利用电子散斑相移技术测量物体三维面形的方法

为了获得准确的面形测量,提出了一种相移电子散斑干涉技术测量物体面形的测量方法.利用电子散斑干涉产生载波条纹,该载波条纹受到物体表面高度的调制变得弯曲,引起载波条纹相位的变化,可运用相移技术提取物体的相位信息,最后根据高度和相位之间的关系得到物体的面形.介绍了该方法的原理,利用该方法对球冠物体进行了面形测量,证明该方法测量物体面形是可行性的.由于是采用散斑干涉的方法产生干涉条纹,因此该方法测量物体面形具有灵敏度高的优点.     

Study of a vibrating plate: comparison between experimental (ESPI) and analytical results

Real-time electronic speckle pattern interferometry (ESPI) was used for tuning and visualization of natural frequencies of a trapezoidal plate. The plate was excited to resonant vibration by a sinusoidal acoustical source, which provided a continuous range of audio frequencies. Fringe patterns produced during the time-average recording of the vibrating plate—corresponding to several resonant frequencies—were registered. From these interferograms, calculations of vibrational amplitudes by means of zero-order Bessel functions were performed in some particular cases. The system was also studied analytically. The analytical approach developed is based on the Rayleigh–Ritz method and on the use of non-orthogonal right triangular co-ordinates. The deflection of the plate is approximated by a set of beam characteristic orthogonal polynomials generated by using the Gram–Schmidt procedure. A high degree of correlation between computational analysis and experimental results was observed.     

亚千赫兹精度的腔增强分子饱和吸收光谱

饱和吸收光谱法常被用于原子和分子跃迁的亚多普勒测量。光学谐振腔除了可增强有效吸收光程,还能够增加腔内的激光功率来饱和非常弱的分子振转跃迁.本文利用精细度达120000的谐振腔,通过腔增强光谱、腔衰荡光谱、噪声免疫腔增强光外差分子光谱这三种不同的腔增强方法,测量1.4μm处的C_2H_2分子兰姆凹陷.采用不同的腔增强方法确定吸收谱线中心,均给出了亚千赫兹的统计不确定度.并分析比较了不同方法的灵敏度和精度,噪声免疫腔增强光外差分子光谱是最灵敏的方法,但如果期望利用它实现亚千赫兹精度的计量应用,还需要对该方法中的系统误差进行更多的研究.     

The Surface Analysis Working Group at the Consultative Committee for Amount of Substance,Metrology in Chemistry and Biology: A successful initiative by Martin Seah

Dr Martin Seah, NPL, was the initiator, founder, and first chairman of the Surface Analysis Working Group (SAWG) at the Consultative Committee for Amount of Substance, Metrology in Chemistry and Biology (CCQM) at the Bureau International des Poids et Mesures (BIPM), the international organization established by the Metre Convention. This tribute letter summarizes his achievements during his chairmanship and his long-running impact on the successful work of the group after his retirement.     

Metrological value of participating in interlaboratory comparisons

Quality of chemical measurement is a central issue nowadays with social, political and economic implications. This paper aims to describe how interlaboratory comparisons (ILCs) can contribute towards better quality of chemical measurements. The importance of ILCs as well as the different types and the requirements for proper organization of ILCs are explained. The international structure and organization of metrology is given, highlighting the activities related to chemical measurements. Particularly the use of ILCs in the service of metrology in chemistry is highlighted. A very important discussion concerning ILCs is how they can (or cannot) establish traceability. The view of the authors is that traceability cannot, as such, be established through ILCs. On the other hand, participation in ILCs can clearly support the claims for quality measurements, as ILCs are experimental and objective demonstrations of measurement capability.     

Comment on the paper: H.-E. Hwang, P. Han, Theoretical analysis for surface tilt and translation detection based on speckle photography in the Fresnel domain, Opt. Commun. 282 (2009) 351-354

In a recent paper [H.-E. Hwang, P. Han, Opt. Commun. 282 (2009) 351] a speckle based metrology system is proposed which it is claimed provides significant advantages over existing systems. In this paper, we show that the discussion presented in [H.-E. Hwang, P. Han, Opt. Commun. 282 (2009) 351] is deficient, and that several of the statements made are incorrect and/or misleading.     

In situ calibration of a Michelson type, speckle-shearing interferometer: Wobbling mirror effect

In situ calibration of piezoelectric transducers in a phase stepping, Michelson type, speckle-shearing interferometer can be affected by mirror wobbling introduced by the transducers. When this happens, a modulation of the curves employed for calibration can be readily detected in imaging systems with large apertures. A calibration method that takes into account the modulation of these curves is, therefore, essential to insure the required regularity of the phase steps. A computer model of speckle-shearing interferometry is used to deal with piezoelectric non-linearities and mirror wobbling in the interferometer, and to show how the calibration curves are affected when both phenomena are present. Computer simulated and experimental results validate the calibration technique advanced here.     

Speckle suppression and contrast enhancement in reconstruction of freehand 3D ultrasound images using an adaptive distance-weighted method

In three-dimensional (3D) freehand ultrasound (US), reconstructing a set of B-scans into a regular voxel array is the key procedure for consequent visualization and analysis. This paper presents a new adaptive interpolation algorithm for computing the voxel array to suppress speckle noises and enhance contrast. The local statistics of homogeneous regions including mean and variance were measured and the ratio of variance to mean was used as homogeneity criteria. For the computation of each voxel, the interpolation method was adaptively determined with respect to its local statistics. If the neighbouring pixels of a voxel satisfied the homogeneity criterion, its value was computed with an arithmetic mean filter. Otherwise, the voxel was probably locating in an inhomogeneous region and an adaptive distance-weighted (ADW) interpolation method was employed to compute its value. A resolution phantom and a subject’s forearm were reconstructed using the proposed algorithm and two other well-known methods - conventional distance-weighted (DW) and voxel nearest neighbourhood (VNN) interpolations. The comparison results demonstrated that the adaptive interpolation algorithm was able to suppress speckles, preserve edges and enhance contrast effectively for the volume reconstruction.     

Displacement measurements in structural elements by optical techniques

Speckle metrology and holographic interferometry (HI) have been used in several civil engineering applications. We present the results obtained by applying speckle photography (SP) to the study of two quadratic shearwalls with different boundary conditions, and the potential of the technique in the study of this kind of structures is described. The analysis of Young's fringes obtained with this technique at certain points on each shearwall provides the whole field of displacement measurements. HI has been used to measure the three components of absolute displacement, verifying that the bulging phenomenon does not affect the in-plane components when the applied load remains on the same plane as the shearwall. A qualitative analysis is carried out following an electronic speckle pattern interferometry (ESPI) technique. The results obtained by optical techniques are compared to the numerical results obtained by the finite element method (FEM), finding good correlation between them in all the cases.