The investigation of ancient pottery

Summary Ancient ceramic samples (single fragments and different parts of pots, unbroken and repaired; total about 180 samples) dated from the transitional period of late Bronze to early Iron Age (VIII-VI centuries BC) and early Iron Age (VII-IV centuries BC) were investigated by thermal analysis, X-ray powder diffraction, petrography, and scanning electron microscopy equipped with the energy-dispersive X-ray analyzer. In addition to that, to identify the clay sources for the ceramic manufacturing, about 15 samples of clays and soils found near archeological digs and taken from the mineralogical museum were investigated. We found out that the calcite content of ceramics is a very informative parameter for the identification of the clay source for the pottery manufactured at low technological level (low-temperature firing).     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

Thermal behaviour of advanced composite materials based on SiC fibres

Emanation thermal analysis (ETA) was used for characterization of thermal behaviour of SiC_f/SiC composites on heating in argon and air, respectively. Effect of gas environment (argon, air) and helium ions implantation on the microstructure development of the SiC_f/SiC composite prepared by chemical vapour infiltration (CVI) from Nicalon CG fibres was investigated under in situ conditions of heating. The annealing of near surface structure irregularities was observed in the range 280-700°C and evaluated by means of the mathematical model, assuming that the structure irregularities served as diffusion paths for radon. The ETA reflected the formation of amorphous silica and its subsequent crystallization to crystoballite. Morphology of the SiC_f/SiC samples before and after the heat treatments was characterized by means of SEM. This revised version was published online in July 2006 with corrections to the Cover Date.     

AES investigations on starting powders for high performance ceramics

AES depth profiles on ceramic powders (untreated/hydrolyzed/oxidized/ (Al, Y)₂O₃ coated Si₃N₄, [BaO, SiO₂] coated Al₂O₃) are feasible on thin, homogeneous layers or m sized agglomerations prepared on an Au foil. By means of the depth profiles one can qualitatively characterize the coating around the particles. Factor analysis of the depth profiles on the differently treated Si₃N₄ powders suggests the existence of an Si₂N₂O phase on the oxidized sample.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

碳热还原制备不同形貌的碳化硅纳米线

以酚醛树脂为碳源，正硅酸乙酯为硅源，硝酸镧和表面活性剂为调控剂，通过溶胶-凝胶和碳热还原反应制备了不同形貌的碳化硅纳米线。采用X射线衍射、扫描电子显微镜、透射电子显微镜和X射线散射能谱对所制备的碳化硅纳米线进行表征。结果表明，通过此方法所制备的碳化硅纳米线均为立方结构的β-SiC，分别具有直线状、竹节状和链珠状、分枝状等不同形貌。金属催化剂和表面活性剂对碳化硅纳米线的结构和形貌变化有重要影响。     

聚酰亚胺LB膜热解制备SiC薄膜的XPS研究

用XPS对沉积在硅基片上的聚酰亚胺LB膜以及由它真空热解制备的SiC薄膜进行了研究 ,并对其形成过程进行了跟踪分析 .XPS结果显示聚酰亚胺LB膜结构均匀 ,质量良好 ;真空热解时 ,约在 6 70℃时LB膜中的C与衬底Si反应形成SiC ;Ar离子溅射深度俄歇谱表明所制备的SiC膜中Si和C浓度成梯度分布 ,说明SiC是由Si和C相互扩散反应形成的     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Boride-based nano-laminates with MAX-phase-like behaviour

MAX-phases being usually composed of transition metals, group A elements and carbon/nitrogen are considered interesting materials for many applications because of their tremendous bulk modulus, “reversible” plasticity, and machinability. This is mainly due to their unique kind of bonding comprising covalent, ionic as well as metallic bonds providing “easy” planes of rupture and deformability due to the layered crystal structures.In transition metal boride systems, similar types of bonding are available. In particular the W₂B₅-structure type and its stacking variations allow the synthesis of strongly layered crystal structures exhibiting unique delamination phenomena.The paper presents ab initio calculations showing the similarities of bonding between the ternary carbides and the corresponding ternary or quaternary borides. Formation of boride-based nano-laminates from auxiliary liquid phases, from the melt as well as during sintering and precipitation from supersaturated solid solutions will be discussed by means of SEM and TEM studies. The role of impurities weakening the interlayer bonding will be addressed in particular. The pronounced cleavage parallel to the basal plane gives rise for crack deflection and pull-out mechanisms if the laminates are dispersed in brittle matrices such as boron carbide, silicon carbide or other transition metal borides.     

A novel microwave dielectric ceramic Ca2Zn4Ti16O38: Preparation and dielectric properties

A novel microwave dielectric powder with composition of Ca₂Zn₄Ti₁₆O₃₈ was synthesized through a citrate sol-gel process. The development of crystalline phases with heat-treating temperature for the gel derived powders was evaluated by using thermo-gravimetric analysis and X-ray powder diffraction analysis techniques. The pure phase of Ca₂Zn₄Ti₁₆O₃₈ with crichtonite crystal structure was obtained at relatively low temperature of 1000 °C. The synthesized powder has high reactivity and the dense ceramics with single crystalline phase were obtained at low sintering temperature of 1100 °C. Impedance spectroscopy and microwave dielectric measurements on sintered samples showed the present compound to be a modest dielectric insulator with excellent dielectric properties of ε_r∼47-49, Qf value ∼27,800-31,600 GHz and τ_f∼+45 to +50 ppm/°C. It shows comparable microwave dielectric properties to other moderate-permittivity microwave dielectrics, but much lower sintering temperature of 1100 °C.     

Optimization of firing parameters for ceramic wares by thermal analysis

Aesthetic and utilitarian properties of traditional ceramic wares as well as engineering properties of modern advanced ceramics are attained by maintaining an optimum temperature-time-atmosphere relationship, called firing schedule, in the kiln. The contribution of modern thermal analysis (TA) techniques such as TG/DTG, TG/EGA, TG/MS, DTA, DSC, TDA, etc. in 1) optimizing production steps by raw material quality control, by studying binder burn out, product densification, 2) in simulating appropriate preheating, firing and cooling schedules as well as 3) in developing shorter firing cycles has been extensively reported in recent literature. The paper will first discuss theoretical curves and energy required for ceramic firing and present from the literature selected examples of applications of thermal analysis in ceramic technology.