Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

Compressive advection and multi‐component methods for interface‐capturing

This paper develops methods for interface‐capturing in multiphase flows. The main novelties of these methods are as follows: (a) multi‐component modelling that embeds interface structures into the continuity equation; (b) a new family of triangle/tetrahedron finite elements, in particular, the P₁DG‐P₂(linear discontinuous between elements velocity and quadratic continuous pressure); (c) an interface‐capturing scheme based on compressive control volume advection methods and high‐order finite element interpolation methods; (d) a time stepping method that allows use of relatively large time step sizes; and (e) application of anisotropic mesh adaptivity to focus the numerical resolution around the interfaces and other areas of important dynamics. This modelling approach is applied to a series of pure advection problems with interfaces as well as to the simulation of the standard computational fluid dynamics benchmark test cases of a collapsing water column under gravitational forces (in two and three dimensions) and sloshing water in a tank. Two more test cases are undertaken in order to demonstrate the many‐material and compressibility modelling capabilities of the approach. Numerical simulations are performed on coarse unstructured meshes to demonstrate the potential of the methods described here to capture complex dynamics in multiphase flows. Copyright © 2015 John Wiley & Sons, Ltd.     

A class of finite difference schemes for interface problems with an HOC approach

In this paper, we propose a new methodology for numerically solving elliptic and parabolic equations with discontinuous coefficients and singular source terms. This new scheme is obtained by clubbing a recently developed higher‐order compact methodology with special interface treatment for the points just next to the points of discontinuity. The overall order of accuracy of the scheme is at least second. We first formulate the scheme for one‐dimensional (1D) problems, and then extend it directly to two‐dimensional (2D) problems in polar coordinates. In the process, we also perform convergence and related analysis for both the cases. Finally, we show a new direction of implementing the methodology to 2D problems in cartesian coordinates. We then conduct numerous numerical studies on a number of problems, both for 1D and 2D cases, including the flow past circular cylinder governed by the incompressible Navier–Stokes equations. We compare our results with existing numerical and experimental results. In all the cases, our formulation is found to produce better results on coarser grids. For the circular cylinder problem, the scheme used is seen to capture all the flow characteristics including the famous von Kármán vortex street. Copyright © 2016 John Wiley & Sons, Ltd.     

Rheological Technique as a Sensitive Method to Characterize the Chain Diffusion across the Interface between Polystyrene and Carbon Black Filled Polystyrene

The mutual diffusion process and interphase development taking place at the interface between disks of polystyrene (PS) and carbon black filled polystyrene (CB-PS) in the molten state were investigated by a small-amplitude, oscillatory shear, rheological technique. The rheological method was employed to probe the thermorheological complexity of these polymer disks. It was found that the dynamic complex shear modulus, G*(t), increased with the time of contact in two time regimes at a fixed frequency. The time of transition between the two regimes was observed to be close to the time needed for the transition from the Rouse mode to the reptation mode. The results showed that the content of the carbon black and the temperature affected the slope of the G*(t) – t curve. Scanning electron microscopy revealed the interface disappeared when the diffusion process was complete.     

A mass‐fraction‐based interface‐capturing method for multi‐component flow

An interface‐capturing method based on mass fraction is developed to solve the Riemann problem in multi‐component compressible flow. Equations of mass fraction with modified form, which is derived from conservative equations of mass, are employed here to capture the interface. By introducing mass fraction into Euler equations system, as well as other conservative coefficients, a quasi‐conservative numerical model is created. Numerical examples show that the mass fraction model performs well not only in multi‐component fluids modeled by simple stiffened gas equation of state (EOS) but also in that modeled by complex Mie–Grüneisen EOS. Moreover, the mass fraction model is applied to Riemann problem with piecewise EOS; the expression of which depends on density. It is found that the mass fraction model can well adapt to the analytic change in piecewise EOS and produce accuracy solutions with fewer unknown quantities, and the model can be easily extended to m‐component fluid mixture by using only m + 4 equations with no additional conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Adhesive fracture of heterogeneous interfaces

We have studied the effect of interface heterogeneity on fracture, at both local and global scales. The single cantilever beam adhesion test was used to investigate interfacial fracture between polycarbonate plates and an elastic/fragile epoxy adhesive. Two surface treatments were applied to a (given) polycarbonate plate giving zones of strong and weak adhesion parallel to the crack direction. Calculated fracture energies differed from those expected from a simple rule-of-mixtures. A perturbation method, proposed by Rice, was used and results compared with crack fronts observed in situ. The technique was applied successfully but the difference in values of stress intensity factor between the zones was found substantially different from the experimental value. In an attempt to explain discrepancies, specimens with discontinuous crack fronts (adhesive and/or plates severed along the strong/weak adhesion frontier) were tested. Good agreement was found with the rule-of-mixtures predictions raising questions about the role of crack front continuity in load transfer.     

Hydrogen Spillover Enhanced Hydroxyl Formation and Catalytic Activity Toward CO Oxidation at the Metal/Oxide Interface

H₂‐promoted catalytic activity of oxide‐supported metal catalysts in low‐temperature CO oxidation is of great interest but its origin remains unknown. Employing an FeO(111)/Pt(111) inverse model catalyst, we herewith report direct experimental evidence for the spillover of H(a) adatoms on the Pt surface formed by H₂ dissociation to the Pt?FeO interface to form hydroxyl groups that facilely oxidize CO(a) on the neighboring Pt surface to produce CO₂. Hydroxyl groups and coadsorbed water play a crucial role in the occurrence of hydrogen spillover. These results unambiguously identify the occurrence of hydrogen spillover from the metal surface to the noble metal/metal oxide interface and the resultant enhanced catalytic activity of the metal/oxide interface in low‐temperature CO oxidation, which provides a molecular‐level understanding of both H₂‐promoted catalytic activity of metal/oxide ensembles in low‐temperature CO oxidation and hydrogen spillover.     

Heterointerface Engineering of ZnO/CdS Heterostructures through ZnS Layers for Photocatalytic Water Splitting

Solar-driven water splitting to produce clean and renewable hydrogen offers a green strategy to address the energy crisis and environmental pollution. Heterostructure catalysts are receiving increasing attention for photocatalytic hydrogen generation. ZnO/ZnS/CdS and ZnO/CdS heterostructures have been successfully designed and prepared according to two different strategies. By introducing a heterointerface layer of ZnS between ZnO and CdS, a Z scheme charge-transfer channel was promoted and achieved superior photocatalytic performance. A highest hydrogen generation rate of 156.7 μmol g⁻¹ h⁻¹ was achieved by precise control of the thickness of the heterointerface layer and of the CdS shell. These findings demonstrated that heterostructures are promising catalysts for solar-driven water splitting, and that heterointerface engineering is an effective way to improve the photocatalytic properties of heterostructures.     

Dynamics of excitons and carriers at the NPB/C60 interface by transient photocurrents

The transient photocurrent (TPC) technique was performed to explore the dynamics of excitons and carriers at organic active layer/buffer layer interfaces. A special device with ITO/PEIE/NPB/C₆₀/Al structure was designed to study the interfacial processes at the NPB/C₆₀ interface. An external electrical field was provided to neutralize the built-in electrical field of the device. Interestingly, a new phenomenon was observed, wherein the polarity of the TPC changed from negative to positive under an external electrical field. The initial negative signal was ascribed to exciton separation by the built-in field in C₆₀, and the subsequent positive signal can be attributed to the diffusion of electrons that accumulate at the NPB/C₆₀ interface. TPC measurements shown that further increasing the external electrical field causes polarity to change twice. Analyzing the two changes in polarity revealed that the NPB did not only extract holes from C₆₀ but also provided an effective interface for exciton dissociation.