基于STAF自动化测试框架的研究与应用

随着软件功能实现技术越来越复杂,软件测试领域迫切需要具有自动化、多平台、开销小的自动化测试框架,STAF的出现很好地解决了这个问题。提出一种基于STAF的自动化测试框架,并进行模拟实践,采用ATT工具设计自动测试引擎,通过模拟实验测试,构建基于STAF的自动化测试框架。测试结果显示：在不同环境下,该框架均具有软件测试自动化程度高、测试效率高,易于管理、维护和可扩展等优点。     

惯性约束聚变点火靶候选靶丸特点及制备研究进展

获得能量增益实现点火是目前激光惯性约束聚变领域研究的主要方向和标志性成果. 在点火靶的设计中有多种可能的候选靶丸,包括碳氢掺杂锗、铍掺杂铜、聚酰亚胺、 碳化硼和金刚石靶丸,其中碳氢和铍靶丸是最主要的候选靶丸.文中主要总结了几种候选靶丸的优缺点及目前研制现状.在国外,碳氢靶丸是目前点火靶的首选靶丸. 与铍靶丸相比,不存在明显的微结构缺陷,制备较容易;靶丸光学透明, 适宜于燃料分层和表征;靶丸在制备上更容易达到点火靶要求. 美国的碳氢点火靶靶丸基本达到了设计要求,这些要求包括几何尺寸、壳层密度、 壳层缺陷、表面光洁度、掺杂水平和杂质含量等.我国的点火靶靶丸研究还处在起步阶段.     

甲烷-空气最小点火能量预测理论模型

 最小点火能是可燃气体危险性辨识的重要参数之一。为从理论上得到混合气体的最小点火能,建立了可燃气体火花点火的物理模型,给出了通过数值模拟得到的可燃气体最小点火能量的预测方法,采用该方法得到了甲烷-空气混合气火花点火的临界温度及最小点火能量。结果表明：甲烷-空气混合气的最小点火能量与浓度呈U型关系,浓度为8.5%的预混气的最小点火能量计算值为0.39 mJ,与实验值0.4 mJ吻合较好。     

Investigation and optimization of the recovery of coal fines using oil agglomeration process: Use of waste oils from different sectors

The high cost of the bridging liquid subdues the implementation and commercialization of oil agglomeration process. To overcome this problem, waste oils from different sectors were used in this present study. The performance of the process was assessed based on the responses like ash rejection and organic matter recovery. The aim of the present study was to investigate the usage of waste oils from different sectors and to optimize and analyze the behavioral pattern showcased by different variables (pulp density, oil dosage, agglomeration time and oil type) using response surface methodology (Box-Behnken design). Experimental investigation shows that the optimum pulp density, oil dosage, agglomeration time and oil type condition obtained as 3%, 15%, 15?min and waste engine oil, respectively. At optimum condition, the % ash rejection and % organic matter recovery obtained as 63.94% and 81.8%, respectively.     

悬浮RDX炸药粉尘爆轰的数值模拟

用两相流模型对悬浮RDX炸药粉尘爆轰波进行了数值模拟。RDX炸药颗粒在爆轰波阵面后的高温高速气流中加速并升温,颗粒表面发生熔化。参考液滴在高速气流作用下剥离的效应,假设炸药熔化部分在高速气流的作用下发生剥离,破碎成极小的颗粒,瞬时发生分解反应,释放出能量支持爆轰波传播。数值模拟了在不同粒径和浓度的悬浮RDX炸药粉尘中爆轰波的发展与传播过程,得到了爆轰波流场中气-固两相的物理量分布,并确定了爆轰波参数。在较低的RDX粉尘浓度条件下,爆轰波阵面压力的峰值曲线出现振荡。当RDX粉尘浓度在80~150 g/m3时,数值模拟得到的爆轰波阵面压力峰值曲线的振荡是规则的;当RDX粉尘浓度为70 g/m3时,爆轰波阵面压力峰值曲线出现不规则振荡。     

激光核聚变与高功率激光:历史与进展

回顾激光聚变近50年来的发展历程,评述聚变物理与高功率激光驱动器的研究进展,展望聚变能源未来前景.     

线性唯象传热定律下光驱动发动机的最优路径

以存在热漏、摩擦等不可逆性,以双分子反应系统2SO3FS2O6F2为工质的光驱动发动机为研究对象,考虑工质与环境之间传热服从线性唯象传热定律[q∝Δ(T-1)],分别以输出功最大和熵产生最小为目标对整个循环活塞运动的最优路径进行研究.利用最优控制理论得出了活塞运动路径及工质温度的最优构型,给出了最优构型的数值算例,并与牛顿传热定律[q∝Δ(T)]下的最优构型进行了比较.     

Precise and global identification of phospholipid molecular species by an Orbitrap mass spectrometer and automated search engine Lipid Search

In the present research, we have established a new lipidomics approach for the comprehensive and precise identification of molecular species in a crude lipid mixture using a LTQ Orbitrap mass spectrometer (MS) and reverse-phase liquid chromatography (RPLC) combination with our newly developed lipid search engine “Lipid Search”. LTQ Orbitrap provides high mass accuracy MS spectra by Fourier-transform (FT) mass spectrometer mode and can perform rapid MSⁿ by ion trap (IT) mass spectrometer mode. In this study, the negative ion mode was selected to detect fragment ions from phospholipids, such as fatty acid anions, by MS2 or MS3. We selected the specific detection approach by neutral loss survey-dependent MS3, for the identification of molecular species of phosphatidylcholine, sphingomyelin and phosphatidylserine. Identification of molecular species was performed by using both the high mass accuracy of the mass spectrometric data obtained from FT mode and structural data obtained from fragments in IT mode. Some alkylacyl and alkenylacyl species have the same m/z value as molecular-related ions and fragment ions, thus, direct acid hydrolysis analysis was performed to identify alkylacyl and alkenylacyl species, and then the RPLC–LTQ Orbitrap method was applied. As a result, 290 species from mouse liver and 248 species from mouse brain were identified within six different classes of phospholipid, only those in manually detected and confirmed. Most of all manually detected mass peaks were also automatically detected by “Lipid Search”. Adding to differences in molecular species in different classes of phospholipids, many characteristic differences in molecular species were detected in mouse liver and brain. More variable number of saturated and monounsaturated fatty acid-containing molecular species were detected in mouse brain than liver.     

Biofuels–Renewable Energy Sources: A Review

Biodiesel is biodegradable and nontoxic, and it significantly reduces toxic and other emissions when burned as a fuel. The advantages of biodiesel as diesel fuel are its portability, ready availability, renewability, higher combustion efficiency, non-toxicity, higher flash point, and lower sulfur and aromatic content, higher cetane number, and higher biodegradability. The major disadvantages of biodiesel are its higher viscosity, lower energy content, higher cloud point and pour point, higher nitrogen oxide (NO_x) emissions, lower engine speed and power, injector coking, engine compatibility, high price, and greater engine wear. The technical disadvantages of biodiesel/fossil diesel blends include problems with fuel freezing in cold weather, reduced energy density, and degradation of fuel under storage for prolonged periods. The sources of biodiesel are vegetable oils and fats. The direct use of vegetable oils and/or oil blends is generally considered to be unsatisfactory and impractical for both direct injection and indirect type diesel engines because of their high viscosities and low volatilities injector coking and trumpet formation on the injectors, higher level of carbon deposits, oil ring sticking, and thickening and gelling of the engine lubricant oil, acid composition. Biodiesel is obtained by transesterifying triglycerides with methanol. A popular variation of the batch transesterification process which needs high alcohol/acid ratio (several separation problems and high corrosivity and toxicity) is the use of continuous stirred tank reactors in series. This continuous process is heterogeneous and is based on reactive distillation. The key factor is the selection of the right and effective solid catalyst which leads to reduction of energy consumption and investments at all.