Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

一类新偶氮试剂的研究：Ⅴ.HQSAH催化荧光法测定Mn（Ⅱ）

基于Ｍｎ（Ⅱ）对试剂２－（８＇－羟基喹啉－５＇－磺基－７＇－偶氮基）－１－羟基－８－氨基一萘二磺酸（以下简称ＨＱＳＡＨ）分解反应的催化作用，提出了锰的荧光催化动力学分析新方法，其λｅｘ／ｅｍ＝２３０／４１５ｎｍ，适宜酸度范围为ｐＨ１１．０～１２．０，Ｍｎ（Ⅱ）含量在０～０．０８μｇ／ｍＬ呈线性关系，该法用于分析铸造铝合金中的痕量锰，效果良好。还初步探讨了反应机制，确定了反应动力学方程，测定了反应速率和活化能。     

Conformations and base-catalyzed equilibrations of N-nitroso-decahydroquinolines and N-nitroso-2-methyldecahydroquinolines

Conformations of six title compounds were determined by¹³C-NMR spectroscopy. Equilibration of the 2-methyl-compounds gives as main products the derivatives of the amines least abundant in the product mixture of the catalytic hydrogenation.

---

Konformation und Base-katalysierte Äquilibrierungen von N-Nitroso-decahydrochinolinen und N-Nitroso-2-methyl-decakydrochinolinen (Kurze Mitt.)

Zusammenfassung Die Konformationen der sechs Titelverbindungen wurden mittels¹³C-NMR Spektroskopie bestimmt. Äquilibrierung der 2-Methyl-verbindungen ergab als Hauptprodukte die Derivate der bei katalytischer Hydrierung in geringster Menge entstandenen Amine.

     

Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.     

Using ordinary differential equations system to solve isoconversional problems in non-isothermal kinetic analysis

The mathematical evaluation of the activation energy, E, of non-isothermal degradation reactions is usually made using the Ozawa/Flynn–Wall isoconversion principle and involves the numerical resolution of a set of integrals without closed form solution, which are solved by polynomial approximation or by numeric integration. In the present work, the isoconversion principle, originally described and maintained until now as an algebraic problem, was written as a set of ordinary differential equations (ODEs). The individual ODEs obtained are integrated by numeric methods and are used to estimate the activation energy of simulated examples. A least square error (LSE) objective function using the introduced ODEs was written to deal with multiple heating rate CaCO₃ thermal decomposition TG experiments.     

Review of time lag permeation technique as a method for characterisation of porous media and membranes

The time lag permeation technique has proven to bean effective method for characterisation. Because of the simple nature of the permeation experiment, transport parameters can be directly obtained from experimental data hence avoiding the intensive mathematical treatment required by other techniques. The method has historically been applied to diffusion and adsorption in porous membranes and diffusion in polymer membranes. Since its origins in 1920, interest in the time lag method has expanded because of its value in characterising simple permeation processes and also complex systems of diffusion with simultaneous adsorption and surface diffusion. This review focuses on presenting the asymptotic solution of the mass balance diffusion equations and includes applications of time lag analysis, in order to give a critical and broad perspective of this method as a tool for characterisation. It includes much of the previously published literature in order to show that for most cases the asymptotic solution of the transport equations is simple, and for more complex cases that an analytical solution is possible hence avoiding cumbersome numerical techniques.     

硝酸甲酯与不同亲核试剂的SN2反应的理论研究

用从头计算和半经验分子轨道ＡＭ１方法分别对系列亲核试剂和硝酸甲酯的电子结构以及它们之间的气相ＳＮ２反应进行了理论研究，揭示了反应过程中体系的结构，能量和电荷的递变规律，由反应活化能得了这些亲核试剂的亲核性次序为：ＯＨ＾－〉Ｆ＾－〉Ｉ＾－〉ＮＯ＾－３〉ＣＮ＾－〉Ｂｒ＾－〉Ｃｌ＾－〉Ｎ＾－３。     

Comparative quantum chemical studies in the framework of Gaussian approximations of the acidic characteristics of the simplest zeolite clusters and of the sulfuric acid molecule

Different variants of the Gaussian approximation, giving the energetic characteristics of molecules with chemical accuracy (±2 kcal mol^–1), are applied to calculations of the deprotonation energy of the sulfuric acid molecule in the gas phase as well as to the simplest clusters modeling the bridging hydroxyl groups in zeolites, The conclusion is made that the bridging hydroxyls am more acidic than the sulfuric acid molecule. The estimated range of deprotonation energy in zeolites (275±15 kcal mol^–1), is in good agreement with experimental data and with results ofab initio calculations for extended models including several tens of atoms. The effects of the quality of the basis set and electron correlation on deprotonation energy are also discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 7, pp. 1641–1647, July, 1996.     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

Synthesis and Characterization of Lead Sulfide Nanoparticles in Zirconia-Silica-Urethane Thin Films Prepared by the Sol-Gel Process

PbS nanocrystals (NCs) ranging between 4–8 nm were incorporated into Zirconium-Silica-Urethane (ZSUR) matrix obtained by the sol-gel method. The sizes of the particles were controlled by temperature treatment and by concentration of PbS in ZSUR matrix. The sizes of PbS NCs were determined by TEM measurements. The quantum size effect could also be extracted from optical absorption and photoluminescence spectra. The new matrix allows incorporation of up to 40% PbS forming a characteristic structure of dendrite by reacting lead acetate with ammonium thiocyanate in sol-gel matrix. The sol precursors of the matrix for Zirconium-Silica-Urethane contained zirconium oxide (ZrO₂) matrix solution, tetramethoxysilane (TMOS), 3-glycid oxypropyl trimethoxysilane (GLYMO) and polyethylene urethane silane (PEUS) synthesized separately. The ZrO₂ matrix solution was obtained from zirconium n-tetrapropoxide in propanol and acetic acid was used as a chelating agent to stabilize the zirconium oxide precursor.