实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Phase Relations in the Ni–Mn–Ga Ternary System and Aging Effect on Shape Memory Properties of Ferromagnetic Ni<Subscript>2</Subscript>MnGa Sputtered Films

Summary. Isothermal sections of the Ni–Mn–Ga ternary phase diagram at 1073 and 1273 K were investigated over a wide range of alloy compositions. The range of the β-Ni₂MnGa phase, its equilibria with the γ-(Mn, Ni), α′-Ni₃Ga, and γ-Ni₃Ga₂ phases, and the liquidus and solidus lines were determined experimentally. The aging effect on the shape memory effect (SME) of Ni₂MnGa sputtered films was also investigated. The two-way SME of the constraint-aged films was confirmed by the temperature change.     

What crystals of small analogs are trying to tell us about cellulose structure

The molecular geometries from crystal structures of 23 small molecules such as cellobiose were reviewed and extrapolated to give model cellulose chains. Within a given model, all monosaccharide units and their linkages are identical so the models are regular helices. Despite fairly large ranges for the glycosidic linkage torsion angles and , 29° and 57°, respectively, there is little variation in the n and h parameters of the model helices. They are extended, with h values (the advance per residue along the helix axis) of 5.04–5.27 Å. Some models were slightly right-handed, with n values up to 2.12 residues per helix turn. Left-handed models were in the majority, and their n values were as large as –2.91. These results are consistent with known structures of cellulose and its derivatives. An exception comes from a heavily derivatized cellobiose molecule. It yields right-handed helices with n 4.5 and h 3 Å. Because one half turn of this helix reverses the direction of the chain in a compact region, the linkage geometry is a model for chain-folding. Other derivatives that are unable to form the O3O5 hydrogen bond gave left-handed helices. The puckering of the glucose rings was also surveyed. A number of rings in small molecule structures are puckered to a degree that is similar to the puckering determined for methyl cellotrioside, cellotetraose, cellulose I and cellulose II.     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Recovery of pyridine from aqueous solution by membrane pervaporation

Three different membranes, based on poly(dimethylsiloxane) (PDMS), cation-exchange material and poly(vinyl alcohol) (PVA) respectively, were tudied for the separation of pyridine-water mixtures by pervaporation. The PDMS membrane was preferentially permeable to pyridine and the other two were selective towards water. Three membranes showed different permeation performance, allowing the application of the technique to the separation of feeds of different composition. The temperature profile of the permeability suggests that it is possible to carry out the operation at an elevated temperature in order to achieve high productivity. A combination of the three types of membranes was designed for the production of anhydrous pyridine from dilute pyridine aqueous solution by pervaporation.     

<Emphasis Type="Italic">L</Emphasis>-Carnitine Supplementation: A New Paradigm for its Role in Exercise

Summary. Early research investigating the effects of L-carnitine supplementation has examined its role in substrate metabolism and in acute exercise performance. These studies have yielded equivocal findings, partially due to difficulties in increasing muscle carnitine concentrations. However, recent studies have proposed that L-carnitine may play a different role in exercise physiology, and preliminary results have been encouraging. Current investigations have theorized that L-carnitine supplementation facilitates exercise recovery. Proposed mechanism is as follows: 1) increased serum carnitine concentration enhances capillary endothelial function; 2) increased blood flow and reduced hypoxia mitigate the cascade of ensuing, destructive chemical events following exercise; 3) thus allowing reduced structural damage of skeletal muscle mediated by more intact receptors in muscle needed for improved protein signaling. This paradigm explains decreased markers of purine catabolism, free radical formation, and muscle tissue disruption after resistance exercise and the increased repair of muscle proteins following long-term L-carnitine supplementation.     

Integrated production of ethanol fuel and protein from Coastal Bermudagrass

The herbaceous crops that may provide fermentable carbohydrates for production of fuels and chemicals also contain 10–20% protein. Protein coproduction with biomass-derived fuels and chemicals has important advantages: (1) food and fuel production can be integrated, and (2) protein is a high-value product that may significantly improve overall process economics. We report the results of an integrated approach to producing protein and fermentable sugars from one herbaceous species, Coastal Bermudagrass (CBG). The ammonia fiber explosion (AFEX) process makes possible over 90% conversion of cellulose and hemicellulose to simple sugars (about 650 mg reducing sugars/g dry CBG) at 5 IU cellulase/g vs < 20% conversion for untreated CBG. The AFEX treatment also improves protein extraction from CBG; over 80% protein recovery is possible from AFEX-treated CBG vs about 30% recovery from untreated CBG.     

Selectivity of long chain stationary phases in reversed phase liquid chromatography

A series of commercial monomeric and polymeric C(18), C(27), and C(30) stationary phases were compared with immobilized poly(ethylene-co-acrylic acid) stationary phases synthesized in-house. The columns were characterized on the basis of methylene selectivity, silanol activity, metal activity, pore size, shape selectivity, and the ability to separate tocopherol isomers and carotenoid isomers. Monomeric and polymeric C(30) phases were shown to yield excellent separations of the tocopherol isomers while the polymeric C(30) and polyethylene phases were more appropriate to the separation of carotenoids.     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.