Effect of static bed height in the upper fluidized bed on flow behavior in the lower riser section of a coupled reactor

To study olefin reduction by using an auxiliary reactor for FCC naphtha upgrading, a large-scale cold model of a riser-bed coupled to an upper fluidized bed was established. The effect of static bed height in the upper fluidized bed on particle flow behavior in the lower riser was investigated experimentally. A restriction index of solids holdup was used to evaluate quantitatively the restrictive effect of the upper fluidized bed. Experimental results show that, under the restrictive effect of the upper fluidized bed, the riser could be divided into three regions in the longitudinal direction: accelerating, fully developed and restriction. The axial distribution of solids holdup in the riser is characterized by large solids holdup in the top and bottom sections and small solids holdup in the middle section. Overall solids holdup increased with increasing static bed height in the upper fluidized bed, while particle velocity decreased. Such restrictive effect of the upper fluidized bed could extend from the middle and top sections to the whole riser volume when riser outlet resistance is increased, which increases with increasing static bed height in the upper fluidized bed. The upper bed exerts the strongest restriction on the area close to the riser outlet.     

PEPT study of particle motion for different riser exit geometries

Laboratory and industrial risers are equipped with exits of many different layouts, and numerous publications discuss the influence of riser exit geometry on local and overall solids hydrodynamics in the riser. The present paper reviews literature findings--mostly based upon indirect experimental techniques and often somewhat contradictory, Direct measurement of particle velocity and particle occupancy near and in the riser exit provide a better indication of the effect of riser exit geometry. Positron Emission Particle Tracking （PEPT） was used in this work for the first time to investigate the exit region of the riser, An abrupt or sharp exit causes particles to be knocked out of the gas flow, so forming a recirculation or reflux region in the upper part of the riser. This is much less pronounced with a curved or gradual exit.     

Peeling Layers of an Onion: Inventory Model with Multiple Delivery Modes and Forecast Updates

This paper is concerned with a periodic review inventory system with fast and slow delivery modes and regular demand forecast updates. At the beginning of each period, on-hand inventory and demand information are updated. At the same time, decisions on how much to order using fast and slow delivery modes are made. Fast and slow orders are delivered at the end of the current and the next periods, respectively. It is shown that there exists an optimal Markov policy and that it is a modified base-stock policy.     

A Simple and Effective Component Procurement Policy for Stochastic Assembly Systems

We examine the component procurement problem in a single-item, make-to-stock assembly system. The suppliers are uncapacitated and have independent but non-identically distributed stochastic delivery lead times. Assembly is instantaneous, product demand follows a Poisson process and unsatisfied demand is backordered. The objective is to minimize the sum of steady-state holding and backorder costs over a pre-specified class of replenishment policies. To keep the analysis tractable, we impose a synchronization assumption that no mixing occurs between sets of component orders. Combining existing results from queueing theory with original results concerning distributions that are closed under maximization and translation, we derive a simple approximate solution to the problem when lead time variances are identical. In simulations, our derived policy is within 2% of optimal and significantly outperforms policies that ignore either component dependence or lead time stochasticity. It is also quite robust with respect to various model assumptions, except the synchronization one.     

基于电子商务的集群式供应链跨链库存控制

以电子商务环境下集群式供应链库存控制为对象,建立了时变需求下跨链合作的交叉库存模型,并用H∞控制中抑制外部干扰的对策理论来寻求最优订货策略,以减小库存、订货波动和提高供需网快速响应市场的能力.文中采用对比分析方法分别针对供应链间有合作与无合作情形对模型做了仿真实验,仿真表明,实施H∞控制和交叉紧急库存补充策略可以有效避免货物积压或缺货现象,提高供应链及集群的竞争力.     

安全因子优化与协调模型研究

在需求和供应都不确定的情形下 ,通过模型研究对两阶供应链的安全因子优化与协调作了一些有益的探讨 .本文引入了有效库存水平的概念 ,以反映上游缺货对下游库存的影响 ,在基准库存水平补货模式下构造了的供需双方的库存模型 ,且对安全因子进行整体优化以降低供应链的库存成本 .     

Optimization of the decentralized cash management problem

This paper treats the problem of determining optimal level of transaction balances in a decentralized firm. In conformity with the practices of such firms, cash generated at dispersed location is concentrated at central locations prior to short-term investment and borrowing. Under deterministic assumptions, an optimal transfer/investment is derived and a simple procedure for determining optimal parameters is described.     

Optimal Solutions in the Multi-location Inventory System with Transshipments

We consider a single-period multi-location inventory system where inventory choices at each location are centrally coordinated. Transshipments are allowed as recourse actions in order to reduce the cost of shortage or surplus inventory after demands are realized. This problem has not been solved to optimality before for more than two locations with general cost parameters. In this paper we present a simple and intuitive model that enables us to characterize optimal inventory and transshipment policies for three and four locations as well. The insight gained from these analytical results leads us to examine the optimality conditions of a greedy transshipment policy. We show that this policy will be optimal for two and three locations. For the n location model we characterize the necessary and sufficient conditions on the cost structure for which the greedy transshipment policy will be optimal.      

折扣支付部分拖后供给量的易变质物品经济批量模型

在假定备运期间费用函数为备运时间一般函数的前提下,将备运期和折扣率作为决策变量,建立了折扣支付部分拖后供给量的易变质物品经济批量模型,给出了寻求最优备运期、最优折扣率及最优订购周期的简单方法,并给出了参数的灵敏度分析和应用实例.