Two simple methods for overall determination of mobility in dynamic speckle patterns

In this work, we present two simple methods to quantify the mobility of dynamic speckle patterns. The first method is based on the averaged pixel intensity differences between subsequent frames, while the second simply counts the fraction of pixels whose intensity changes with time in more than a certain quantity related to background noise. We have analyzed the applicability of these methods to different specimens (inorganic and biological) and compared the results to check their validity.     

Real-time visualisation of deformation fields using speckle interferometry and temporal phase unwrapping

A real-time system for analysing data from speckle interferometers, and speckle shearing interferometers, has been developed. Interferograms are continuously recorded by a digital camera at a rate of 60 frames s⁻¹ with temporal phase shifting carried out at the same rate. The images are analysed using a pipeline image processor. With a standard 4-frame phase-shifting algorithm (phase steps of π/2), wrapped phase maps are calculated and displayed at 15 frames s⁻¹. These are unwrapped using a temporal phase unwrapping algorithm to provide a real-time colour-coded display of the relevant displacement component. Each camera pixel (or cluster of pixels) behaves in effect as an independent displacement sensor. The reference speckle interferogram is updated automatically at regular user-defined intervals, allowing arbitrarily large deformations to be measured and errors due to speckle decorrelation to be minimised. The system has been applied to the problem of detecting sub-surface delamination cracks in carbon fibre composite panels.     

Determination of strain and stress distribution on shearwalls by using the speckle photography technique

Speckle photography (SP) is a powerful tool that is adequate to determine small displacements in micrometer range. This information shows other characteristics of structure deformation under loads and can be determined as stress and strain distribution. In this paper we present the results of the application of the SP technique used to study the behaviour of discontinuities in a shearwall model. These structural elements are very important to the stability of buildings. The displacement whole field around the discontinuities and loading points was determined using the pointwise method. This allows us to determine stress distribution at the point of interest by means of the suitable equations. We also present the stress distribution obtained through the finite element method in order to compare the results obtained by means of these two techniques. Good correspondence was found between the displacements determined by both techniques (r=0.982) and also between the stress values we obtained.     

正交小波变换在散斑图象相关计算中的应用

本文在散斑图象的相关计算处理技术中引入了二维离散正交小波变换,详细叙述了其原理,给出了实验计算的结果,并与原始的空域相关计算进行了比较,从中可以看出:无论是相关计算精度,还是相关搜索速度,小波相关都具有明显的优越性.     

A full-field approach for the elastic characterization of anisotropic materials

In the paper a procedure is described whereby the characterization of isotropic and anisotropic laminae is carried out by full-field measurement of the surface rotations under proper flexural loads. The analytic formulation does not necessarily imply a numerical calibration and the elastic constants are determined by integrating the whole experimental data on the surface of the specimen. Measurements were carried out by phase-stepped speckle interferometry using a shearometer based on Michelson design. The experimental instrumentation, including the loading device, and the procedures for the manipulation of experimental data are detailedly described; experimental results obtained on a steel specimen and a composite laminate are also reported.     

Metrology in Iceland: a status report

 The metrology system in Iceland has been reviewed and developed in the light of the increased needs of industry and other users of the system, in some cases to comply with the requirements of the agreement between the European Union and the European Economic Area which the Icelandic government signed in 1992. After a short historical review, the current legislation is explained, the metrological infrastructure is described, and the plans for the coming years are discussed. Received: 27 November 1995 Accepted: 18 December 1995     

Effective radiating area and beam non-uniformity ratio of ultrasound transducers at 5 MHz, according to IEC 61689:2007

This paper discloses results of measuring the effective radiating area (A_ER) and the beam non-uniformity ratio (R_BN) for US transducers at 5.0 MHz. Measurements were carried out at Laboratory of Ultrasound of the Brazilian National Institute of Metrology, Standardization, and Industrial Quality. As reliability proof of system’s adequacy, uncertainties were assessed. The calculation protocol was developed based on standard IEC 61689:2007. Type A uncertainty was estimated after four repetitions of the full procedure for the determination of A_ER and R_BN, and Type B uncertainty was estimated from the mathematical model for both calculations, obtained from IEC 61689:2007 and the guide to the expression of uncertainty in measurement. The procedure presented herein represents the state of the art regarding metrology for testing therapeutic ultrasound devices, and its application results in fundamental aspects to support their evaluation regarding quality assurance, for instance, for a certification process due safety and performance.     

Blood flow evaluation in high-frequency, 40 MHz imaging: A comparative study of four vector velocity estimation methods

Ultrasonic imaging is often used to estimate blood flow velocity. Currently, estimates are carried out using Doppler-based techniques. However, there are a number of shortcomings such as the limited spatial resolution and the inability to estimate longitudinal flows. Thus, alternative methods have been proposed to overcome them. Difficulties are notably encountered with high-frequency imaging systems that use swept-scan techniques. In this article, we propose to compare four vector velocity estimation methods that are complementary to Doppler, focusing on 40 MHz, high-frequency imaging. The goal of this study is to evaluate which method could circumvent the limitations of Doppler methods for evaluation of microcirculation, in the vessels having diameter on the order of 1 mm. We used two region-based approaches, one decorrelation-based approach and one spatiotemporal approach. Each method has been applied to seven flow sequences with various orientations and mean velocities. Four sequences were simulated with a system approach based on a 3D set of moving scatterers. Three experimental sequences were carried out by injecting blood-mimicking fluid within a gelatin phantom and then acquiring images with Visualsonics, Vevo 660 system. From velocity estimates, several performance criteria such as the normalized mean error or the normalized mean standard deviation were defined to compare the performance of the four estimators. The results show that region-based methods are the most accurate exhibiting mean errors less than 10% and mean standard deviation less than 13%. However, region-based approaches are those that require the highest calculative cost compared to the decorrelation-based method, which is the fastest. Finally, the spatiotemporal approach appeared to be a trade-off in terms of computational complexity and accuracy of estimates. It provides estimates with errors less than 10% for mean velocity and the CPU time is approximately 17 s for a ROI of size 40 * 80 pixels.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part II

This is the part II of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS–MS) detection in LC (as opposed to the “conventional” detectors). The Part II starts with briefly introducing the main quantitation methods and then addresses the performance related to quantification: linearity of signal, sensitivity, precision, trueness, accuracy, stability and measurement uncertainty. The last section is devoted to practical considerations in validation. With every performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to handle it, specifically in the case of LC–MS methods.