用动力学方法研究8,9-苯并-2-亚甲基-1,4,6-三氧螺[4,4]壬烷的聚合反应机理

根据在自由基引发剂存在下,8,9-苯并-2-亚甲基-1,4,6-三氧螺(4,4)壬烷(Ⅰ)可能存在的竞争反应,推导了动力学方程式。用红外光谱法测定了单体的消失速率和苯酞的生成速率。实验结果与推导动力学方程式相符。进一步证明了单体(Ⅰ)的增长反应由加成聚合和开环—异构化—加成这两个反应组成。这两个反应对总速率的相对贡献与单体浓度有关。得到了共聚物的结构。     

光化学-荧光分析法研究——Ⅲ.片剂及注射液中安定的测定

本文提出了测定安定的光化学—荧光分析新方法。安定在含有十二烷基硫酸钠的稀硫酸介质中,经紫外光照射后,产物能发射荧光(=368nm,=476nm)。安定浓度在0～2.5μg/ml范围内,荧光强度与浓度成良好的线性关系。方法的相对标准偏差为1.5％,检出限为0.044μg/ml,可用于片剂及注射液中安定含量的测定。     

LaC_3~n(n=-1,0,+1)分子簇的理论研究(英文)

用密度泛函方法研究了ＬａＣ３ｎ（ｎ＝－１，０，＋１）分子簇的结构和稳定性，对这个四原子体系，提出了５种可能构型，其中３种具有Ｃ２ｖ对称性，２种为Ｃ∞ｖ对称性．在Ｃ２ｖ对称性结构中，其中１个为Ｌａ接在弯曲的Ｃ３链上，第２个是Ｌａ通过２个键与Ｃ３环相链，第３个是Ｌａ通过１个键与Ｃ３环相连；在Ｃ∞ｖ对称性中，第１个Ｌａ接在Ｃ３链的一端，而在第２个构型中，Ｌａ被插入在Ｃ３链中．结果表明，环状结构当Ｌａ接在弯曲的Ｃ３链上的是局域极小值并且最稳定     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

水热法制备高纯超细CeO2-ZrO2复合氧化物

Superfine composite powders of CeO₂-ZrO₂ (CZ) and CeO₂-ZrO₂-La₂O₃ (CZL) were prepared by hydrothermal method. The effects of pH、temperature and time for hydrothermal process on the performance of the resulting powders were studied. The optimized reaction parameters were on follows: the precursor′s pH≈9.0, hydrothermal temperature of 200 ℃ holding for 2 h. Thermal stable powders with average particle size smaller than 10 nm and specific surface area of 171 m²·g^-1 were obtained. A BET specific surface area was still at 44 m²·g^-1 after calcination at 1 000 ℃ for 6 hours.     

双波长K系数—标准加入吸光光度法同时测定锰和锌

研究应用双波长K系数—标准加入吸光光度法同时测定锰和锌二组分混合物.试验确定了锰和锌测定中K_(Mn)与K_(Zn)的回归方程.对合成试样、人发试样测定,结果满意.     

Analysis of thermal behaviour of high power semiconductor laser arrays by means of the finite element method (FEM)

New results of steady-state two-dimensional finite-element computations of temperature distributions of high power semiconductor laser arrays are presented. The influence of different thermal loads on the 2D temperature distribution in AlGaAs/GaAs gain-guided laser arrays is investigated. TheFEM model is tested by comparing it with analytical solutions. For numerical convenience, the latter is rewritten in a novel form, which is free of overflow problems. The maximum temperatures calculated by both methods agree within 1%. Several factors determining the thermal resistance of the device are quantitatively examined: the ratio of light emitting to non-emitting areas along the active zone, the amount of Joule losses, the current spreading, the solder thickness, and voids in the solder. This yields design rules for optimum thermal performance.     

Non-stoichiometry of YBa2Cu3O7-d Observed by Repeated Temperature Scanning

Repeated temperature scanning method was applied to observe non-stoichiometry of YBa₂Cu₃O₇-d, and interesting results were obtained. Two simultaneously occurring processes were separately observed in mass change; one is a fast process and the other is slow, so that their responses to the temperature change are quite different from each other. The fast process follows the cyclic temperature change, but the slow process is observed to be a gradual mass change. Kinetic behaviors of these two processes are also made clear by plotting the mass vs. the temperature. Furthermore, a hysteresis loop was observed in the plot of the mass vs. the temperature in a high temperature range presumably due to the third process, and it depends on the heating and cooling rates. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dynamic headspace liquid-phase microextraction of alcohols

A method was developed using dynamic headspace liquid-phase microextraction and gas chromatography-mass spectrometry for extraction and determination of 9 alcohols from water samples. Four different solvents, hexyl acetate, n-octanol, o-xylene and n-decane were studied as extractants. The analytes were extracted using 0.8 microl of n-octanol from the headspace of a 2 ml sample solution. The effect of sampling volume, solvent volume, sample temperature, syringe plunger withdrawal rate and ionic strength of the solution on the extraction performance were studied. A semiautomated system including a variable speed stirring motor was used to ensure a uniform movement of syringe plunger through the barrel. The method provided a fairly good precision for all compounds (5.5-9.3%), except methanol (16.4%). Detection limits were found to be between 1 and 97 microg/l within an extraction time of approximately 9.5 min under GC-MS in full scan mode.     

Intramolecular proton transfer induced by divalent alkali earth metal cation in the gas state

Interactions between divalent alkali earth metal (DAEM) ions M (M?Be, Mg, Ca, Sr, Ba) and the second stable glycine conformer in the gas phase, which can transfer into the ground‐state glycine‐M²⁺ (except the glycine–Be²⁺) among each corresponding isomers when these divalent metal ions are bound, are studied at the hybrid three‐parameter B3LYP level with three different basis sets. Proton transfers from the hydroxyl to the amino nitrogen of the glycine without energy barriers have been first observed in the gas phase in these glycine–M²⁺ systems. The interaction between the glycine and these DAEM ions except beryllium and magnesium ion only create an amino hydrogen pointing to the original hydroxyl due to their weaker interaction relative to those divalent transition metal (DTM) ion‐bound glycine derivatives, being obviously different from that between the glycine and DTM ions, in which two amino hydrogens point to the original hydroxyl oxygen when these metal‐chelated glycine derivatives are produced. The interaction energy between the glycine and divalent magnesium would be the boundary of one or two amino hydrogens pointing to the hydrogyl oxygen, i.e., the ?170.3 kcal/mol of binding energy is a critical point. Similar intramolecular proton transfer has also been predicted for those DTM ion‐chelated glycine systems; however, that in the gas state has not been observed in the monovalent metal ion‐coordinated glycine systems. The binding energy between some monovalent TM ion and the glycine is similar to that of the glycine–Ba²⁺, which has the lowest binding strength among these DAEM–ion chelated glycine complexes. The difference among them only lies in the larger electrostatic and polarized effects in the latter, which favor the stability of the zwitterionic glycine form in the gas phase. According to these observations, we predict that the zwitterionic glycine would exist in the field of two positive charges in the gas phase. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 205–214, 2003