A new high frequency dynamic mechanical analysis system: An approach to direct high frequency testing of tire tread rubber

Dynamic Mechanical Analysis (DMA) systems are measurement devices for obtaining master curves and complex modules of viscoelastic materials, such as rubbers. The conventional DMAs measurement systems in market have several limitations, which restrict their ability for operating at high frequencies. Thus, Williams, Landel and Ferry (WLF) relation is used to produce master curves and predict the material properties at high frequencies. In conventional DMAs, experiments are done in a range of temperatures, and then a master curve is made for a chosen reference temperature by shifting the measurements data to high frequencies. Therefore, the obtained results, which are not based on direct measurements, can be inaccurate. In order to overcome this problem a new simple shear high-frequency DMA (HFDMA) system is designed and built to directly measure the dynamic mechanical properties of viscoelastic material at high frequencies and the strain levels sufficient for tire manufacturers. The new HFDMA can be used to test any viscoelastic materials which have glass transmission temperature (Tg) lower than room temperature (about 23 °C) such as the Styrene-butadiene rubber (SBR). The SBR is the base material for tire tread. The designing process of this new HFDMA is presented in this paper. The rubber specimen shape is chosen by taking into account the shear elastic wave effect, bending, buckling effect and heat generation in the specimen. The repeatability test is accomplished to ensure that the results obtained from the new HFDMA are repeatable and the repeatability uncertainty is about 0.04%. The new HFDMA is validated by comparing to the direct test results of conventional DMA at 100 Hz. The direct high frequency (5 kHz) complex shear modulus and damping factor are compared with the master curve of the conventional DMA developed by the use of WLF relation for SBR. This comparison revealed that the complex shear modulus and damping factor of the SBR obtained from the HFDMA at 5 kHz and 0.05% strain amplitude are about 7% and 6.5% higher than those obtained from the conventional DMA, respectively.     

Analytical theory for ion transfer–electron transfer coupled reactions at redox layer–modified/thick film–modified electrodes

Electrodes modified by liquid films or plasticized polymeric membranes containing a redox species offer valuable alternatives for the study of ion transfers and bimolecular electron transfers at liquid–liquid interfaces with conventional electrode arrangements and stable interfaces. The ion-to-electron (or electron-to-electron) transducer affects the electrochemical signal, complicating the accurate analysis of experimental data. This can be reduced through the use of an electrode surface-attached redox species of well-defined electrochemical behaviour. As will be demonstrated, the voltammetry of these systems show significant deviations with respect to individual charge transfers, which must be considered for appropriate diagnosis and quantitative analysis. For this, a simple analytical theory is presented here, deducing mathematical expressions for the current–potential response, as well as for the potential difference at the two polarized interfaces, the surface excess of the redox species and the ion interfacial concentrations.     

直接出射白光的新型发光二极管

介绍了实现出射白光发光二极管的几种方法,包括波长转化产生白光,多有源区级联合成白光以及单个有源区直接出射白光.并从芯片结构、材料选取、白光形成机理以及器件性能等四个方面对这几种方法进行了分析比较.最后指出了实现直接出射白光的发光二极管存在的问题及今后的研究重点.     

Synthesis and Structural Characterization of a New Cadmium(Ⅱ) Complex Bridged by Endo-norbornene-cis-5,6-dicarboxylic Acid

A polynuclear complex [Cd(endc)(H2O)]n·nH2O (endc = endo-norbomene-cis5,6-dicarboxylate anion) has been synthesized by the hydrothermal reaction of cadmium nitrate tetrahydrate with endo-norbomene-cis-5,6-dicarboxylic acid in 1:1 molar ratio,and structurally characterized by single-crystal X-ray diffraction.It crystallizes in monoclinic,space group P21/c with a = 1.16471(7),b = 0.95334(7),c = 0.91109(9) nm,Z = 4,V= 1.01035(14)nm3,Dc.= 2.160 g/cm3,μ= 2.172 mm-1,F(000) = 648,R =0.0302 and wR = 0.0752.According to structural analysis,each Cd(Ⅱ) ion is coordinated to six O atoms from three endc anions and one water molecule,giving a distorted octahedral geometry.Two- dimensional layer arrangement of the title complex is constructed from the bridging nature of endc.It is worth notice that adjacent two-dimensional layers are joined together to form a three-dimensional supramolecular framework via intermolecular hydrogen bonding interactions.     

Structure of BaGd2（MoO4）4 Crystal

The title compound belongs to monoclinic,space group C2/c with a=5.2694(1),b=12.6659(4),c=19.4108(2) ,β=91.504(2)°,V=1295.06(5) 3,Z=4 and Dc=5.599 g/cm3. The structure of BaGd2(MoO4)4 contains a MoO4 tetrahedron,a distorted GdO8 polyhedron,and Ba2+ ions in a tenfold coordination. The GdO8 polyhedra are linked together through edge-sharing to give a two-dimensional Gd layer. The MoO4 tetrahedra connected to the Gd atoms are capped up and down the Gd layer through common oxygen apices,thus forming a new Gd-Mo layer. Finally,the Gd-Mo layers are held together through bridging BaO10 polyhedra to form a three-dimensional framework. Since the Ba-μ3-O bond has a large average distance of 2.888 ,this structural characteristic will result in a cleavage along the (001) plane.     

A Novel Hybrid Solid Constructed from Tetramolybdate and Copper Complexes with Mixed Ligands: [{(Cu·phen)2(tp)}{(Cu·phen·H2O)2(tp)}{Mo4O14}]

A novel copper molybdate with mixed ligands, [{(Cu·phen)2(tp)}{(Cu·phen·H2O)2(tp)}{Mo4O14}] (phen=1,10-phenanthroline, tp=terephthalate) 1, has been hydrothermally synthesized and structurally characterized. The crystal belongs to monoclinic system, space group P21/c with a=13.1711(7), b=19.6132(10), c=13.6910(7) (A), β=117.6870(10)°, V=3131.8(3)(A)3, Z=2, C64H44Cu4Mo4N8O24, Mr=1946.99, Dc=2.065 g/cm3, F(000)=1920, μ(MoKα) (A) 2.198 mm-1, R=0.0810 and wR=0.2012 for 4233 observed reflections (Ⅰ ＞ 2σ(Ⅰ)). The structural analysis indicates that the title compound contains a discrete tetramolybdate cluster decorated with copper complex fragments and tp ligands bridging the clusters into a wave-like layer. The hydrogen bonding between adjacent layers further extends the compound into a 3-D framework.     

剪切历史对尼龙熔体结晶行为的影响

采用差示扫描量热法研究了原始聚酰胺材料在经历不同的预剪切过程或应用不同设备进行剪切后其结晶行为的变化,结果表明,原始样品经过预剪切后,结晶温度升高5～10℃,半结晶时间降低到原始样品的一半.当聚酰胺材料经历很低的剪切时其结晶温度就有很大的提高,进一步提高剪切强度,结晶温度的增加趋势变缓.偏光显微镜观察表明有剪切历史的样品,球晶尺寸减小.作为对此,聚烯烃和聚酯材料的结晶对剪切历史不敏感,剪切与非剪切样品的结晶行为基本相同,据此推测聚酰胺分子间氢键可能是这种剪切记忆效应产生的原因.     

Predicting ion selectivity in water purification by capacitive deionization: Electric double layer models

Ion-selective water treatment is needed to address emerging problems in an energy- and cost-efficient manner. Capacitive deionization (CDI) is a membraneless water treatment technology, which relies on storing ions in charged electric double layers (EDLs) of micropores. CDI has shown remarkable selectivity, with local density approximations (LDAs) showing some success in guiding selective separations. However, many underlying processes are represented by lumped fitting parameters in LDA models, hindering further progress. Atomistic models help unravel selectivity mechanisms, but are difficult to integrate with cell-level CDI theory. Here, we review and extend LDA models for CDI, highlight a knowledge gap in connecting between LDA and atomistic models for CDI, and emphasize and build upon analogies between micropore EDLs and nanofiltration membranes.     

Multiscale modeling of the effect of carbon nanotube orientation on the shear deformation properties of reinforced polymer-based composites

A combination of molecular dynamics (MD), continuum elasticity and FEM is used to predict the effect of CNT orientation on the shear modulus of SWCNT-polymer nanocomposites. We first develop a transverse-isotropic elastic model of SWCNTs based on the continuum elasticity and MD to compute the transverse-isotropic elastic constants of SWCNTs. These constants are then used in an FEM-based simulation to investigate the effect of SWCNT alignment on the shear modulus of nanocomposites. Furthermore, shear stress distributions along the nanotube axis and over its cross-sectional area are investigated to study the effect of CNT orientation on the shear load transfer.