Phenanthrene removal in unsaturated soils treated by electrokinetics with different surfactants—Triton X-100 and rhamnolipid

In this study, the remediation performance of electrokinetic (EK) technology integrated with different surfactants for removing phenanthrene from unsaturated soils was investigated. A synthetic surfactant (Triton X-100) and a biosurfactant (rhamnolipid) were used to enhance phenanthrene solubility and removal efficiency during EK process. Results indicate that the electro-osmotic flow (EOF) rate in the rhamnolipid system is higher than that in Triton X-100. Using the EK technology for the removal of phenanthrene in the presence of rhamnolipid was more efficient than in the presence of Triton X-100. In addition to the transport mechanism of phenanthrene in EK system, the presence of rhamnolipid may promote microbial growth in the soil–water system and bring about biodegradation of phenanthrene. A diffusion–advection–sorption (DAS) model was solved by MATLAB, based on the linear sorption isotherm at the non-equilibrium condition, which is feasible to simulate the movement of phenanthrene during the EK + Triton X-100 treatment.     

Modified Boussinesq''s equations for nonuniform tire loading

Hypotheses from elasticity theory were used for modeling stress distribution in a semi-infinite-homogeneous medium when a point load was applied on its surface. A Concentration factor coefficient was introduced to adapt the equations to the characteristics of the investigated soil. An expression for continuous load distributions and variations in the geometry of the contact area between soil and tire were obtained by means of the superposition principle. Some simulations for different areas and load distributions are discussed and compared with field measurements.     

Ultrasound-assisted soil washing processes for the remediation of heavy metals contaminated soils: The mechanism of the ultrasonic desorption

Ultrasound-assisted soil washing processes were investigated for the removal of heavy metals (Cu, Pb, and Zn) in real contaminated soils using HCl and EDTA. The ultrasound-assisted soil washing (US/Mixing) process was compared with the conventional soil washing (Mixing) process based on the mechanical mixing. High removal efficiency (44.8% for HCl and 43.2% for EDTA) for the metals was obtained for the most extreme conditions (HCl 1.0 M or EDTA 0.1 M and L:S = 10:1) in the Mixing process. With the aide of ultrasound, higher removal efficiency (57.9% for HCl and 50.0% for EDTA) was obtained in the same extreme conditions and similar or higher removal efficiency (e.g., 54.7% for HCl 0.5 M and L:S = 10:1 and 50.5% for EDTA 0.05 M and L:S = 5:1) was achieved even in less extreme conditions (lower HCl or EDTA concentration and L:S ratio). Therefore, it was revealed that the US/Mixing was advantageous over the conventional Mixing processes in terms of metal removal efficiency, consumption of chemicals, amount of generated washing leachate, and volume/size of washing reactor. In addition, the heavy metals removal was enhanced for the smaller soil particles in the US/Mixing process. It was due to more violent movement of smaller particles in slurry phase and more violent sonophysical effects. In order to understand the mechanism of ultrasonic desorption, the desorption test was conducted using the paint-coated beads with three sizes (1, 2, and 4 mm) for the free and attached conditions. It was found that no significant desorption/removal of paint from the beads was observed without the movement of beads in the water including floatation, collision, and scrubbing. Thus, it was suggested that the simultaneous application of the ultrasound and mechanical mixing could enhance the physical movement of the particles significantly and the very high removal/desorption could be attained.     

反相高效液相色谱法测定土壤中氰溴甲苯

提出了反相高效液相色谱法同时测定土壤中氰溴甲苯的方法。样品采用索氏提取法,以二氯甲烷为提取溶剂提取6 h。提取液以ODS-C18色谱柱(150 mm×6 mm,5μm)为分离柱,以甲醇-水(70+30)为流动相经色谱分离,在检测波长为237 nm处进行测定。氰溴甲苯的质量浓度在0.6~10.0 mg.L-1范围内与其峰面积呈线性关系。标准加入回收率在85.0%~95.7%之间,相对标准偏差(n=6)在1.9%~10.3%之间。     

Two rapid and sensitive automated methods for the determination of nitrite and nitrate in soil samples

Spectrophotometric flow injection methods were developed for the individual determination of nitrite or nitrate, and for the simultaneous determination of nitrite and nitrate, in soil samples. Nitrite was determined directly using a modified version of the Griess-Ilosvay diazo-coupling reaction, measuring at 543 nm the absorbance of the azo-dye complex formed. Simultaneous nitrite and nitrate determinations were based on on-line nitrate reduction in a micro column containing copperised cadmium. A single chromogenic reagent containing all the necessary reactants was used in both methods. For determinations, the chemical and instrumental variables were optimised by univariate analysis and simplex chemometric method. The optimised conditions gave a linear calibration range between 0.05 and 1.6 µg m L^− 1 for N-NO₂⁻ and between 0.05 and 7.0 µg m L^− 1 for N-NO₃⁻. The detection limits for nitrite and nitrate were 22 µg L^− 1 and 44 µg L^− 1 respectively. The proposed methods allowed up to 35-40 samples per hour to be analysed with good precision. The simultaneous method was successfully used for the determination of nitrite and nitrate in soil samples (the results obtained were validated against those obtained by reference methods). The proposed methods are simpler and faster than conventional methods and could be routinely used in environmental monitoring laboratories.     

Application of a quick,easy, cheap,effective, rugged and safe-based method for the simultaneous extraction of chlorophenols,alkylphenols, nitrophenols and cresols in agricultural soils,analyzed by using gas chromatography–triple quadrupole-mass spectrometry/mass spectrometry

Due to the different physico-chemical properties of phenols, the development of a methodology for the simultaneous extraction and determination of phenolic compounds belonging to several families, such as chlorophenols (CPs), alkylphenols (APs), nitrophenols (NTPs) and cresols is difficult. This study shows the development and validation of a method for the analysis of 13 phenolic compounds (including CPs, APs, NTPs and cresols) in agricultural soils. For this purpose, a quick, easy, cheap, effective, rugged and safe (QuEChERS)-based procedure was developed, validated and applied to the analysis of real samples. A derivatization step prior to the final determination by gas chromatography (GC) coupled to a triple quadrupole analyzer operating in tandem mass spectrometry (QqQ-MS/MS) was performed by using acetic acid anhydride (AAA) and pyridine (Py). The optimized procedure was validated, obtaining average extraction recoveries in the range 69–103% (10 μg kg⁻¹), 65–98% (50 μg kg⁻¹), 76–112% (100 μg kg⁻¹) and 76–112% (300 μg kg⁻¹), with precision values (expressed as relative standard deviation, RSD) ≤ 22% (except for 4-chlorophenol) involving intra-day and inter-day studies. Furthermore, 15 real soil samples were analyzed by the proposed method in order to assess its applicability. Some phenolic compounds (e.g. 2,4,6-trichlorophenol or 4-tert-octylphenol) were found in the samples at trace levels (<10 μg kg⁻¹).     

Development of a simple extraction and clean-up procedure for determination of organochlorine pesticides in soil using gas chromatography–tandem mass spectrometry

A procedure based on QuEChERS extraction and a simultaneous liquid–liquid partition clean-up was developed. The procedure involved extraction of hydrated soil samples using acetonitrile and clean-up by liquid–liquid partition into n-hexane. The hexane extracts produced were clean and suitable for determination using gas chromatography–tandem mass spectrometry (GC–MS/MS). The method was validated by analysis of soil samples, spiked at five levels between 1 and 200 μg kg⁻¹. The recovery values were generally between 70 and 100% and the relative standard deviation values (%RSDs) were at or below 20%. The procedure was validated for determination of 19 organochlorine (OC) pesticides. These were hexachlorobenzene (HCB), α-HCH, β-HCH, γ-HCH, heptachlor, heptachlor epoxide (trans), aldrin, dieldrin, chlordane (trans), chlordane (cis), oxychlordane, α-endosulfan, β-endosulfan, endosulfan sulfate, endrin, p,p′-DDT, o,p′-DDT, p,p′-DDD and p,p′-DDE. The method achieved low limits of detection (LOD; typically 0.3 μg kg⁻¹) and low limits of quantification (LOQ; typically 1.0 μg kg⁻¹). The method performance was also assessed using five fortified soil samples with different physico-chemical properties and the method performance was consistent for the different types of soil samples. The proposed method was compared with an established procedure based on Soxtec extraction. This comparison was carried out using six soil samples collected from regions of Pakistan with a history of intensive pesticide use. The results of this comparison showed that the two procedures produced results with good agreement. The proposed method produced cleaner extracts and therefore led to lower limits of quantification. The proposed method was less time consuming and safer to use. The six samples tested during this comparison showed that soils from cotton growing regions contained a number of persistent OC residues at relatively low levels (<10 μg kg⁻¹). These residues were α-HCH, γ-HCH, heptachlor, chlordane (trans), p,p′-DDT, o,p′-DDT, p,p′-DDD, p,p′-DDE, β-endosulfan and endosulfan sulfate.     

焦化区土壤苯并（a）芘的污染状况

采用同步荧光光谱法对焦化厂附近不同距离采集的土壤样品中苯并（a）芘含量进行了检测。结果表明,苯并（a）芘的含量在距离焦化厂200m左右处出现最大值,检测结果与当地风向具有相关性。采用大气污染扩散模型对焦化厂焦炉无组织烟气中苯并（a）芘扩散浓度和距离进行了计算,结果与土壤中苯并（a）芘的检出规律具有一致性。     

电感耦合等离子体-质谱测定石灰性土壤中的有效磷

采用电感耦合等离子体一质谱法测定石灰性土壤中的有效磷,方法检出限为0.090μg/g.通过对国家土壤有效态一级标准物质和行业标准物质测试,测定结果与标准值基本一致;对GBW 7413、GBw 7414、ASA-8、ASA-9标准物质进行11次测定的相对标准偏差(RSD)均小于5%.