中回流反应,合成了η6-苊烯三羰基铬配合物.通过元素分析、IR、1HNMR、13CNMR、MS和X射线单晶衍射对其结构进行了表征,比较了标题配合物与其自由配体的光物理行为.晶体结构分析表明,标题配合物属单斜晶系,空间群P21/c,Z=4,a=0.8719(7)nm,b=1.2436(10)nm,c=1.1504(9)nm,β=111.835(13)°,Cr(CO)3基团可与苊烯配体中的2个苯环中的任意一个配位,形成2个异构体(R,S),并以1:1的比例在其晶胞单元中反向面对面堆积,这种异构体共存于晶体中归属于Cr(CO)3基团在配体芳环之间的配位移动重排(IRHRs).     

固定波长同步荧光光谱参数的理论计算

基于荧光激发光谱和发射光谱对波长呈高斯分布的设定,本文推导出固定波长同步荧光光谱峰峰值位置、相对强度和半峰宽度等3个主要光谱参数的理论计算式。所提出的计算式应用于若干荧光物质光谱参数的计算,并和实测值、文献计算值作了对照。结果表明,和文献计算方法相比,本法与所研究物质的实际光谱参数较为接近,可为固定波长同步荧光光谱参数的理论计算提供一有效方法。     

Untersuchungen zurFriedel-Crafts-Reaktion. XVI. Darstellung isomerer 2-Acyl- und 3-Acyl-4-methoxyphenole

Acylation of 4-methoxy phenol according toFriedel andCrafts, as well as the rearrangement of its esters according toFries lead always to 2-acyl-4-methoxy phenols or to their demethylated compounds. The unknown 3-acyl-4-methoxy phenols were prepared in two steps: First, the ester is acylated with the corresponding acyl chloride and SnCl₄ in nitromethane. In the second step the resulting ketoesters are hydrolysed. This is a general method. The yields ofmeta-acylphenols are between 40 and 90%. The isomeric 2-acyl-4-methoxy-phenols which were partly unknown or accessible only in low yields have also been prepared for comparative spectral studies (UV, IR, NMR, MS) ofortho- andmeta-acylphenols.

     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Pretreatment of swine wastewater using anaerobic filter

Efforts were made to assess the efficiency of an anaerobic filter packed with porous floating ceramic media and to identify the optimum operational condition of anaerobic filter as a pretreatment of swine wastewater for the subsequent biological removal of nitrogen and phosphorus. A stepwise decrease in hydraulic retention time (HRT) and an increase in organic loading rate (OLR) were utilized in an anaerobic filter reactor at mesophilic temperature (35°C). The optimum operating condition of the anaerobic filter was found to be at an HRT of 1 d. A soluble chemical oxygen demand (COD) removal efficiency of 62% and a total suspended solids removal efficiency of 39% at an HRT of 1 d were achieved with an OLR of 16.0 kg total COD/(m³·d), respectively. The maximum methane production rate approached 1.70 vol of biogas produced per volume of reactor per day at an HRT of 1 d. It was likely that the effluent COD/total Kjeldahl nitrogen ratio, of 22, the COD/total phosphorous ratio of 47, and the high effluent alkalinity >2500 mg/L as CaCO₃ of the anaerobic filter operated at an HRT of 1 d was adequate for the subsequent biological removal of nitrogen and phosphorus.     

Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.     

Copper(II), nickel(II) and cobalt(II) complexes of 4-cyanobenzonic acid: syntheses, crystal structures and spectral properties

Three new metal complexes, Cu(4-Hcba)₂(4-cba)₂(Py)₂ (4-Hcba=4-cyanobenzoic acid) 1 and M[H(4-cba)₂]₂(Py)₂ (M=Ni 2, Co 3), have been prepared by the treatment of 4-Hcba with the respective metal nitrate M(NO₃)₂ (M=Cu, Ni, Co) in the presence of pyridine (Py). Single-crystal X-ray diffraction analyses (3 is isostructural to 2) show that the obtained complexes are of isolated mononuclear and the metal atoms have distorted octahedral coordination environment. Two different types of intramolecular hydrogen bonds exist: asymmetrical O–HO for 1 and symmetrical OHO for 2 and 3. The crystal packing between the molecular complexes is controlled mainly by T-shaped C–Hπ interactions between pyridine and phenyl rings. Preliminary discussions on IR, UV–VIS and fluorescent spectra have also been carried out.