不同半光强角对医用LED阵列灯珠间距影响的仿真研究

 讨论LED光源的半光强角对LED之间的最大间距的影响,采用Matlab软件对LED单元照度数据进行计算及仿真,给出相应的仿真图形。仿真结果表明:LED光源之间的最大间距与其功率无关,由于仿真的结果与理论计算值相吻合,说明在计算中所建立的LED的光学模型具有较高的可信度,所得结果为LED多阵列（如圆形,矩形,椭圆等）的仿真及应用设计奠定了理论基础。     

Modification of surface properties of electrospun polyamide nanofibers by means of a perfluorinated acridine

Polyamide 6 (PA6) nanofibers were prepared from formic acid solutions by using electrospinning technique. The fibers were smooth, defects free and with diameters smaller than 200 nm. Small amounts of a perfluorinated acridine were added as dopant to the feed solution to modify the wettability of the fibers. The effect of doping on the contact angle values is well apparent. The contact angle values go from 50° of pure PA6 to 120° when 6% of acridine is added. A comparison between fibers and films of pure and doped polyamide 6 was carried out in order to determine the effect of morphology on wettability. Thermal annealing near the T_g of the polymer promoted the segregation of the molecules to the surface, reaching contact angles of 131° with smaller amounts (4%) of acridine. The surface segregation was also promoted by time aging.     

Calculations of molecular multipole electric moments of a series of exo-insaturated four-membered heterocycles,Y = CCH2CH2X

The influence of ring puckering angle on the multipole moments of sixteen four-membered heterocycles (1-16) was theoretically estimated using MP2 and different DFTs in combination with the 6-31+G(d,p) basis set. To obtain an accurate evaluation, CCSD/cc-pVDZ level and, the MP2 and PBE1PBE methods in combination with the aug-cc-pVDZ and aug-cc-pVTZ basis sets were performed on the planar geometries of 1-16. In general, the DFT and MP2 approaches provided an identical dependence of the electrical properties with the puckering angle for 1-16. Quantitatively, the quality of the level of theory and basis sets affects significant the predictions of the multipole moments, in particular for the heterocycles containing C=O and C=S bonds. Convergence basis sets within the MP2 and PBE1PBE approximations are reached in the dipole moment calculations when the aug-cc-pVTZ basis set is used, while the quadrupole and octupole moment computations require a larger basis set than aug-cc-pVTZ. On the other hand, the multipole moments showed a strong dependence with the molecular geometry and the nature of the carbon-heteroatom bonds. Specifically, the C-X bond determines the behavior of the μ(?), θ(?) and ?(?) functions, while the C=Y bond plays an important role in the magnitude of the studied properties.     

Fabrication of durable hydrophobic surfaces through surface texturing

Low surface energy polymer thin-films can be applied to surfaces to increase hydrophobicity and reduce friction for a variety of applications. However, wear of these thin films, resulting from repetitive rubbing against another surface, is of great concern. In this study, we show that highly hydrophobic surfaces with persistent abrasion resistance can be fabricated by depositing fluorinated carbon thin films on sandblasted glass surfaces. In our study, fluorinated carbon thin films were deposited on sandblasted and as-received smooth glass using deep reactive ion etching equipment by only activating the passivation step. The surfaces of the samples were then rubbed with FibrMet abrasive papers in a reciprocating motion using an automatic friction abrasion analyzer. During the rubbing, the static and kinetic friction forces were also measured. The surface wetting properties were then characterized using a video-based contact angle measuring system to determine the changes in water contact angle as a result of rubbing. Assessment of the wear properties of the thin films was based on the changes in the water contact angles of the coated surfaces after repetitive rubbing. It was found that, for sandblasted glass coated with fluorinated carbon film, the water contact angle remained constant throughout the entire rubbing process, contrary to the smooth glass coated with fluorinated carbon film which showed a drastic decrease in water contact angle with the increasing number of rubbing cycles. In addition, the static and kinetic friction coefficients of the sandblasted glass were also much lower than those of the smooth glass.     

Mechanically stable and corrosion resistant superhydrophobic sol-gel coatings on copper substrate

Development of the anticorrosion coatings on metals having both passive matrix functionality and active response to changes in the aggressive environment has raised tremendous interest in material science. Using a sol-gel deposition method, superhydrophobic copper substrate could be obtained. The best hydrophobic coating sol was prepared with methyltriethoxysilane (MTES), methanol (MeOH), and water (as 7 M NH₄OH) at a molar ratio of 1:19.1:4.31 respectively. The surface morphological study showed the ball like silica particles distributed on the copper substrate with particle sizes ranging from 8 to 12 μm. The coatings showed the static water contact angle as high as 155° and the water sliding angle as low as 7°. The superhydrophobic nature was maintained even though the deposited copper substrate was soaked for 100 h in 50% of HCl solution. The coatings are stable against humidity and showed superhydrophobic behavior even after 90 days of exposure. The coatings are mechanically stable and water drops maintained the spherical shape on the bent copper substrate, which was bent more than 90°.     

溅射气压对X射线多层膜反射率的影响

本文在不同的溅射气压的情况下制备了具有相同结构参量的Mo/Si多层膜,测出了其对应的小角度X衍射曲线,在北京同步辐射实验室测量了多层膜的软X射线反射率.小角X射线衍射谱表明:随着溅射气压升高,多层膜的小角X射线衍射曲线的高次峰的峰高急剧变小,半峰宽变大.反射率测量结果也表明:多层膜的X射线反射率随溅射气压的升高而急剧降低.     

用任意偏向角测量三棱镜折射率

本文给出用任意偏向角测量三棱镜折射率的理论公式和实验方法，并给出与最小偏向角法测量结果的比较，具有几乎一样的误差。     

Curvature walls and focal conic domains in a lyotropic lamellar phase

In the quasi-ternary CPCl/brine/hexanol lyotropic system, the interface of the lamellar and L₃ sponge phases displays a phenomenon of epitaxy: the layers of the lamellar phase tend to make a constant non-trivial angle with the interface. Thin samples of lamellar phase embedded in the sponge phase are thus submitted to oblique anchoring conditions and defects are created in the lamellar phase in order to satisfy the bulk lamellar ordering and the boundary conditions. We have studied small droplets of lamellar phase in the sponge phase. They do not exhibit the classic defects (focal conic domains) but wall defects, which appear in order to satisfy the smectic elasticity and the boundary conditions. Moreover we show through experiments in controlled geometry that, even in the presence of focal conic domains, wall defects control the size and periodicity of the textures which are observed at the interface. Received 4 November 1998     

两位置交换问题魔角旋转核磁共振时域信号的准确解

已知两位置交换分子运动速率对于静态¹³CNMR谱的影响是由一简单代数关系决定,它已成为分析固体中分子运动的常规方法.慢速的魔角旋转可以保留边带,所产生的边带型原则上也可用来分析分子运动,只是缺乏象静态谱那样的简单的关系,以至于在实际应用上是不可行的.本文给出作者所发现的存在分子运动时魔角旋转核磁共振自由诱导衰减信号的解析表达式的理论推导,提供分析固体分子运动的理论谱计算公式.我们选择二甲矾(dimethylsulfone)作为模型化合物,记录其不同温度下¹³CNMR谱,又计算了两个甲基做两位置交换运动的理论谱.理论谱与实验谱定性一致.定量上,边带强度存在一些差别,但边带宽度符合很好.通过理论谱与实验谱的比较,得到交换速率与温度的对应关系.虽然本文限于化学位移各向异性相互作用两位置交换问题,但容易推广到偶极作用多位置交换问题.