Study of geometrical parameters in N-H...N type of hydrogen bonds

Geometrical parameters associated with N-H ... N types of hydrogen bonds have been analysed using crystal structure data on nucleic acids, amino acids and related compounds. Histograms depicting the frequency distribution of N-H ... N length (l) and H-N ... N angle (θ) have been drawn and conclusions on the favoured geometry of such bonds have been arrived at. The distribution ofl shows a pronounced maximum in the range between 2.9? and 3.0? with an overall average of 2.98 ?. The θ distribution shows a pronounced maximum for the hydrogen bond angle in the range 0°-10°, with a rapid fall-off in frequency for nonlinear hydrogen bonds. The frequency shows a cos⁶θ dependence as compared to cos²θ dependence term used earlier to predict the angular dependence of hydrogen bond potential energy in proteins and polypeptides.     

溶致液晶中金属纳米粒子的掺杂及其作用机制研究

在用琥珀酸二异辛酯磺酸钠(AOT)构建的具有长程有序结构的层状溶致液晶内, 用不同方式导入预制的亲油或亲水贵金属纳米粒子, 可得到纳米粒子分布在不同介观空间内的无机/有机杂合体. 依据小角X射线散射和偏光显微镜结果, 通过分析掺杂纳米粒子与液晶模板的相互作用, 对掺杂前后体系结构的变化及制得杂合体的稳定性进行了表征. 结果表明, 除考虑掺杂粒子与层状模板空间的匹配外, 体系中静电斥力、范德华引力和Helfrich涨落力之间的平衡是维持液晶结构稳定的基本条件.     

直链醇链长对层状液晶结构与稳定性的影响

作为助表面活性剂,直链醇在层状溶致液晶的制备中是非常重要的。本文以层状液晶的相行为和小角度X射线衍射测量,研究了直链醇链长对层状液晶结构与稳定的影响。     

On the structure formation of hydrophobed particles in the boundary layer of water and octane phases

Two-dimensional aggregation of the surface modified glass beads was carried out in the boundary layer of water and octane phases. The effect of particles' hydrophobicity was investigated on the structure of forming aggregates and the growth process. The structure of the aggregates and their growth were characterized by a density function which demonstrates the change of mean particle density as a function of aggregate size. The growth yielded fractal or nonfractal structures in the investigated systems. The fractal structure of the aggregates was observed to be dependent on restructuring processes controlled by the surface properties of the beads.The experimental results are compared with earlier findings for aggregation of hydrophobic beads in the boundary layer of water and air phases.On leave from Loránd Eötvös University, Budapest, Hungary     

Synthesis of novel soluble poly(imide-siloxane)s via hydrosilylation: Characterization and structure property behaviour

A series of novel poly(imide-siloxane)s (PIS) were synthesized by the grafting of amine terminated soluble imides to the siloxane backbone. The amine terminated imides were synthesized by choosing suitable anhydrides and amines to get the imides that are soluble in polar and non-polar solvents. The imides were grafted to the siloxane backbone by the epoxy group cleavage. All the polymers were obtained in quantitative yields with the inherent viscosities ranging from 0.22 to 1.2 dL g⁻¹. The polymers were characterized by FT-IR, ¹H and ¹³C NMR, and were examined for their thermal properties. The polymers were found to be stable up to a temperature 350 °C. The DSC results showed a single glass transition in the negative temperature, whereas the DTA revealed another glass transition in the positive end for some of the polymers showing phase separation. Polymer films were prepared employing the coupling reaction between PIS and the polydimethylsiloxane matrix by varying the amount of incorporation of PIS in the films. The polymer films had a tensile strength of 35-82 MPa with a percentage elongation of 86-271%. The contribution of polar and dispersion component towards the total surface energy was studied by the contact angle measurement and a reduction in surface tension of 14 mN m⁻¹ was achieved with the fluorine containing PIS membrane.     

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.     

紫外光引发LDPE膜接枝含氟丙烯酸酯的研究

通过紫外光引发表面接枝聚合反应的方法 ,把含氟丙烯酸酯单体R 5 6 1 0引到LDPE薄膜上 .对经丁酮抽提后的接枝膜进行FTIR、ESCA、SEM和DSC等表征 ,证实含氟聚合物以化学键的方式接枝在LDPE基体膜上 .在一定范围内 ,增加紫外光强、引发剂和单体浓度以及反应温度等均有利于提高接枝率 .经计算R 5 6 1 0的紫外光引发接枝聚合反应总活化能为 5 4 2kJ mol.接枝膜的接触角随着接枝率的提高逐步增大 ,直至趋于恒定 .作者提出接枝膜存在一个在接触角测定时影响基体膜与探测水滴相互作用过程的边界层 .当接枝率较低、接枝层厚度小于边界层临界厚度时 ,基体LDPE影响接触角的大小 ,但随着接枝率提高 ,接枝层逐渐变厚 ,氟聚合物层对接触角的贡献逐渐占优势 ,导致接触角随之增大 .当接枝率超过一定值以后 ,接枝层厚度超过边界层临界厚度 ,接枝层对接枝膜的接触角起全部贡献 ,接触角测定值随之稳定     

Surface and bulk properties of severely fluorinated carbon fibres

The development of ultra-inert composites using fluorinated carbon fibres as the reinforcement requires fluorinated carbon fibres with a durable surface composition. Here we report the effect of direct fluorination using an F₂/N₂ mixture at 653 K on the surface and bulk properties of two types of high strength carbon fibres. These were treated up to a surface fluorine content of ∼64 at.% and a bulk fluorine content of ∼15 mass%. A colour change was observed after fluorination caused by the changes in the graphitic band structure of the carbon fibres by the introduction of carbon sp³ hybridisation. The tensile strength and Young's modulus decrease after fluorination by up to 33 and 22%, respectively. XRD shows marginal changes in the interlayer distance but the crystallite size increases. Changes in the electrical conductivity of the fluorinated carbon fibres indicate that the modification is confined to the near surface volume. Predominantly covalent C-F bonds are formed as shown by X-ray photoelectron spectroscopy (XPS) and measured zeta (ζ)-potentials. Hence the fluorinated fibres are hydrophobic and have low surface tensions. This and the large increase in fibre surface area, as determined by nitrogen adsorption, is expected to facilitate interfacial interaction between fluorinated carbon fibres and fluoropolymers.     

Combined IR and XPS analysis of the native (1 0 0) surface of single‐crystalline silicon after HFaq etching

A combined analysis, based on angle‐resolved X‐ray photoelectron spectroscopy and multiple‐internal‐reflection infrared spectroscopy, of the (1 0 0) silicon surface after etching in dilute aqueous solution of HF is presented. The analysis shows that the surface is mainly formed by a heterogeneous distribution of SiH, SiH₂ and SiH₃ terminations, but contains (in addition to sub‐stoichiometric oxidized silicon) a form of reduced silicon, not consistent with the currently accepted picture of the native HF_aq‐etched surface. Copyright © 2007 John Wiley & Sons, Ltd.     

New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002